Heaters

Section Code 1400 : Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

Back To Directory Sections

#2101041

Gas fired water heaters incorporating a heat exchanger and flow sensor. The inlet incorporates a plastic strainer. The products are supplied with isolation valves for installation on the cold inlet and hot outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60˚C

Section:
1400 Heaters
Section Subtitle:
Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:
2101041
Size:
15mm Compression
Marking:
ECA on front of body. ECA. Model & technical information on adhesive label on side of body.
Installation Requirements:
R001 R140
Expiry date:
31/01/2026
Model:
8116180100 – Phoenix PH 11LT Water Heater.
Product Images
Approval Holder:
Emas Makina Sanayi A.S.
Company Name
Emas Makina Sanayi A.S.
Address
Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa
Postcode
45030
Country
Turkey
General Email
egecakmakci@emas.com.tr

View All Listings by this Company
Manufacturer:
Emas Makina Sanayi A.S.
Company Name
Emas Makina Sanayi A.S.
Address
Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa
Postcode
45030
Country
Turkey
General Email
egecakmakci@emas.com.tr

View All Listings by this Company

Print This Approval

#240504713

Range of direct fired water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:
1400 Heaters
Section Subtitle:
Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:
240504713
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
Company logo (AO Smith), model, and technical information on body.
Installation Requirements:
R001 R140
Expiry date:
31/05/2029
Model:
IR 12-160,IR 12-200,IR 20-160,IR 20-200,IR 24-245,IR 24-285,IR 32-245,IR 32-285 & IR 32-380
Product Images
Approval Holder:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company

Print This Approval

#240504714

Range of direct gas fired condensing storage water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:
1400 Heaters
Section Subtitle:
Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:
240504714
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
Company logo (A.O. Smith), model and technical information on body
Installation Requirements:
R001 R140
Expiry date:
31/05/2029
Model:
BFC 28, BFC 30, BFC 50, BFC 60, BFC 80, BFC 100, BFC 120, SGS 28, SGS 30,SGS 50, SGS 60, SGS 80, SGS 100 & SGS 120
Product Images
Approval Holder:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company

Print This Approval

#240504715

Range of solar assisted direct gas fired condensing storage water heaters with an enamel lining and a titanium anode incorporating a solar heat exchanger (max. working pressure 6,0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:
1400 Heaters
Section Subtitle:
Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:
240504715
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1½” BSP(M) inlet.
Marking:
Company logo (AO Smith), model and technical information on body.
Installation Requirements:
R001 R140
Expiry date:
31/05/2029
Model:
SGE 40 & SGE 60
Product Images
Approval Holder:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company

Print This Approval

#240504716

Range of indirect water heaters with an enamel lining, a magnesium sacrificial anode and single wall spiral heat exchanger (maximum working pressure 6.0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 7.0 bar. Maximum operating temperature 80°C

Section:
1400 Heaters
Section Subtitle:
Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:
240504716
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (F)
Marking:
Company logo (AO Smith), model and technical information on body.
Installation Requirements:
R001 R140
Expiry date:
31/05/2029
Model:
IT 1500, IT 2000, IT 2500, IT 3000, ST 1500, ST 2000, ST 2500 & ST 3000
Product Images
Approval Holder:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 1 of 3

© WRAS 2026 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.