Rubbers

Section Code 5365 : Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

Back To Directory Sections

#250655040

'AP-EPDM 50A, AP-EPDM 60A, AP-EPDM 70A & AP-EPDM 80A'. Black coloured, compression moulded EPDM materials. Shore hardness between 50A & 80A. Tested in-radius size between 1.15mm & 1.21mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250655040
Expiry date:
30/06/2030
Approval Holder:
AGAM Polymers Private Limited
Company Name
AGAM Polymers Private Limited
Address
30/37 A, West Patel Nagar, New Delhi -110008
Country
India

View All Listings by this Company

Print This Approval

#2307545

'EP 70110 HC'. Black coloured, compression moulded EPDM rubber. Shore hardness 70. Tested in-radius size 1.56mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307545
Expiry date:
31/07/2028
Approval Holder:
Zenith Industrial Rubber Products Pvt. Ltd.
Company Name
Zenith Industrial Rubber Products Pvt. Ltd.
Address
141/144, 14th Floor, Free Press House, Free Press Journal Marg, 215 Nariman Point, Mumbai - 400 021
Country
India

View All Listings by this Company

Print This Approval

#250755046

'51M5536'. Black coloured, injection moulded EPDM material. Shore hardness 55 ShA. Tested in-radius size 0.5mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250755046
Expiry date:
31/07/2030
Approval Holder:
WOCO GmbH & Co. KG
Company Name
WOCO GmbH & Co. KG
Address
Hanauer Landstraße 16, D 63628 Bad Soden - Salmünster
Country
Germany
Phone
Tel: +49 605678441 Fax: +49 605678274

View All Listings by this Company

Print This Approval

#250855020

'EXJ2024'. Black coloured, compression moulded EPDM material. Shore hardness 65. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250855020
Expiry date:
31/08/2030
Approval Holder:
ALLTO Pipeline Equipment Co., Ltd.
Company Name
ALLTO Pipeline Equipment Co., Ltd.
Address
200m North of Yongtong Avenue, Xicun, Xicun Town, Gongyi, Zhengzhou, Henan
Country
China

View All Listings by this Company

Print This Approval

#250755055

'HT5697-50'. Black coloured, injection moulded EPDM material. Shore hardness 67 ShA. Tested in-radius size 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250755055
Expiry date:
31/07/2030
Approval Holder:
Hultec / Terramix S.A
Company Name
Hultec / Terramix S.A
Address
PO Box 84140-1000, San José
Country
Costa Rica

View All Listings by this Company

Print This Approval

#251155012

'DLYY E6202'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.1mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
251155012
Expiry date:
30/11/2030
Approval Holder:
Dalian Yingyu Co., Ltd.
Company Name
Dalian Yingyu Co., Ltd.
Address
No.692, ZhongShan Road, ShaHeKou District, Dalian
Country
China

View All Listings by this Company

Print This Approval

#250955014

'WE-HR-01'. Black coloured, compression moulded EPDM rubber material. Shore hardness 75. Tested in-radius size 0.99mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250955014
Expiry date:
30/09/2030
Approval Holder:
Tianjin Hongrui Rubber Co., Ltd.
Company Name
Tianjin Hongrui Rubber Co., Ltd.
Address
Beizhakou Electronical Industrial Area, Jinnan, Tianjin, 300350
Country
China
General Email
rubber@tj-hongrui.com

View All Listings by this Company

Print This Approval

#250855032

'Dutral K-Co-054'. Black coloured, compression moulded EPDM materials. Shore hardness between 52A & 80A. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250855032
Expiry date:
31/08/2030
Approval Holder:
Pulsar Rubber MGF. CO. Pvt. Ltd.
Company Name
Pulsar Rubber MGF. CO. Pvt. Ltd.
Address
P.O. -Ganganagar, 24 Parganas (North), Kolkata,, West Bengal 700132
Country
India

View All Listings by this Company

Print This Approval

#251055013

'EP500'. Black coloured, injection moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
251055013
Expiry date:
31/10/2030
Approval Holder:
Guarnimed Srl Unipersonale
Company Name
Guarnimed Srl Unipersonale
Address
Via Rossini 17/19, 24060 Credaro BG
Country
Italy
Phone
+39 03509 51111
General Email
info@guarnimed.it

View All Listings by this Company

Print This Approval

#2307546

'SM177'. Black coloured, compression moulded EPDM rubber. Shore hardness 70. Tested in-radius size 1.56mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307546
Expiry date:
31/07/2028
Approval Holder:
Accrasystem Ltd. T/A Metroseal
Company Name
Accrasystem Ltd. T/A Metroseal
Address
Unit 28-30 Purdeys Way, Rochford, Essex
Postcode
SS4 1ND

View All Listings by this Company

Print This Approval

#2301544

'EPDM E282'. Black coloured, compression moulded EPDM sheet material. Shore hardness 80A. Tested in-radius size 1.0 For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2301544
Expiry date:
31/01/2028
Approval Holder:
Commercial Hot Water Solutions
Company Name
Commercial Hot Water Solutions
Address
Units 71/72 Gazelle Road, Weston Industrial Estate, Weston Super Mare
Postcode
BS24 9ES

View All Listings by this Company

Print This Approval

#251055020

'E7581'. Black coloured, injection moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
251055020
Expiry date:
31/10/2030
Approval Holder:
Trelleborg Sealing Solutions Germany GmbH.
Company Name
Trelleborg Sealing Solutions Germany GmbH.
Address
Schockenriedstrasse 1, 70565 Stuttgart
Country
Germany

View All Listings by this Company

Print This Approval

#250955051

'ECL/EP/50 & ECL/EP/80'. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250955051
Expiry date:
30/09/2030
Approval Holder:
Electrosteel Castings Ltd.
Company Name
Electrosteel Castings Ltd.
Address
Punganur Works, Aradigunda Village, Chittoor, Punganur(M), Andhra Pradesh, 517247
Country
India

View All Listings by this Company

Print This Approval

#251055023

'E7131'. Black coloured, injection moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
251055023
Expiry date:
31/10/2030
Approval Holder:
Ulman Dichtungstechnik GmbH
Company Name
Ulman Dichtungstechnik GmbH
Address
Max-Planck-Strasse 32, 71116 Gaertringen
Country
Germany

View All Listings by this Company

Print This Approval

#251055029

'7571E'. Black coloured, injection moulded EPDM material. Shore hardness 55. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
251055029
Expiry date:
31/10/2030
Approval Holder:
Trelleborg Pipe Seals
Company Name
Trelleborg Pipe Seals
Address
Pascallaan 80, 8218NJ Lelystad
Country
Netherlands

View All Listings by this Company

Print This Approval

#251055030

'JHSX-02'. Black coloured, compression moulded EPDM rubber material. Shore hardness 50. Tested in-radius size 1.05mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
251055030
Expiry date:
31/10/2030
Approval Holder:
Yingkou Jiahua Plastic New Tech. Co. Ltd.
Company Name
Yingkou Jiahua Plastic New Tech. Co. Ltd.
Address
Ba Yu Quan, Yingkou City, Liaoning Province
Country
China

View All Listings by this Company

Print This Approval

#251055034

'XX-01'. Black coloured, compression moulded EPDM rubber material. Shore hardness 50. Tested in-radius size 1.05mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
251055034
Expiry date:
31/10/2030
Approval Holder:
Liaoning Honghai Xinxin Sealing Technology Co., Ltd.
Company Name
Liaoning Honghai Xinxin Sealing Technology Co., Ltd.
Address
01 Plastic Industrial Park, Lutun Town, Bayuquan District, Yingkou City, Liaoning Province
Country
China

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 14 of 14

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.