Range of pre-assembled hydraulic blocks incorporating plate heat exchangers, pressure relief valves set at 3.0 bar, circulation pumps and flow regulators. Maximum working pressure: Primary 2.5bar & secondary 10 bar. Maximum operating temperature 80°C (CH) & 60°C (DHW).

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm & 22mm Compression.

Marking:

Bosch, model code and other technical information on adhesive label on assembly.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

8-718-684-683.

Approval Holder:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

View All Listings by this Company

Manufacturer:

Bosch Thermotechnik GmbH

Company Name

Bosch Thermotechnik GmbH

Address

Sophienstrasse 30 - 32 D-35576 Wetzlar Germany

View All Listings by this Company

Type ‘J’ range of plate heat exchangers with stainless steel (AISI 304L or AISI 316L) fin and end plates. Maximum working pressure 3.0 bar (primary circuit) and 10.0 bar (secondary circuit). Maximum operating temperature 80°C.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) Primary circuit. ½” BSP (M) Sanitary circuit.

Marking:

Condevo S.p.A. and model on adhesive label on body

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

Type ‘J’ range comprising of: PP10FJX. PP12FJX. PP14FJX. PP16FJX. PP18FJX. PP20FJX. PP22FJX. PP24FJX. PP26FJX. PP28FJX. PP30FJX. PP32FJX. PP34FJX. X denotes the body material and is replaced with: 4 = AISI304L 6 = AISI316L

Approval Holder:

Condevo SpA

Company Name

Condevo SpA

Address

Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company

Range of copper brazed, stainless steel (316) heat exchangers in various sizes (4-300 plates, see models). Maximum working pressure: see models. Maximum operating temperature: 99°C.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” - 3” BSP (M).

Marking:

SWEP, models, PN and tech info on adhesive label on body

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

X8T-SC-S - Number or Plates: MIN 4 – MAX 60, Max Flow rate – 4 m3/h - ½”, ¾” - 32/26bar. 10T-SC-M - Number or Plates: MIN 4 – MAX 140, Max Flow rate – 9 m3/h - 3/8” to 1 ¼” - 41/36bar. 15T-SC-M - Number or Plates: MIN 4 – MAX 60, Max Flow rate – 4 m3/h - ½” to 1” - 45/45bar. 16DW-SC-S - Number or Plates: MIN 4 – MAX 140, Max Flow rate – 11,3 m3/h ½” to 1 ¼” - 16/16bar. 16DW-SC-M - Number or Plates: MIN 4 – MAX 140, Max Flow rate – 11,3 m3/h - ½” to 1 ¼” - 45/45bar. 220-SC-S - Number or Plates: MIN 4 – MAX 300, Max Flow rate – 39 m3/h 1” to 2 ½” -25/25bar. 320HT-SC-S - Number or Plates: MIN 4 – MAX 300, Max Flow rate – 61,7 m3/h - 1 ½” to 2 ½” - 33/29bar. 320LT-SC-S - Number or Plates: MIN 4 – MAX 260, Max Flow rate – 76,2 m3/h - 1 ½” to 3” - 25/25bar.

Approval Holder:

SWEP International AB

Company Name

SWEP International AB

Address

Järvgatan 3B, Box 105, 26122 Landskrona

Country

Sweden

View All Listings by this Company

Manufacturer:

SWEP International AB/SWEP Slovakia s.r.o.

Company Name

SWEP International AB/SWEP Slovakia s.r.o.

Address

Box 105, 26122, Landskrona

Country

Sweden

Phone

+46 418400406

View All Listings by this Company