Dosing Equipment
Section Code 0970 : Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed
Back To Directory Sections
WRAS Approval Number: #2110361
‘CD3 Series’ chlorine dioxide dosing system incorporating a single check valve positioned at the point of injection.
Maximum working pressure 6.0 bar. Cold water use only.
- Section:
- 0970 Dosing Equipment
- Section Subtitle:
- Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed
- WRAS Approval Number:
- 2110361
- Expiry date:
- 31/10/2026
- Size:
- 6mm pipe
- Marking:
- Culligan, CD3 series Chlorine Dioxide Generator & other information on body.
- Installation Requirements:
- R001 R120 R160 R170 R290 R415 R575
- Model:
-
CD3 – CL02 – 80G/HR.
CD3 – CL02 – 160G/HR.
CD3 – CL02 – 240G/HR.
CD3 – CL02 – 400G/HR.
- Factor:
- Culligan (UK) Ltd.
Company Name
Culligan (UK) Ltd.
Address
Halifax House
Coronation Road
High Wycombe
Postcode
HP12 3SE
Country
United Kingdom
Phone
01494 441286
General Email
commercial@culligan.co.uk
View All Listings by this Company
WRAS Approval Number: #2203343
Range of dosing pumps with plastic bodies.
Models PM004 & PM005 have a maximum operating pressure of 6.0 bar.
All other models have a maximum operating pressure of 10.0 bar.
Cold water use only.
- Section:
- 0970 Dosing Equipment
- Section Subtitle:
- Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed
- WRAS Approval Number:
- 2203343
- Expiry date:
- 31/03/2027
- Note:
- Only for use with AcquaSIL 2/15 solution.
- Size:
- Please refer to model.
- Marking:
- Acqua Brevetti logo (styalised B), serial number and date of manufacture (MM/YY) on body.
- Installation Requirements:
- R001 R008 R120 R150 R170 R290
- Model:
-
PM004 Minidue: ½” BSP (M).
PM005 Minidue: ½” BSP (F).
PM005S Minidue: ½” BSP (F).
PM0011S Minidue 3/4: ¾” BSP (M).
PM007S Minidue 360: ½” BSP (F).
PM006S Minidue Filtro: ½” BSP (F).
- Manufacturer:
- Acqua Brevetti SRL
Company Name
Acqua Brevetti SRL
Address
Via Molveno 8,
35035 Mestrino (PD)
Country
Italy
View All Listings by this Company
Back To Directory Sections Page 3 of 3