Section Code 5260 : Components.
Back To Directory Sections'Wasserfluss Clamp Saddle'. Blue coloured, injection moulded polypropylene saddle fitting. For use with water up to 23°C.
'Cosmoplast PP-R Pipe'. Green coloured, extruded PP-R pipe. For use with water up to 85°C.
'Vissen'. Black coloured, injection moulded polypropylene compression fitting. For use with water up to 23°C.
'Spectrum Carbon Block End Caps'. White coloured, extruded polypropylene end caps. For use with water up to 23°C.
'BORplus Faser Composite Stabil PP-RCT Pipe'. Extruded, multi-layered PP-RCT pipe comprising of a grey coloured inner layer, black coloured middle layer and grey coloured outer layer. For use with water up to 85°C.
'5308400500 polypropylene liner tube', taupe coloured, injection moulded polypropylene liner. In March 2025, '5308400500 polypropylene liner tube', natural (appears beige), injection moulded polypropylene liner was added to the approval. For use with water up to 23°C.
'Plas-fit PN 16 Compression Fittings Series 250/ 350'. Black coloured, injection moulded polypropylene fittings. For use with water up to 23°C.
‘Coprax® PP-R Pipe’. Blue coloured (with green stripe), extruded PP-R pipe. For use with water up to 85°C.
‘Coprax® PP-R Fitting’. Blue coloured, injection moulded PP-R fitting. For use with water up to 85°C.
'DESO PPR01'. Green coloured (with red external stripe), extruded polypropylene pipe. For use with water up to 85°C.
'Eurotherm PPR Fitting'. Green coloured, injection moulded PPR fitting. For use with water up to 85°C.
'Eurotherm PPR Pipe'. Green coloured (with yellow coloured stripe), extruded PPR pipe. For use with water up to 85°C.
'Unidelta Compression Fitting'. Black coloured, injection moulded polypropylene compression fittings. For use with water up to 60°C.
'ATLAS & FLOWTECH PP-RCT PIPE'. Green coloured, extruded PP-RCT pipe. For use with water up to 85°C.
'ATLAS & FLOWTECH PP-RCT Fitting'. Green coloured, injection moulded PP-RCT fittings. For use with water up to 85°C.
'Presto Integrated Clamp Saddle - Saddle' & 'Presto Integrated Clamp Saddle - Elbow'. Blue coloured, injection moulded polypropylene saddle component and black coloured, injection moulded polypropylene elbow component. For use with water up to 23°C.
'Magnum Monoblock Hotneck - Top Cap' and 'Magnum Monoblock Hotneck - Saddle'. Black coloured, injection moulded, polypropylene 'top-cap' and 'saddle' components. For use with water up to 23°C.
‘ECOTEC tubsed® TS.50/TS.85'. Black coloured, extruded polypropylene water channel component. Shore hardness 74. For use with water up to 23°C.
'40-5048'. White coloured (translucent), injection moulded, polypropylene 'Filter Frame' component. For use with water up to 45°C.
'Novatherm Faser Composite Pipe’. Extruded, multi-layered pipe comprising of a green coloured, PP-R inner and outer layer and green coloured, glass fibre reinforced PP-R middle layer. For use with water up to 65°C.
'ISOMAG Cylinder'. Grey coloured, extruded polypropylene cylinder component. For use with water up to 60°C.
'Cosmoplast PPR Glass Fibre Reinforced Pipe'. Extruded, triple layered pipe consisting of a green coloured, polypropylene inner layer, grey coloured, glass fibre middle layer and a green coloured, polypropylene outer layer. For use with water up to 85°C.
'VIALLI-De SDR 6 & SDR 7.4 PPR pipes'. Green coloured, extruded PPR pipes. For use with water up to 85°C.
'VIALLI-De PPR SDR 6 Pipe with Aluminum Middle Layer'. Extruded PPR pipe with a green coloured inner and outer layer and aluminium middle layer. For use with water up to 85°C.
'VIALLI-De PPR SDR 6 & SDR 7.4 Pipes with Glass Fibre Middle Layer'. Extruded PPR pipes with a green coloured inner and outer layer and a red coloured, glass fibre middle layer. For use with water up to 23°C.
'Roxy PP-R pipe'. Green coloured, extruded PP-R pipe. For use with water up to 70°C.
'UPMC PPR Pipe'. Green coloured (with yellow stripe), extruded PPR pipe. For use with water up to 85°C.
'Techno PP-RCT Pipe'. Green coloured (with yellow stripe), extruded PP-RCT pipe. For use with water up to 85°C.
'Techno PP-RCT Fitting'. Green coloured, injection moulded PP-RCT fitting. For use with water up to 23°C.
'Techno UV Black Fitting'. Black coloured, injection moulded PPR fitting. For use with water up to 85°C.
'Techno UV Black Pipe'. Black coloured (with yellow stripe), extruded PPR pipe. For use with water up to 85°C.
'Almona PP-RCT 5 layered pipe' & 'Almona PP-RCT 3 layered pipe'. Extruded, multi-layered PP-RCT pipes. Both pipes have a green inner layer, grey second layer and green third layer. The 5-layer pipes then have an additional grey fourth layer and black outer layer. For use with water up to 85°C.
'Apitherm PP-RCT Class 2 & Class 5 Pipes'. Green coloured (the Class 5 pipes have a red stripe), extruded PP-RCT pipes. For use with water up to 85°C.
'Apitherm PP-RCT Class 2 & Class 5 Fittings'. Green coloured, injection moulded PP-RCT fittings. For use with water up to 85°C.
'AquaTerra SDR 6 PP-R Pipes'. Green coloured, extruded PP-R pipes. 'AquaTerra SDR 7.4 PP-R Pipes', green coloured, extruded PP-R pipes were added to the approval in September 2024. All pipes are or use with water up to 85°C.
'AquaTerra PP-R Fitting'. Green coloured, injection moulded PP-R fitting. For use with water up to 85°C.
'+GF+ Hakan Aquasystem'. White or green coloured, injection moulded PPR fittings. For use with water up to 85°C.
'+GF+ Hakan Aquasystem Faser Composite Stabil Pipe'. Multi-layered, extruded PPR pipe consisting of a white coloured inner, green coloured middle and white coloured outer layer. The following multi-layered, extruded PPR pipes were added to the approval in April 2025: Green coloured inner, green coloured middle and green coloured outer layer. Beige coloured inner, green coloured middle and beige coloured outer layer. Grey coloured inner, green coloured middle and grey coloured outer layer. For use with water up to 85°C.
‘Formül, Aquapa, Aquaplast, Foraqua & Aquapipe Green PP-R Pipe'. Green coloured, extruded PP-R pipes. For use with water up to 85°C.
‘Formül, Aquapa, Aquaplast, Foraqua & Aquapipe Green PP-R Fittings'. Green coloured, injection moulded PP-R fittings. For use with water up to 85°C.
'KALSON PP Saddle Fittings'. Blue coloured, injection moulded polypropylene saddle fittings. For use with water up to 65°C.
'+GF+ Hakan Aquasystem'. Extruded, PPRC pipes available in green, white or beige colours. For use with water up to 85°C.
'ERA PP Compression Fitting'. Black coloured, injection moulded polypropylene compression fitting. For use with water up to 23°C.
'Fasotherm'. Green coloured, extruded PP-R pipe. For use with water up to 23°C.
'Ashirvad PP Compression fitting body'. Black coloured, injection moulded PP fitting body. For use with water up to 23°C.
'CPLAST PPR Pipes'. Green coloured, extruded PPR pipes. For use with water up to 85°C.
'Cosmoplast Polypropylene Fittings'. Green coloured, injection moulded polypropylene fittings. For use with water up to 85°C.
'DANCO AQUAFLO'. Green coloured (with red stripes), extruded polypropylene pipe. For use with water up to 85°C.
'Kaizen Fitting'. Black coloured, injection moulded, polypropylene compression fitting body. For use with water up to 23°C.
'S-Ion PPR Pipe'. Green coloured (with blue stripes), extruded PPR pipe. For use with water up to 85°C.
Page 4 of 5
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
