Range of shower handsets with either stainless steel or brass bodies (various finishes). Product is supplied with a metal sheathed flexible hose. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2205071

Note:

Open outlet use only

Size:

Flexible hose assembly with a ½” captive nut

Marking:

VOLA T2-XX Brass - Vola on handset body VOLA T2-XX Stainless steel- Vola on end of shower handset

Installation Requirements:

R001 R040

Expiry date:

31/05/2027

Model:

VOLA T2-XX Brass VOLA T2-XX Stainless steel Where XX denotes finish and can be replaced with the following: For Brass: 02=Grey, 04=Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 59=Brushed Natural Brass, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Nickel, B61=Brushed Black, B64=Brushed Copper, B70=Brushed Gold. For Stainless Steel: 40=Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of shower outlets with plastic bodies (various finishes), incorporating EPDM o rings and stainless-steel strainers on the inlets. Models (24130xxx & 24132xxx) are overhead showers and model (24139xx0) is a wall mounted shower outlet. Model 24132xxx incorporates a flow restrictor on the inlet.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2205073

Note:

Open outlet use only.

Size:

½” BSP (F) Sizes added September 2023 ½” BSP (M)

Marking:

Hansgrohe on shower face Markings added September 2023 Hansgrohe on adhesive label on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2027

Model:

24130xxx Hansgrohe Pulsify S Overhead shower 105 1jet 24132xxx Hansgrohe Pulsify S Overhead shower 105 1jet Green Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish Model added September 2023 24 139 xx0 Shower arm 24 139 xx0 is intended to be used in combination with Overhead shower 105 (24130xxx or 24132xxx)

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of shower heads with or without wall connectors (see models) with plastic bodies (various finishes). The shower heads incorporate a stainless-steel strainer and plastic flow regulator on the inlet. Model added September 2023: Wall mounted, brass shower arm (various finishes - see model). Non-metallic materials and components comply with BS6920 at 60°C Models added September 2023 and January 2024: Non-metallic materials and components comply with BS6920 at 65°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2205074

Note:

Open outlet use only. The 24 357 xx0 model is not approved in its own right.

Size:

24 140 xxx: ½” BSP (F). 24 150 xxx: N/A (can only be used with compatible Hansgrohe products). Model added September 2023: 24 357 xx0: ½” BSP (M) Models added November 2023: 24 141 xxx: ½” BSP (F). 24 151 xxx: N/A (can only be used with compatible Hansgrohe products). Model added January 2023: 24 149 xx0 ½” BSP (M).

Marking:

Hansgrohe on shower face

Installation Requirements:

R001 R040

Expiry date:

31/05/2027

Model:

24 140 xxx Hansgrohe Pulsify S Overhead shower 260 1jet 24 150 xxx Hansgrohe Pulsify S Overhead shower 260 2jet with wall connector Model added September 2023: 24 357 xx0 Hansgrohe Shower arm S 39 cm (which must be installed in conjunction with the 24 140 xxx model or 24 141 xx0 model added November 2023) Models added November 2023: 24 141 xx0 Hansgrohe Pulsify S Overhead shower 260 1jet EcoSmart 24 151 xx0 Hansgrohe Pulsify S Overhead shower 260 2jet EcoSmart with wall connector Model added January 2023: 24 149 xx0 Hansgrohe Pulsify Wall connector for overhead shower 260 (which must be used with a Hansgrohe Overhead shower). Where xxx or xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of overhead shower outlets with brass and plastic bodies, various finishes (see models). The inlets incorporate stainless-steel filters and plastic flow regulators. Maximum operating temperature 60°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2205075

Size:

½” BSP male

Marking:

Hansgrohe of rim of shower head

Installation Requirements:

R001 R040

Expiry date:

31/05/2027

Model:

27 461 XXX 27 463 XXX 27 464 XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of shower handsets with ABS bodies (various finishes). Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2205312

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

E-Tec on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2027

Model:

Single function models: 10410 – (white) 10210 – (white) Three function models: 10213G – (grey) 10213 – (white) 10213MC – (white)

Product Images

Approval Holder:

Xiamen E-Tec Electric Shower CO.LTD

Company Name

Xiamen E-Tec Electric Shower CO.LTD

Address

NO.11 Hailing East Road Xiamen Area of China (Fuiian) Pilot Free Trade Zone Xiamen Fujuan

Country

China,

View All Listings by this Company