Water Regulations Approval Scheme Ltd

Glass/Bottle Washers

Section Code 1310 : Machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the machine will determine any additional backflow protection that may be required.

Back To Directory Sections

WRAS Approval Number: #2005352

Range of commercial glass washing machines with flow controlled via a solenoid valve. The products are supplied with a dual layer supply hose (Grey PVC outer/Black PVC inner) with ¾” captive nuts at either end and a loose double check valve assembly (suitable for backflow protection against Fluid Category 3) for installation prior to the inlet hose. Maximum working pressure 4.0 Bar. Cold water use only.

Section:: 1310 Glass/Bottle Washers
WRAS Approval Number:: 2005352
Expiry date:: 31/05/2025
Size:: ¾” BSP (F) (to the supply hose)
Marking:: Model, manufacturers name and other technical information on data label on panel.
Installation Requirements:: R001 R009
Proviso:: Discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717. No detergents are to be used with these appliances that represent a Fluid Category risk that is greater than that provided by the dedicated backflow prevention device or arrangement upstream of the appliance. If this cannot be determined IRN R090 applies.
Model:: ASBER - GRAND EASY Range (electromechanical control glass-washers): GE-350 UK (*SA). GE-350 B UK (*SA). GE-350 DD UK (*SA). GE-350 B DD UK (*SA). GE-400 UK (*SA). GE-400 B UK (*SA). GE-400 DD UK (*SA). GE-400 B DD UK (*SA). ASBER - GRAND MITTE Range (electronic control glass-washers): GM-350 UK (*SA). GM-350 B UK (*SA). GM-350 DD UK (*SA). GM-350 B DD UK (*SA). GM-400 UK (*SA). GM-400 B UK (*SA). GM-400 DD UK (*SA). GM-400 B DD UK (*SA). ASBER - GRAND TECH Range (electronic control and temperature display glass-washers): GT-350 UK (*SA). GT-350 B UK (*SA). GT-350 DD UK (*SA). GT-350 B DD UK (*SA). GT-400 UK (*SA). GT-400 B UK (*SA). GT-400 DD UK (*SA). GT-400 B DD UK (*SA). AQUATEC - AQUATEC Range (electromechanical control glass-washers): AQUATEC G40DPN B DD UK Where 350 or 400 in the model code denotes baskets size, e.g. 350x350mm or 400x400mm. B = drain pump. DD = detergent doser. UK = English electrical plug. SA = stainless steel washing and rinse arms.
Manufacturer:: ONNERA POLAND Sp. z.o.o.

Company Name
ONNERA POLAND Sp. z.o.o.
Address
Palmiry Ul Warszawska 9 05-152
Country
Czosnow

View All Listings by this Company

WRAS Approval Number: #2006301

Range of floor standing commercial glass washers incorporating a solenoid valve controlling the flow. The product is supplied with a double check valve assembly (suitable for backflow protection against fluid category 3). Maximum working pressure 4.0 Bar. Maximum operating temperature 60°C.

Section:: 1310 Glass/Bottle Washers
WRAS Approval Number:: 2006301
Expiry date:: 30/06/2025
Size:: ¾” BSP Captive nut
Marking:: Comenda and Comenda logo on face. Coemnda and Comenda logo, pressure and other technical information on side panel.
Installation Requirements:: R001 R160
Model:: PB24, PB24 A, PB34, PB34 A, HB24, HB24 A, HB34 & HB34 A Where A denotes the inclusion of a softener.
Manufacturer:: COMENDA ALI GROUP SRL

Company Name
COMENDA ALI GROUP SRL
Address
VIA GALILEO GALILEI, 8 20060 CASSINA DE PECCHI MILAN
Country
ITALY

View All Listings by this Company

WRAS Approval Number: #2006364

Section:: 1310 Glass/Bottle Washers
WRAS Approval Number:: 2006364
Expiry date:: 30/06/2025
Size:: ¾” BSP Captive nut
Marking:: BLUE SEAL ON FRONT COVER BLUE SEAL ,model, pressure and other technical information on adhesive label on side panel.
Installation Requirements:: R001 R160
Model:: SG4 E2, SG45 E2, SG5EC2 & SD5 EC2 COMMERCIAL GLASS WASHERS
Factor:: Blue Seal Ltd

Company Name
Blue Seal Ltd
Address
Unit 67 Gravelly Business Park, Erdington, Birmingham
Postcode
B24 8TQ
Phone
0121-327 5575
General Email
sales@blue-seal.co.uk

View All Listings by this Company