Rubbers

Section Code 5365 : Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

Back To Directory Sections

#2405504

'EPDM HT5697-4A'. Black coloured, injection moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. Between May 2024 and October 2024, the material was for use with water up to 50°C. Between November 2024 and May 2029, the material is for use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2405504
Expiry date:
31/05/2029
Approval Holder:
Terramix SA/Hultec
Company Name
Terramix SA/Hultec
Address
De Empaques Santa Ana 150 M Este Y 125 M Sur Pozos De Santa Ana
Country
San Jose, Costa Rica
Phone
Tel: +506 2829900 Fax: +506 2822514

View All Listings by this Company

Print This Approval

#2311556

'ML 57302'. Black coloured, compression moulded EPDM material. Shore hardness 55A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311556
Expiry date:
30/11/2028
Approval Holder:
SumiRiko AVS Germany GmbH
Company Name
SumiRiko AVS Germany GmbH
Address
Karl Winnacker Strasse 22a, D-39396 Steinau an der Strasse
Country
Germany

View All Listings by this Company

Print This Approval

#240755001

'EP02971PWRC'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755001
Expiry date:
31/07/2029
Approval Holder:
Chang Horing Rubber Co., Ltd.
Company Name
Chang Horing Rubber Co., Ltd.
Address
No 38 Lu-Gong South 3 Road, Lu-Kang Town, Changhua Hsien
Country
Taiwan
Phone
+886 4 7810868

View All Listings by this Company

Print This Approval

#2312536

'SME001 EPDM'. Black coloured, compression moulded EPDM material. Shore hardness 60. In November 2024 'SME001 EPDM', a compression moulded EPDM rubber with a shore hardness of 75 was added to the approval so that a range with a hardness between 60 & 75 is covered by the approval. Tested in-radius size of 1.0mm and are for use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2312536
Expiry date:
31/12/2028
Approval Holder:
SRI RAMKARTHIC POLYMERS PVT LTD
Company Name
SRI RAMKARTHIC POLYMERS PVT LTD
Address
D.NO 2/1 - 1&2 SF NO 237/1B&2A Thudiyalur Road, Kottaipalayam, Coimbatore, TA 641110
Country
India

View All Listings by this Company

Print This Approval

#240550005

'E59WKZ'. Black coloured, injection moulded EPDM rubber material. Shore hardness 58. Tested in-radius 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240550005
Expiry date:
31/05/2029
Approval Holder:
Duram Industries A.C. Ltd.
Company Name
Duram Industries A.C. Ltd.
Address
Kibbuts Ramat, Hakovesh, 44930
Country
Israel

View All Listings by this Company

Print This Approval

#240155010

'HT5557-10'. Black coloured, injection moulded EPDM material. Shore hardness 55. Tested in-radius size 1.0mm. Between January 2024 and March 2024, the material was for use with water up to 50°C. From April 2024 the material is for use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240155010
Expiry date:
31/01/2029
Approval Holder:
Terramix SA/Hultec
Company Name
Terramix SA/Hultec
Address
De Empaques Santa Ana 150 M Este Y 125 M Sur Pozos De Santa Ana
Country
San Jose, Costa Rica
Phone
Tel: +506 2829900 Fax: +506 2822514

View All Listings by this Company

Print This Approval

#2106561

'EP210107'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106561
Expiry date:
30/06/2026
Approval Holder:
Klamflex Pipe Couplings (Pty) Limited
Company Name
Klamflex Pipe Couplings (Pty) Limited

View All Listings by this Company

Print This Approval

#240255027

'EPDM-A-001'. Black coloured, compression moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.1mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240255027
Expiry date:
28/02/2029
Approval Holder:
Dalian Rainbow Foundry Co., Ltd.
Company Name
Dalian Rainbow Foundry Co., Ltd.
Address
Hebin North Road #51, Deng Sha He Town, JinZhou District, Dalian
Country
China

View All Listings by this Company

Print This Approval

#240255040

'3E60B11P/3E60B18P & 3E70B03P/3E70B16P'. Black coloured, compression moulded EPDM materials. Shore hardness 60 & 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240255040
Expiry date:
28/02/2029
Approval Holder:
Tosin Industrial Corporation
Company Name
Tosin Industrial Corporation
Address
No 116-2 & 117, Lane 460, Nan Shin 2nd See., Chung Feng Road, Pingzhen Bist, Taoyuan City 32472
Country
Taiwan

View All Listings by this Company

Print This Approval

#240355009

'EW gasket material'. Black coloured, injection moulded, EPDM gasket material. Shore hardness 65A. Tested in-radius size 3.9mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240355009
Expiry date:
31/03/2029
Approval Holder:
Victaulic Europe BVBA
Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36 Nazareth
Postcode
B-9810
Country
Belgium
General Email
ed.mccarson@victaulic.com

View All Listings by this Company

Print This Approval

#241255001

'E6029 (shore hardness 70) & E6392 (shore hardness 80)'. Black coloured, compression moulded EPDM rubber materials. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241255001
Expiry date:
31/12/2029
Approval Holder:
DLR Elastomer Engineering Ltd.
Company Name
DLR Elastomer Engineering Ltd.
Address
Unit 1A & B, Leyland Business Park, Centurion Way, Farington, Leyland
Postcode
PR25 3GR

View All Listings by this Company

Print This Approval

#2311570

'EPDM-LJHY'. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311570
Expiry date:
30/11/2028
Approval Holder:
Anhui Lujiang Huayi Rubber Products Co. Ltd.
Company Name
Anhui Lujiang Huayi Rubber Products Co. Ltd.
Address
Quanshui Industrial Zone, Baihu Town, Lujiang County, Hefei City, Anhui
Country
China

View All Listings by this Company

Print This Approval

#240355019

'ECW-70'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 0.5mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240355019
Expiry date:
31/03/2029
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2311571

'Jihua 3517'. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311571
Expiry date:
30/11/2028
Approval Holder:
Jihua Rubber Industrial Co., Ltd.
Company Name
Jihua Rubber Industrial Co., Ltd.
Address
Jihua Polymer Material High-tech Industrial Park, The Yangtze River Road, Yueyang Area, (Hunan) Pilot Free Trade Zone
Country
China

View All Listings by this Company

Print This Approval

#241055001

'EP05280PWRC'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055001
Expiry date:
31/10/2029
Approval Holder:
Chang Horing Rubber Co., Ltd.
Company Name
Chang Horing Rubber Co., Ltd.
Address
No 38 Lu-Gong South 3 Road, Lu-Kang Town, Changhua Hsien
Country
Taiwan
Phone
+886 4 7810868

View All Listings by this Company

Print This Approval

#240755003

'EH700-144'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755003
Expiry date:
31/07/2029
Approval Holder:
Chi-Yih Enterprise Co., Ltd.
Company Name
Chi-Yih Enterprise Co., Ltd.
Address
No 93, Lane 245, Section 3 Sha-Tien Road Ta-Tu 432 Taichung
Country
Taiwan
Phone
+88 6426 996 802
General Email
eric@chiyih.com

View All Listings by this Company

Print This Approval

#240355027

'EUW-75'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 0.5mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240355027
Expiry date:
31/03/2029
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2311572

'EPDM-LJHY'. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311572
Expiry date:
30/11/2028
Approval Holder:
Saint-Gobain PAM(Jiangsu) Pipelines Technology Co., Ltd.
Company Name
Saint-Gobain PAM(Jiangsu) Pipelines Technology Co., Ltd.
Address
Building No.5, Zi Yun Wisdom Plaza, No. 19 Kazimen Avenue, Qinhuai District, Nanjing
Country
China

View All Listings by this Company

Print This Approval

#240755004

'EP7041F'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755004
Expiry date:
31/07/2029
Approval Holder:
Xiamen HongYangXin Rubber Tech Co., Ltd.
Company Name
Xiamen HongYangXin Rubber Tech Co., Ltd.
Address
866 Xiafang, Jishan Village, Xingtai Development Zone, Changtai District, Zhangzhou City, Fujian Province
Country
China

View All Listings by this Company

Print This Approval

#241055002

'EP801324C'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055002
Expiry date:
31/10/2029
Approval Holder:
Fannteer Corporation
Company Name
Fannteer Corporation
Address
2F, No. 77, Zhouzi Street, Neihu District, Taipei City 114680
Country
Taiwan
Phone
+886 2 2577 4691
General Email
info@fannteer.com.tw

View All Listings by this Company

Print This Approval

#240255055

'C12251'. Black coloured, compression moulded EPDM material. Shore hardness 77. Tested in-radius size 10.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240255055
Expiry date:
28/02/2029
Approval Holder:
KSB SAS
Company Name
KSB SAS
Address
Zone Industriale de Gagnaire Fonseche, 24490 LA ROCHE CHALAIS
Country
France
Phone
(+33) 553 92 44 00

View All Listings by this Company

Print This Approval

#2210563

'CH EP 160 DM'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210563
Expiry date:
31/10/2027
Approval Holder:
DIS MRP Seals (p) Ltd.
Company Name
DIS MRP Seals (p) Ltd.
Address
DP4, Sidco Industrial Estate, Arakkonam, Ranipet Dist, Tamil Nadu, 631 005
Country
India

View All Listings by this Company

Print This Approval

#240755005

'EP02971PWRC'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755005
Expiry date:
31/07/2029
Approval Holder:
Yaw-Yew Rubber Co. Ltd.
Company Name
Yaw-Yew Rubber Co. Ltd.
Address
No. 49-38, Fanshe St. Fuxing Township, Changhua County
Country
Taiwan
Phone
+886-4-7783390

View All Listings by this Company

Print This Approval

#240355050

'EPDM BW 5950 J 70'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 2.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240355050
Expiry date:
31/03/2029
Approval Holder:
Prabhat Elastomers Pvt. Ltd.
Company Name
Prabhat Elastomers Pvt. Ltd.
Address
'Prabhat Bhavan', 96 L.B.S. Marg, Vikhroli West, Mumbai, Maharashtra 400083
Country
India
Phone
+91 22 3294 6102
General Email
prabhatin@vsnl.com

View All Listings by this Company

Print This Approval

#240555028

'KX-1'. Black coloured, compression moulded, EPDM rubber sheet material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240555028
Expiry date:
31/05/2029
Approval Holder:
Suzhou Kangxi Rubber Plastic Co. Ltd.
Company Name
Suzhou Kangxi Rubber Plastic Co. Ltd.
Address
No. 159 Dongqiao Renmin Road, Huang dai Town, Suzhou City, Jiangsu Province
Country
China

View All Listings by this Company

Print This Approval

#2302568

Initial approval was for ‘SMS-80’ (shore hardness 80) only. In April 2024 ‘SMS-50' (shore hardness 50) & ‘SMS-70’(shore hardness 70) were added to the approval. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 80. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2302568
Expiry date:
29/02/2028
Approval Holder:
SAMSUN MAKINA SANAYI A.S.
Company Name
SAMSUN MAKINA SANAYI A.S.
Address
ORGANIZE SANAYI BOLGESI, YASAR DOGU CADDESI, N0:41 55300, KUTLUKENT, SAMSUN
Country
Turkey
Phone
+90 362 266 51 60
General Email
info@samsunmakina.com.tr

View All Listings by this Company

Print This Approval

#240455051

'AquaFlex T 5858'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240455051
Expiry date:
30/04/2029
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#240555033

'EPDM70-BH'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240555033
Expiry date:
31/05/2029
Approval Holder:
Anhui Binghui Technology Co., Ltd.
Company Name
Anhui Binghui Technology Co., Ltd.
Address
No. 3399, Qifeng Road, Shizishan High-tech Industrial Development Zone, Tongguan District, Tongling City, Anhui Province
Country
China

View All Listings by this Company

Print This Approval

#240555034

'DQ-EPDM75'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.1mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240555034
Expiry date:
31/05/2029
Approval Holder:
Ningbo Daqi Sealing Technology Co., Ltd.
Company Name
Ningbo Daqi Sealing Technology Co., Ltd.
Address
No. 398 Yiheng Road, Industrial Zone, Changhe Town, Cixi City, Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval

#240555037

'HT5557-20'. Black coloured, injection moulded EPDM material. Shore hardness 55. Tested in-radius size 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240555037
Expiry date:
31/05/2029
Approval Holder:
Hultec / Terramix S.A
Company Name
Hultec / Terramix S.A
Address
PO Box 84140-1000, San José
Country
Costa Rica

View All Listings by this Company

Print This Approval

#240555043

'EP8008'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240555043
Expiry date:
31/05/2029
Approval Holder:
Xiamen Haiyixin Rubber Seal Products Co., Ltd.
Company Name
Xiamen Haiyixin Rubber Seal Products Co., Ltd.
Address
Haicang Distr., Xiamen, Fujian, CN-361027
Country
China

View All Listings by this Company

Print This Approval

#240555046

'LX-EP701P'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240555046
Expiry date:
31/05/2029
Approval Holder:
Anhui Lixin Rubber Technology Co., Ltd.
Company Name
Anhui Lixin Rubber Technology Co., Ltd.
Address
6 Xinqing Road, Industrial Zone, Xuanzhou District, Xuancheng City, Anhui Provice, 242000
Country
China

View All Listings by this Company

Print This Approval

#240755010

'EZ Valve EPDM'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755010
Expiry date:
31/07/2029
Approval Holder:
Henkel Corporation
Company Name
Henkel Corporation
Address
One Henkel Way, Rocky Hill, 06067
Country
United States

View All Listings by this Company

Print This Approval

#240655006

'AEC 2/EPDM-50, AEC 3/EPDM-60, AEC 4/EPDM-70 & AEC.A5/EPDM-80'. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 80. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240655006
Expiry date:
30/06/2029
Approval Holder:
Allianz Elastomer
Company Name
Allianz Elastomer
Address
Opp.-Samarpan Lamination, Rajpar Road AT-Sakatsanla, Morbi 363641 Gujarat
Country
India

View All Listings by this Company

Print This Approval

#240755011

'SE-718PF'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755011
Expiry date:
31/07/2029
Approval Holder:
Hun-Yi Rubber Industrial Co., Ltd.
Company Name
Hun-Yi Rubber Industrial Co., Ltd.
Address
No. 40, Lane 193, Hochen Road, Homei Town, Changhua County, Taiwan
Country
China

View All Listings by this Company

Print This Approval

#240655015

'AquaFlex T 5821'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240655015
Expiry date:
30/06/2029
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#240555055

'EDXX 74'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.5mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240555055
Expiry date:
31/05/2029
Approval Holder:
Sattec DBS Gomma S.r.l
Company Name
Sattec DBS Gomma S.r.l
Address
Via E. Mattei, 12, 33080 Prata di Pordenone - PN
Country
Italy
Phone
+39-0434 620100
General Email
commerciale@sattecgomma.it

View All Listings by this Company

Print This Approval

#240755014

'70EP505P'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755014
Expiry date:
31/07/2029
Approval Holder:
Xiamen Baode Tech Rubber Co. Ltd.
Company Name
Xiamen Baode Tech Rubber Co. Ltd.
Address
5th Floor, No. 40, Huli Park, Tong'an Industrial Concentration Zone, Xiamen City, Fujian Province
Country
China

View All Listings by this Company

Print This Approval

#2212574

‘EPDM EV2’. Black coloured, injection moulded EPDM materials. Shore hardness 75A. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2212574
Expiry date:
31/12/2027
Approval Holder:
Victaulic Europe BVBA
Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36 Nazareth
Postcode
B-9810
Country
Belgium
General Email
ed.mccarson@victaulic.com

View All Listings by this Company

Print This Approval

#240455062

‘ML57308’ Black coloured, compression moulded EPDM rubber material. Shore hardness 75A. Tested in-radius size 1.0mm. Between April 2025 and April 2025, the material is for use with water up to 23°C. Between May 2025 and April 2029, the material is for use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240455062
Expiry date:
30/04/2029
Approval Holder:
SumiRiko AVS Germany GmbH
Company Name
SumiRiko AVS Germany GmbH
Address
Karl Winnacker Strasse 22a, D-39396 Steinau an der Strasse
Country
Germany

View All Listings by this Company

Print This Approval

#240655052

'OLDAL 460'. Black coloured, injection moulded EPDM material. Shore hardness 50. Tested in-radius size 1.2mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240655052
Expiry date:
30/06/2029
Approval Holder:
Oldrati Guarnizioni Industriali Spa
Company Name
Oldrati Guarnizioni Industriali Spa
Address
Via Quarenghi 2, 24060 Villongo (Bergamo)
Country
Italy
Phone
+39 035 939213 Fax: +39 035 939613

View All Listings by this Company

Print This Approval

#240755015

'E7083AA'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755015
Expiry date:
31/07/2029
Approval Holder:
Ge Mao Rubber Industrial Co. Ltd.
Company Name
Ge Mao Rubber Industrial Co. Ltd.
Address
No15, Kung-Yeh East 4th Road, Lu-Kang, Chang Hua, Taiwan
Country
China
Phone
+886 4781 0288 Fax: +886 4781 0289

View All Listings by this Company

Print This Approval

#241055005

'E8083AA'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055005
Expiry date:
31/10/2029
Approval Holder:
Ge Mao Rubber Industrial Co. Ltd.
Company Name
Ge Mao Rubber Industrial Co. Ltd.
Address
No15, Kung-Yeh East 4th Road, Lu-Kang, Chang Hua, Taiwan
Country
China
Phone
+886 4781 0288 Fax: +886 4781 0289

View All Listings by this Company

Print This Approval

#240755016

'CH EP 172 DM'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755016
Expiry date:
31/07/2029
Approval Holder:
DIS MRP Seals (p) Ltd.
Company Name
DIS MRP Seals (p) Ltd.
Address
DP4, Sidco Industrial Estate, Arakkonam, Ranipet Dist, Tamil Nadu, 631 005
Country
India

View All Listings by this Company

Print This Approval

#241055006

'SE-808PF'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055006
Expiry date:
31/10/2029
Approval Holder:
Hun-Yi Rubber Industrial Co., Ltd.
Company Name
Hun-Yi Rubber Industrial Co., Ltd.
Address
No. 40, Lane 193, Hochen Road, Homei Town, Changhua County, Taiwan
Country
China

View All Listings by this Company

Print This Approval

#240755028

'EP7037K'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755028
Expiry date:
31/07/2029
Approval Holder:
Progum Elastomer Technology Co., Ltd.
Company Name
Progum Elastomer Technology Co., Ltd.
Address
5F-9, No 258 Liancheng Road, Jhonghe District, New Taipei City 23553
Country
Taiwan

View All Listings by this Company

Print This Approval

#240655064

'Pango2023'. Black coloured, compression moulded EPDM material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240655064
Expiry date:
30/06/2029
Approval Holder:
Pango Pump and Valve Manufacturing (Shandong) Co. Ltd.
Company Name
Pango Pump and Valve Manufacturing (Shandong) Co. Ltd.
Address
Workshop No.7 West Zone, Pump and Valve Technology Industrial Park, Beixinzhuang Village, Xinxing Town, Lanling County, Linyi City
Country
China

View All Listings by this Company

Print This Approval

#240655067

'TRA-7073'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240655067
Expiry date:
30/06/2029
Approval Holder:
Talbros Sealing Material Pvt. Ltd.
Company Name
Talbros Sealing Material Pvt. Ltd.
Address
Plot No. 60, Sec-6, Faridabad Haryana, Pin Code 121006
Country
India

View All Listings by this Company

Print This Approval

#240855017

'EPDM70(E7-512K)'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240855017
Expiry date:
31/08/2029
Approval Holder:
Air Water Mach Rubber Products (Fujian) CO., LTD.
Company Name
Air Water Mach Rubber Products (Fujian) CO., LTD.
Address
Rongqiao Economy and Technology Development Zone, Fuqing City, Fujian Province
Country
China

View All Listings by this Company

Print This Approval

#240855034

'LCKB70'. Black coloured, compression moulded EPDM material. Shore hardness 70A. Tested in-radius size 1.3mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240855034
Expiry date:
31/08/2029
Approval Holder:
Comet Srl
Company Name
Comet Srl
Address
Via Fogliano, Trav I, 12, 25030 Coccaglio (BS)
Country
Italy
Phone
+39 035 933535
General Email
comet@cometsre.com

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 4 of 6

© WRAS 2026 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.