Section Code 5240 : Components. All components listed in this section have been tested for water contact suitability of material only.
Back To Directory Sections'EP EGEPLAST PE100 Pipe'. Black coloured, extruded PE100 pipe. For use with water up to 23°C.
'CIPHON HDPE PIPE PE100'. Black coloured (with blue stripe), extruded PE100 pipe. For use with water up to 65°C.
'OCTATHERM PE-RT Pipe'. Black coloured, extruded PE-RT pipe. For use with water up to 85°C.
'Diamant, Carat XL/XXL, Platin, Platin XL/XXL, Spring Water Shaft & Space-Saving Tank’ panels. White coloured (opaque), roto-moulded PE panels The approval includes panels manufactured in Germany (from September 2024 onwards) and France (from December 2024 onwards). For use with water up to 23°C.
'PE 7144 Plastic Sleeve'. Natural (appears white), injection moulded polyethylene component. For use with water up to 85°C.
'Aquapipe'. Black coloured, extruded HDPE (PE100) pipe. For use with water up to 23°C.
'Thermopex'. White coloured (with red stripe), extruded PEX pipe. For use with water up to 85°C.
'GPS F Black Pipe'. Black coloured, extruded PE80 pipe. For use with water up to 23°C.
'GPS K Blue PE80 pipe'. Blue coloured, extruded PE80 pipe. For use with water up to 23°C.
'GPS CRP100 Black Pipe'. Black coloured, extruded PE100 pipe. For use with water up to 23°C.
'GPS N Blue PE80 Pipe'. Blue coloured, extruded PE80 pipe. For use with water up to 23°C.
'ROMAPEX (Pipe PE-Xb EVOH 5L)'. Extruded, multi-layered pipe comprising of a white coloured PE-Xb inner layer, black coloured EVOH layer and white coloured PE-Xb outer layer. For use with water up to 85°C.
'JXPE100'. Black coloured, extruded HDPE pipe. For use with water up to 65°C.
'Donghailong PE Tank Panel'. White coloured, polyethylene panel manufactured by blow moulding. For use with water up to 23°C.
'Wavin PE-RT Pipe'. Extruded, off-white coloured (opaque) PE-RT pipe. For use with water up to 65°C.
'ELBOR Fittings'. Black coloured, injection moulded PE fittings. For use with water up to 65°C.
'SAS HDPE Pipe'. Black coloured (with blue external stripe), extruded HDPE pipes. For use with water up to 85°C.
'CL HDPE Pipe'. Black coloured, extruded HDPE pipes. For use with water up to 23°C.
'CL HDPE Fitting EF'. Black coloured, injection moulded, HDPE electrofusion fittings. For use with water up to 23°C.
'Cosmoplast PEX-b Pipe'. White coloured, extruded PEX-b pipe. For use with water up to 85°C.
'DAVANT'. Extruded, multi-layered pipe comprising of a white coloured PE-Xb inner layer, black coloured EVOH layer and white coloured PE-Xb outer layer. For use with water up to 85°C.
'SUDA HDPE Fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'Draka Comteq Cable Sheath: R607581 and R698927. Black coloured, extruded polyethylene cable sheath. For use with water up to 85°C.
‘Georg Fischer (+GF+) HDPE PE100 Pipes and ‘Hepworth MDPE PE80 Pipes’. Black coloured (with or without blue stripes), extruded PE100 pipes. Black coloured, extruded PE80 pipes. For use with water up to 60°C.
'HEPWORTH Pipe'. Black coloured, extruded LDPE pipe. For use with water up to 60°C.
'Hepworth MDPE PE 80 Black Pipe'. Black coloured (with blue external stripes), extruded MDPE pipe. For use with water up to 60°C.
'Polyfab PE100 Pipe' (manufactured by Polyfab Plastic Industry LLC in Ajman & Kizad). Black coloured (with blue external stripes), extruded PE100 pipe. For use with water up to 85°C.
'Polyfab PE100 Fittings' (manufactured by Polyfab Plastic Industry LLC in Ajman & Kizad). Black coloured, injection moulded PE100 fittings. For use with water up to 85°C.
'Plast Butt Fusion Fittings'. Black coloured, injection moulded HDPE butt fusion fittings. For use with water up to 85°C.
+GF+ MDPE PE 80 Black Pipe'. Black coloured (with blue external stripes), extruded MDPE pipe. For use with water up to 60°C.
‘+GF+ HDPE PE100 Pipes' and '+GF+ MDPE PE80 Pipes’. Black coloured (with or without blue stripes), extruded PE100 pipes. Black coloured, extruded PE80 pipes. For use with water up to 60°C.
'+GF+'. Black coloured, extruded LDPE pipe. For use with water up to 60°C.
'PF HDPE Fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'ELGEF PLUS'. Black coloured, injection moulded HDPE electrofusion and spigot fittings. For use with water up to 60°C.
'CR-01 PE Pipe'. Blue coloured, extruded PE pipe. For use with water up to 23°C.
'CR-02 PE Fitting'. Blue coloured, injection moulded PE fitting. For use with water up to 23°C.
'FLEXIPOL MASA'. Black coloured (with blue stripes), extruded polyethylene pipes. For use with water up to 60°C. The 'FLEXIPOL MASA' pipes covered by the scope of this approval are marked with 'V63'. 'FLEXIPOL MASA' pipes which are not marked with 'V63' are not covered by the scope of this approval.
'Kasta® HDPE PE 100 Pipe (Black)'. Black coloured (with blue external stripes), extruded HDPE pipe. For use with water up to 65°C.
'Egelen PE100 & Egeplast 9010 pipes'. Egelen PE100 is a single layered, black coloured, extruded PE100 pipe. Egeplast 9010 is a dual layered, extruded PE100 pipe consisting of a black coloured inner layer and a blue coloured outer layer. For use with water up to 23°C.
'PE-B-01 Inlet Pipe'. Blue coloured, injection moulded Polyethylene pipe. For use with water up to 85°C.
'PE-R-02 Outlet Pipe'. Red coloured, injection moulded Polyethylene pipe. For use with water up to 85°C.
'PE-R-01 Thermocouple Protection Tube'. Red coloured, injection moulded Polyethylene tube. For use with water up to 85°C.
'Seiger PEX-Al-PEX Pipe'. Extruded PEX-Al-PEX pipe comprising of a natural (appears off-white) inner, aluminium middle layer and white coloured outer layer. For use with water up to 85°C.
'Omanplast HDPE Pipe'. Black coloured (with blue external stripes), extruded HDPE pipe (manufactured in Muna Noor Manufacturing & Trading LLC, Sohar & Muna Noor Manufacturing & Trading LLC, Rusayl, Oman). For use with water up to 60°C.
'Ori-Plast Electro-Fusion Fittings'. Black coloured, injection moulded PE 100 Electro-Fusion Fittings. For use with water up to 65°C.
'MISURATA Polyethylene Pipe'. Black coloured (with blue stripe), extruded Polyethylene pipe. For use with water up to 23°C.
'Polycon 3 Layer Standard Water Tank Panel' and 'Polycon 4 Layer Insulated Water Tank Panel'. LLDPE tank panels made by roto-moulding. The 3 layered panel has a white coloured (opaque) inner layer, black coloured (opaque) middle layer and white coloured (opaque) outer layer. The 4 layered panel has a white coloured (opaque) inner layer, black coloured (opaque) second layer, off-white coloured (opaque) third layer and white coloured (opaque) outer layer. Both panels are for use with water up to 85°C.
'AMIANTIT HDPE Pipe'. Black coloured (with blue stripe), extruded HDPE pipe. For use with water up to 50°C. Please note that only pipes marked with 'HE3490' are covered by the scope of the approval.
'SCGC HDPE H112PC'. Black coloured, extruded HDPE pipe. For use with water up to 85°C.
'CL HDPE Buttfusion Fittings'. Black coloured, injection moulded HDPE Buttfusion Fittings. For use with water up to 23°C.
Page 8 of 9
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
