Rubbers

Section Code 5365 : Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

Back To Directory Sections

#2101518

'EPDM4570‐70/Jinan Hongde Gasket Material'. Black coloured, compression moulded EPDM sheet material. Shore hardness 70. Tested in-radius 2.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2101518
Expiry date:
31/01/2026
Approval Holder:
Jinan Hongde Rubber Co., Ltd
Company Name
Jinan Hongde Rubber Co., Ltd
Address
Pingyin County Industrial Park, Jinan, Shandong
Country
China
Phone
+86-0531-83108111
General Email
xhd_rubber@sina.com

View All Listings by this Company

Print This Approval

#2103503

'60 EPDM 334 black 60 ShA' (shore hardness 60) and '70 EPDM 335 black 70 ShA' (shore hardness 70). Black coloured compression moulded EPDM materials. Tested in-radius 1.07mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2103503
Expiry date:
31/03/2026
Approval Holder:
Freudenberg Sealing Technologies GmbH & Co KG
Company Name
Freudenberg Sealing Technologies GmbH & Co KG
Address
Division O-Rings & Boots, Oberwihl 4, 79733 Görwihl
Country
Germany
Phone
+49 7754 701-0

View All Listings by this Company

Print This Approval

#2109501

`H34-50 to H34-70’. Range of black coloured, compression moulded EPDM rubber materials with a shore hardness of between 50 & 70. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2109501
Expiry date:
30/09/2026
Approval Holder:
Viant Elkhorn, Inc.
Company Name
Viant Elkhorn, Inc.
Address
248 West Centralia Street, Elkhorn, Wisconsin 53121
Country
USA
Phone
+1 262 7235470

View All Listings by this Company

Print This Approval

#2105501

'EP60-WAUK-FR'. Black coloured, compression moulded EPDM sheet material. Shore hardness 60. In-radius size 1.35mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2105501
Expiry date:
31/05/2026
Approval Holder:
ELASTOMEROS RIOJANOS, S.A.U. (ELASTORSA)
Company Name
ELASTOMEROS RIOJANOS, S.A.U. (ELASTORSA)
Address
Ctra. de Quel, 35, Apartado 48, 26580 Arnedo, La Rioja
Country
Spain

View All Listings by this Company

Print This Approval

#2105506

‘EPDM 825-c’. Black coloured, compression moulded EPDM sheet material. Shore hardness 80 A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2105506
Expiry date:
31/05/2026
Approval Holder:
Ein Shemer Rubber Industries A.C.A. Ltd
Company Name
Ein Shemer Rubber Industries A.C.A. Ltd
Address
D.N. Hefer 38816 Kibbutz Ein-Shemer
Country
Israel

View All Listings by this Company

Print This Approval

#2106506

'EP210107'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106506
Expiry date:
30/06/2026
Approval Holder:
Vortex Qingdao Pipe Fitting Co., Ltd.
Company Name
Vortex Qingdao Pipe Fitting Co., Ltd.
Address
No.4, chongxiang Road, Lancun Town, Jimo District, Qingdao, Shandong Province
Country
China

View All Listings by this Company

Print This Approval

#2106515

'OYRTEP7011PWRC'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106515
Expiry date:
30/06/2026
Approval Holder:
Toyokawa (Jinan) Machinery Co., Ltd.
Company Name
Toyokawa (Jinan) Machinery Co., Ltd.
Address
Xiuyuan Road, Zhangqiu, Jinan city
Country
China

View All Listings by this Company

Print This Approval

#2106518

'ZF-73'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106518
Expiry date:
30/06/2026
Approval Holder:
Wuxi Tongjiang Ruifeng Valve Seals Co.,Ltd.
Company Name
Wuxi Tongjiang Ruifeng Valve Seals Co.,Ltd.
Address
Building 20, No. 35 Yanqiao Road, Yanqiao street, Huishan district, Wuxi City, Jiangsu Province
Country
China

View All Listings by this Company

Print This Approval

#2106538

‘0250-35 (50A), 0260-35 (60A), 0270-44 (70A), 0280-22 (80A) and 0290-11 (90A)’. Black coloured, compression moulded EPDM materials. Shore hardness between 50A & 90A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106538
Expiry date:
30/06/2026
Approval Holder:
Industrial Rubber Ltd.
Company Name
Industrial Rubber Ltd.
Address
4 Fielder Drive, Newgate Lane Industrial Estate, Fareham, Hampshire
Postcode
PO14 1JE
Phone
01329 287955
General Email
info@industrial-rubber.com

View All Listings by this Company

Print This Approval

#2106543

‘5052911193 (50A), 5062911233 (60A), 5072911255 (70A), 5082911184 (80A) and 5092911126 (90A)’. Black coloured, compression moulded EPDM materials. Shore hardness between 50A & 90A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106543
Expiry date:
30/06/2026
Approval Holder:
Clwyd compounders Ltd.
Company Name
Clwyd compounders Ltd.
Address
1 Elm Point, Abbey Road North, Wrexham
Postcode
LL13 9UE

View All Listings by this Company

Print This Approval

#2108502

‘EW45, EW50, EW53, EW54, EW54W, EW55, EW60, EW65, EW70, EW75, EW80, EW81 & EW85’. Black coloured, compression moulded EPDM rubber materials. Shore hardness between 45 & 85. Tested in-radius size 1.4mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2108502
Expiry date:
31/08/2026
Approval Holder:
VIP Polymers Ltd.
Company Name
VIP Polymers Ltd.
Address
15 Windover Road, Huntingdon, Cambridgeshire
Postcode
PE29 7EB
Phone
01480 411 333
General Email
info@vip-polymers.com

View All Listings by this Company

Print This Approval

#2107558

'CEW50, CEW55, CEW60, CEW65, CEW70, CEW75, CEW80, CEW85 & CEW88'. Black coloured, transfer moulded EPDM rubber materials. Shore hardness between 50 & 88. Tested in-radius size 1.15mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2107558
Expiry date:
31/07/2026
Approval Holder:
VIP-Polymers (Shanghai) Ltd.
Company Name
VIP-Polymers (Shanghai) Ltd.
Address
No 196, Yang Guang Da Dao, Xinwu Economic Development Zone, Wuhu County Wuhu
Country
China

View All Listings by this Company

Print This Approval

#2107559

'CVE45, CVE48, CVE50, CVE52, CVE55, CVE60, CVE61, CVE65, CVE69, CVE70, CVE75, CVE78 & CVE80'. Black coloured, extruded, EPDM materials. Shore hardness between 45 & 80. Tested in-radius size 1.5mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2107559
Expiry date:
31/07/2026
Approval Holder:
VIP Polymers Ltd.
Company Name
VIP Polymers Ltd.
Address
15 Windover Road, Huntingdon, Cambridgeshire
Postcode
PE29 7EB
Phone
01480 411 333
General Email
info@vip-polymers.com

View All Listings by this Company

Print This Approval

#2108512

‘AquaFlex® T 5818’. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.1mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2108512
Expiry date:
31/08/2026
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2108518

'AquaFlex T 5817'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.1mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2108518
Expiry date:
31/08/2026
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2106547

'RVK EPDM EP 210107'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106547
Expiry date:
30/06/2026
Approval Holder:
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Company Name
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Address
PLOT 1B20,INDUSTRIAL VALLEY KING ABDULLAH ECONOMIC CITY RABIGH, JEDDAH 21911
Country
Saudi Arabia

View All Listings by this Company

Print This Approval

#2109505

'E0265'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.0mm. Between September 2021 and 3rd August 2022, the material was for use with water up to 23°C. Between 4th August 2022 and September 2026, the material is for use with water up to 50°C

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2109505
Expiry date:
30/09/2026
Approval Holder:
Semperit Technische Produkte GmbH
Company Name
Semperit Technische Produkte GmbH
Address
Bundesstrasse 26, 2632 Wimpassing
Country
Austria
Phone
+43 2630 310 0 Fax: +43 2630 475
General Email
office@semperit.at

View All Listings by this Company

Print This Approval

#2111506

'EBW-65'. Black coloured, compression moulded EPDM rubber material. Shore hardness 65. Tested in-radius size 0.98mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2111506
Expiry date:
30/11/2026
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2107571

'E701/A'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2107571
Expiry date:
31/07/2026
Approval Holder:
Duram Industries A.C. Ltd.
Company Name
Duram Industries A.C. Ltd.
Address
Kibbuts Ramat, Hakovesh, 44930
Country
Israel

View All Listings by this Company

Print This Approval

#2109544

'RCI EP 70'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 0.95mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2109544
Expiry date:
30/09/2026
Approval Holder:
Rubber Craft Industries
Company Name
Rubber Craft Industries
Address
J-294, Indaryani Nagar, MIDC Bhosari, Pune - 411026
Country
India

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 1 of 14

© WRAS 2026 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.