Rubbers

Section Code 5365 : Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

Back To Directory Sections

#240955014

'E13970'. Black coloured, injection moulded EPDM material. Shore hardness 65. Tested in-radius size 1.3mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240955014
Expiry date:
30/09/2029
Approval Holder:
Berwin Polymer Processing Group
Company Name
Berwin Polymer Processing Group
Address
Broadway, Globe Lane Industrial Estate, Dukinfield, Cheshire
Postcode
SK16 4UJ

View All Listings by this Company

Print This Approval

#240955049

'F3352'. Black coloured, compression moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 0.65mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240955049
Expiry date:
30/09/2029
Approval Holder:
Qingyang Ruibo Rubber Seal Products Factory
Company Name
Qingyang Ruibo Rubber Seal Products Factory
Address
No. 1 Economic Development Qingyang, Anhui Province
Country
China

View All Listings by this Company

Print This Approval

#241055049

'ERA10-2 SEALING'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055049
Expiry date:
31/10/2029
Approval Holder:
ERA Piping (Zhejiang) Co.,Ltd.
Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company

Print This Approval

#241055059

'EP80R-01'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.5mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055059
Expiry date:
31/10/2029
Approval Holder:
Jinan Lide Rubber & Plastic Co. Ltd.
Company Name
Jinan Lide Rubber & Plastic Co. Ltd.
Address
Pingyin Industrial Park, Yushan Zone, Jinan
Country
China

View All Listings by this Company

Print This Approval

#240955062

'EPWL-60'. Black coloured, injection moulded EPDM material. Shore hardness 60. Tested in-radius size between 1.25mm & 5.25mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240955062
Expiry date:
30/09/2029
Approval Holder:
Duram Industries A.C. Ltd.
Company Name
Duram Industries A.C. Ltd.
Address
Kibbuts Ramat, Hakovesh, 44930
Country
Israel

View All Listings by this Company

Print This Approval

#250155008

'ME0940/40 - 90'. Black coloured, injection moulded EPDM rubber material. Shore hardness between 40 & 90. Tested in-radii sizes between 1.0mm & 3.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250155008
Expiry date:
31/01/2030
Approval Holder:
Elastotech s.r.l.
Company Name
Elastotech s.r.l.
Address
Via Provinciale, 92/94, 24060 Castelli Calepio (BG)
Country
Italy
Phone
0039 - 035 - 4496000

View All Listings by this Company

Print This Approval

#250455005

'OLD ETP890 70N'. Black coloured, injection moulded EPDM rubber. Shore hardness 70. Tested in-radius size 1.11mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250455005
Expiry date:
30/04/2030
Approval Holder:
Oldrati Guarnizioni Industriali Spa
Company Name
Oldrati Guarnizioni Industriali Spa
Address
Via Quarenghi 2, 24060 Villongo (Bergamo)
Country
Italy
Phone
+39 035 939213 Fax: +39 035 939613

View All Listings by this Company

Print This Approval

#240955066

'EPWL-70'. Black coloured, injection moulded EPDM material. Shore hardness 70. Tested in-radius size between 1.25mm & 5.25mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240955066
Expiry date:
30/09/2029
Approval Holder:
Duram Industries A.C. Ltd.
Company Name
Duram Industries A.C. Ltd.
Address
Kibbuts Ramat, Hakovesh, 44930
Country
Israel

View All Listings by this Company

Print This Approval

#240255057

'3E60B11P & 3E70B03P'. Black coloured, compression moulded EPDM materials. Shore hardness 60 & 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240255057
Expiry date:
28/02/2029
Approval Holder:
Blatt & Co GmbH
Company Name
Blatt & Co GmbH
Address
IM Klauenfuss 16, D 74172 Neckarsulm
Country
Germany
Phone
Tel: +49 7132 976117

View All Listings by this Company

Print This Approval

#2303560

‘0548’. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. Between March 2023 and August 2023, the material was for use with water up to 23°C. Between September 2023 and March 2028, the material is for use with water up to 80°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2303560
Expiry date:
31/03/2028
Approval Holder:
Wilhelm Kachele GmbH
Company Name
Wilhelm Kachele GmbH
Address
Jahnstrasse 9, D-73235 Wilhelm Teck
Country
Germany
Phone
Tel: +49 7023 2038 Fax: +49 7023 103 188

View All Listings by this Company

Print This Approval

#241055077

'EP80R-01'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.5mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055077
Expiry date:
31/10/2029
Approval Holder:
ATUSA GRUPO EMPRESARIAL, S.A.
Company Name
ATUSA GRUPO EMPRESARIAL, S.A.
Address
Pol. Industrial ATUSA-Agurain, S/N 01200 Salvatierra (Álava- España)
Phone
+34 945 18 00 00
General Email
info@atusa.es

View All Listings by this Company

Print This Approval

#241155036

'798F'. Black coloured, injection moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241155036
Expiry date:
30/11/2029
Approval Holder:
Trelleborg Pipe Seals
Company Name
Trelleborg Pipe Seals
Address
Pascallaan 80, 8218NJ Lelystad
Country
Netherlands

View All Listings by this Company

Print This Approval

#250155010

'E50B01, E70B01 & E80B01'. Black coloured, compression moulded EPDM material. Shore hardness between 50, 70 & 80. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250155010
Expiry date:
31/01/2030
Approval Holder:
Suzhou Chengda Rubber Co. Ltd.
Company Name
Suzhou Chengda Rubber Co. Ltd.
Address
No. 25 Yue Yang Road, Yue Wang Industry Zone, Shaxi Zhen, Taicang City
Country
China

View All Listings by this Company

Print This Approval

#240755071

'CERULEAN EP 14 (KIEP14)'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755071
Expiry date:
31/07/2029
Approval Holder:
Industrial Spares Manufacturing and Trading Co.
Company Name
Industrial Spares Manufacturing and Trading Co.
Address
66 & 77, Functional Developed Plots, Perungudi, Chennai 600096
Country
India

View All Listings by this Company

Print This Approval

#241255023

'8550C'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241255023
Expiry date:
31/12/2029
Approval Holder:
Tianjin Qichang Valve Manufacturing Co., Ltd.
Company Name
Tianjin Qichang Valve Manufacturing Co., Ltd.
Address
No.16, Huoju Rd, Beizhakou Economic Development Zone, Jinnan District, Tianjin
Country
China

View All Listings by this Company

Print This Approval

#241255031

'EP55 & EP70'. Black coloured, compression moulded EPDM materials. Shore hardness 55 & 70. Tested in-radii size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241255031
Expiry date:
31/12/2029
Approval Holder:
Umm Al Quwain Rubber Industries Ltd (URIL)
Company Name
Umm Al Quwain Rubber Industries Ltd (URIL)
Address
PO Box 79, Umm Al Quwain
Country
United Arab Emirates
Phone
Tel: +791 6671320 Fax: +791 6671221

View All Listings by this Company

Print This Approval

#250255013

'51M6630'. Black coloured, injection moulded EPDM material. Shore hardness 70A. Tested in-radius size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250255013
Expiry date:
28/02/2030
Approval Holder:
WOCO GmbH & Co. KG
Company Name
WOCO GmbH & Co. KG
Address
Hanauer Landstraße 16, D 63628 Bad Soden - Salmünster
Country
Germany
Phone
Tel: +49 605678441 Fax: +49 605678274

View All Listings by this Company

Print This Approval

#241255041

'EPDM50P - ELAST45901, EPDM60P - ELAST46901, EPDM70P - ELAST47901 & EPDM80P - ELAST48901’. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 80. Tested in-radius size 1.3mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241255041
Expiry date:
31/12/2029
Approval Holder:
SPC Corporate Ltd.
Company Name
SPC Corporate Ltd.
Address
Cory Way, West Wiltshire Trading, Westbury, Wiltshire
Postcode
BA13 4QT

View All Listings by this Company

Print This Approval

#241255065

'CSTD/BS6920-BA60' (shore hardness 60), 'CSTD/BS6920-BA70' (shore hardness 70) and 'CSTD/BS6920-BA75' (shore hardness 75). Black coloured, compression moulded EPDM materials. Tested in-radius size 1.05mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241255065
Expiry date:
31/12/2029
Approval Holder:
Zeta Kaucuk A.S.
Company Name
Zeta Kaucuk A.S.
Address
Hasanaga OSB Mah.14. Cadde 12/2 Nilufer, Bursa
Country
Turkey

View All Listings by this Company

Print This Approval

#250255017

'Precision782628 EPDM'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250255017
Expiry date:
28/02/2030
Approval Holder:
Guangzhou Precision Rubber & Plastic Co., Ltd.
Company Name
Guangzhou Precision Rubber & Plastic Co., Ltd.
Address
No. 1-6, Qishan Huancun Middle Street, Xiuquan Avenue, Huadu District, Guangzhou City, Guangdong Province
Country
China

View All Listings by this Company

Print This Approval

#250255026

'E633'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250255026
Expiry date:
28/02/2030
Approval Holder:
Semperit Technische Produkte GmbH
Company Name
Semperit Technische Produkte GmbH
Address
Bundesstrasse 26, 2632 Wimpassing
Country
Austria
Phone
+43 2630 310 0 Fax: +43 2630 475
General Email
office@semperit.at

View All Listings by this Company

Print This Approval

#250355017

'EP011470P(KAWN)'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250355017
Expiry date:
31/03/2030
Approval Holder:
Chang Horing Rubber Co., Ltd.
Company Name
Chang Horing Rubber Co., Ltd.
Address
No 38 Lu-Gong South 3 Road, Lu-Kang Town, Changhua Hsien
Country
Taiwan
Phone
+886 4 7810868

View All Listings by this Company

Print This Approval

#250355026

'LETW70 - KALT70'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.75mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250355026
Expiry date:
31/03/2030
Approval Holder:
Comet Srl
Company Name
Comet Srl
Address
Via Fogliano, Trav I, 12, 25030 Coccaglio (BS)
Country
Italy
Phone
+39 035 933535
General Email
comet@cometsre.com

View All Listings by this Company

Print This Approval

#241255075

'51M7568'. Black coloured, injection moulded EPDM material. Shore hardness 75 ShA. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241255075
Expiry date:
31/12/2029
Approval Holder:
WOCO GmbH & Co. KG
Company Name
WOCO GmbH & Co. KG
Address
Hanauer Landstraße 16, D 63628 Bad Soden - Salmünster
Country
Germany
Phone
Tel: +49 605678441 Fax: +49 605678274

View All Listings by this Company

Print This Approval

#250455013

'AA7BCZ'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250455013
Expiry date:
30/04/2030
Approval Holder:
Gummiwerk KRAIBURG GmbH & Co. KG
Company Name
Gummiwerk KRAIBURG GmbH & Co. KG
Address
Teplitzer Strasse 20 D – 84478 Waldkraiburg
Country
Germany
Phone
+49 8638 61-0
General Email
info@kraiburg-rubber-compounds.com

View All Listings by this Company

Print This Approval

#250455028

'R210WM'. Black coloured, injection moulded EPDM material. Shore hardness 70. Tested in-radius size 1.2mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250455028
Expiry date:
30/04/2030
Approval Holder:
Van Ryn Rubber Holdings (Pty) Ltd.
Company Name
Van Ryn Rubber Holdings (Pty) Ltd.
Address
6 Dawnhill Road, Maxmead, Pinetown, Kwazulu Natal, 3610
Country
South Africa

View All Listings by this Company

Print This Approval

#250355086

'D0012'. Black coloured EPDM material manufactured by vulcanisation moulding. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250355086
Expiry date:
31/03/2030
Approval Holder:
Universal Hardware & Plastic Factory Limited (The)
Company Name
Universal Hardware & Plastic Factory Limited (The)
Address
Unit A & D, 22/F, Nathan Commercial Building, No. 430-436 Nathan Road, Kln.H.K
Country
China

View All Listings by this Company

Print This Approval

#250455035

'EPW50, EPW55, EPW60, EPW65, EPW70, EPW75 & EPW80'. Black coloured, injection moulded EPDM material. Shore hardness between 50 & 80. Tested in-radius 2.95mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250455035
Expiry date:
30/04/2030
Approval Holder:
Harltex Ltd.
Company Name
Harltex Ltd.
Address
Unit 12, Norman-D-Gate Industrial Estate, Northampton
Postcode
NN1 5NT

View All Listings by this Company

Print This Approval

#250355087

'ZXMFJ-50 SEALING'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius 1.25mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250355087
Expiry date:
31/03/2030
Approval Holder:
Baoding Zhongxing Seals Manufacturing Co., Ltd.
Company Name
Baoding Zhongxing Seals Manufacturing Co., Ltd.
Address
Da CiLiang, Xushui District, Baoding City, Hebei Province
Country
China

View All Listings by this Company

Print This Approval

#240755075

'70EP505p'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755075
Expiry date:
31/07/2029
Approval Holder:
Baodetec Rubber Tech (Fujian) Co., Ltd.
Company Name
Baodetec Rubber Tech (Fujian) Co., Ltd.
Address
No.47 Kunlun ountain Road, Zhang zhou Development Zone, Fujian
Country
China

View All Listings by this Company

Print This Approval

#250555022

'EPDM-50AA2, EPDM-60AA2, EPDM-70AA2, EPDM-80AA2 & EPDM-85AA2'. Black coloured, compression moulded EPDM materials. Shore hardness between 50 ShA & 85 ShA. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250555022
Expiry date:
31/05/2030
Approval Holder:
Prabhat Elastomers Pvt. Ltd.
Company Name
Prabhat Elastomers Pvt. Ltd.
Address
'Prabhat Bhavan', 96 L.B.S. Marg, Vikhroli West, Mumbai, Maharashtra 400083
Country
India
Phone
+91 22 3294 6102
General Email
prabhatin@vsnl.com

View All Listings by this Company

Print This Approval

#250455056

'EPDM E293'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250455056
Expiry date:
30/04/2030
Approval Holder:
TRP Sealing Systems Ltd.
Company Name
TRP Sealing Systems Ltd.
Address
24 Netherwood Road, Rotherwas Industrial Estate, Hereford
Postcode
HR2 6JU

View All Listings by this Company

Print This Approval

#250655011

'LR33'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.25mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250655011
Expiry date:
30/06/2030
Approval Holder:
Duflon Industries Pvt. Ltd.
Company Name
Duflon Industries Pvt. Ltd.
Address
C101 MIDC Mahad, Dist, Raigad 402302, Maharashtra
Country
India

View All Listings by this Company

Print This Approval

#240755076

'N57140'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755076
Expiry date:
31/07/2029
Approval Holder:
Gulf Rubber Group - Tumedei SpA
Company Name
Gulf Rubber Group - Tumedei SpA
Address
Via Bolzano 12, 38061 Ala (TN)
Country
Italy

View All Listings by this Company

Print This Approval

#250655012

'1EP6052'. Black coloured, injection moulded EPDM material. Shore hardness 60. Tested in-radius size 1.12mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250655012
Expiry date:
30/06/2030
Approval Holder:
Sanok Rubber Company S.A.
Company Name
Sanok Rubber Company S.A.
Address
ul. Przemyska 24, 38-500 Sanok
Country
Poland

View All Listings by this Company

Print This Approval

#250455059

'EPDM2019'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250455059
Expiry date:
30/04/2030
Approval Holder:
Qingdao Yuanli Sealing Technology Co., Ltd.
Company Name
Qingdao Yuanli Sealing Technology Co., Ltd.
Address
Xinzhuang Industrial Park, Zhuhai Office, Huangdao District, Qingdao City, Shandong Province
Country
China

View All Listings by this Company

Print This Approval

#2212577

‘51M5577, 51M6077, 51M6577, 51M7077, 51M7577, 51M8077, 51M8577’. Black coloured, injection moulded EPDM materials. Shore hardness between 55A & 85A. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2212577
Expiry date:
31/12/2027
Approval Holder:
Effbe France
Company Name
Effbe France
Address
153 Rue du General de Gaulle, 68440 Habsheim
Country
France

View All Listings by this Company

Print This Approval

#250655018

'ASHUTOSH EPDM 50' & 'ASHUTOSH EPDM 80'. Black coloured, compression moulded EPDM materials with a shore hardness of 50 & 80. Tested in-radius size 1.2mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250655018
Expiry date:
30/06/2030
Approval Holder:
Ashutosh Rubber Pvt. Ltd.
Company Name
Ashutosh Rubber Pvt. Ltd.
Address
2515 - 2516, Lodhika GIDC Industrial Estate, Inside First Gate, H-1 Road, Metoda, Kalawad Road, Rajkot - 360 021, Gujarat
Country
India

View All Listings by this Company

Print This Approval

#250555047

'NER EPDM - 80'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250555047
Expiry date:
31/05/2030
Approval Holder:
National Engineering Industries Ltd. (Rubber Division)
Company Name
National Engineering Industries Ltd. (Rubber Division)
Address
2 Beerpara Lane, Dum Dum, Kolkata 700030
Country
India

View All Listings by this Company

Print This Approval

#250555048

'HC-EP7001165PWRC'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250555048
Expiry date:
31/05/2030
Approval Holder:
Tongling Huachang Industrial and Mining Accessories Co., Ltd.
Company Name
Tongling Huachang Industrial and Mining Accessories Co., Ltd.
Address
No.88, Ba Bai Road, Economic Development Zone, Yian District, Tongling City, Anhui Province
Country
China

View All Listings by this Company

Print This Approval

#260155001

'51M6767'. Black coloured, injection moulded EPDM material. Shore hardness 67. Tested in-radius size 0.5mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
260155001
Expiry date:
31/01/2031
Approval Holder:
WOCO GmbH & Co. KG
Company Name
WOCO GmbH & Co. KG
Address
Hanauer Landstraße 16, D 63628 Bad Soden - Salmünster
Country
Germany
Phone
Tel: +49 605678441 Fax: +49 605678274

View All Listings by this Company

Print This Approval

#260155002

'51M5567'. Black coloured, injection moulded EPDM material. Shore hardness 55. Tested in-radius size 0.5mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
260155002
Expiry date:
31/01/2031
Approval Holder:
WOCO GmbH & Co. KG
Company Name
WOCO GmbH & Co. KG
Address
Hanauer Landstraße 16, D 63628 Bad Soden - Salmünster
Country
Germany
Phone
Tel: +49 605678441 Fax: +49 605678274

View All Listings by this Company

Print This Approval

#241255076

'CSTD/BS6920-BA60' (shore hardness 60), 'CSTD/BS6920-BA70' (shore hardness 70) and 'CSTD/BS6920-BA75' (shore hardness 75). Black coloured, compression moulded EPDM materials. Tested in-radius size 1.05mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241255076
Expiry date:
31/12/2029
Approval Holder:
Gif Plastik Sanayi Ticaret Ltd. Sti
Company Name
Gif Plastik Sanayi Ticaret Ltd. Sti
Address
Kayapa OSB Mah. Nergiz (530) Cad. No. 7, Nilufer, Bursa 16315
Country
Turkey

View All Listings by this Company

Print This Approval

#260155003

'TWK3628'. Black coloured, injection moulded EPDM material. Shore hardness 67. Tested in-radius size 0.5mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
260155003
Expiry date:
31/01/2031
Approval Holder:
Polymer-Technik Elbe GmbH
Company Name
Polymer-Technik Elbe GmbH
Address
Heuweg 5, 06886 Lutherstadt Wittenberg
Country
Germany
Phone
+49-3491-659-155

View All Listings by this Company

Print This Approval

#250555057

'07148-60'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250555057
Expiry date:
31/05/2030
Approval Holder:
Gulf Rubber Group - Tumedei SpA
Company Name
Gulf Rubber Group - Tumedei SpA
Address
Via Bolzano 12, 38061 Ala (TN)
Country
Italy

View All Listings by this Company

Print This Approval

#250755026

'SML-EP012EB'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C. When processing an application for WRAS Product Approval the in-radius tolerance rule cannot be applied, i.e. only the material with an in-radius of 1.0mm is covered by the scope of the approval.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250755026
Expiry date:
31/07/2030
Approval Holder:
Suzhou Meilong Rubber & Plastic Products Co., Ltd
Company Name
Suzhou Meilong Rubber & Plastic Products Co., Ltd
Address
No.2 Zone 1,WeiBei Industrial Zone, Yudai Road, WeiTang Town, XiangCheng District, SuZhou City, JiangSu Province
Country
China

View All Listings by this Company

Print This Approval

#250755029

'EPDM SP-002 SEALING'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250755029
Expiry date:
31/07/2030
Approval Holder:
Huachuang Rubber (Tianjin) Co., Ltd.
Company Name
Huachuang Rubber (Tianjin) Co., Ltd.
Address
No. 36, 3rd Road, Xiaozhan Industrial Zone, Jinnan District, Tianjin City
Country
China

View All Listings by this Company

Print This Approval

#250655040

'AP-EPDM 50A, AP-EPDM 60A, AP-EPDM 70A & AP-EPDM 80A'. Black coloured, compression moulded EPDM materials. Shore hardness between 50A & 80A. Tested in-radius size between 1.15mm & 1.21mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250655040
Expiry date:
30/06/2030
Approval Holder:
AGAM Polymers Private Limited
Company Name
AGAM Polymers Private Limited
Address
30/37 A, West Patel Nagar, New Delhi -110008
Country
India

View All Listings by this Company

Print This Approval

#2307545

'EP 70110 HC'. Black coloured, compression moulded EPDM rubber. Shore hardness 70. Tested in-radius size 1.56mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307545
Expiry date:
31/07/2028
Approval Holder:
Zenith Industrial Rubber Products Pvt. Ltd.
Company Name
Zenith Industrial Rubber Products Pvt. Ltd.
Address
141/144, 14th Floor, Free Press House, Free Press Journal Marg, 215 Nariman Point, Mumbai - 400 021
Country
India

View All Listings by this Company

Print This Approval

#250755046

'51M5536'. Black coloured, injection moulded EPDM material. Shore hardness 55 ShA. Tested in-radius size 0.5mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250755046
Expiry date:
31/07/2030
Approval Holder:
WOCO GmbH & Co. KG
Company Name
WOCO GmbH & Co. KG
Address
Hanauer Landstraße 16, D 63628 Bad Soden - Salmünster
Country
Germany
Phone
Tel: +49 605678441 Fax: +49 605678274

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 5 of 6

© WRAS 2026 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.