Section Code 5240 : Components. All components listed in this section have been tested for water contact suitability of material only.
Back To Directory Sections'+GF+ HAKAN PE-RT EVOH Pipe'. Extruded pipe with a white coloured (opaque) PE-RT inner layer and an orange coloured EVOH outer layer. For use with water up to 85°C.
`Water Line`. Black coloured (with external blue stripes), extruded polyethylene pipe. For use with water up to 23°C.
'AO Roto Water Tank Panel'. White coloured, LLDPE tank panel manufactured by rotational moulding. For use with water up to 60°C.
'PlastFast/Plast Electrofusion Fittings'. Black coloured, injection moulded HDPE electrofusion fittings. For use with water up to 85°C.
'Uponor Combi Pipe'. Multi-layered, extruded PEX pipe comprising of an uncoloured (translucent) inner layer, uncoloured EVOH middle layer and white coloured outer layer. For use with water up to 85°C.
'Como-Flex'. Black coloured and blue coloured, extruded polyethylene pipes. For use with water up to 23°C.
'Aion MDPE Pipe'. Blue coloured, extruded MDPE pipe. For use with water up to 65°C.
'Aion HDPE Pipe'. Black coloured (with blue stripe), extruded HDPE pipe. For use with water up to 65°C.
`HYDROFAS'. Black coloured, extruded polyethylene (PE 80) pipe. For use with water up to 23°C.
'Retiflex PE-Xb'. Translucent, white coloured, extruded, single-layered PE-Xb tubing. ‘RETIFLEX PEXb black’ was added to the approval in October 2024. Black coloured, extruded, single-layered PE-Xb tubing. Both tubes are for use with water up to 85°C.
'LIC PEX-b'. White (translucent), extruded PEX-b pipe. For use with water up to 85°C.
'Green Pipes HDPE Pipes'. Black coloured (with blue external stripe), extruded HDPE pipe. For use with water up to 65°C.
'Green Pipes HDPE Fittings'. Black coloured (with blue external stripe), fabricated butt-fusion HDPE fittings. For use with water up to 65°C.
'PF Press'. Triple layered, extruded pipe comprising of a white coloured (translucent) inner layer, aluminium middle layer and white coloured (opaque) outer layer. For use with water up to 85°C.
'XD PE Fitting'. Black coloured, injection moulded polyethylene fitting. For use with water up to 60°C.
'NEWPRO HDPE Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 65°C.
`Peak Pipe Systems PE100 Pipe`. Dual layered, co-extruded polyethylene pipes consisting of a black coloured inner and blue coloured outer layer. For use with water up to 23°C.
'Pextec Plus Silver'. Triple layered, extruded pipe consisting of a black coloured PE-Xc inner layer, an aluminium middle layer and a silver/grey coloured PE-Xc outer layer. For use with water up to 70°C.
'Pextec Plus White'. Triple layered, extruded pipe consisting of a black coloured PE-Xc inner layer, an aluminium middle layer and a white coloured PE-Xc outer layer. For use with water up to 70°C.
'MT PE-Xc/AL/PE-X Pipe' (formerly known as 'Hewing MT PE-Xc/AL/PE-X multi layer pipe'). Extruded, multi-layered pipes comprising of an off-white (translucent), PEX-Xc inner layer, aluminium middle layer and white coloured (opaque), PE-Xb outer layer. For use with water up to 85°C. Please note that the pipes will be marked with 'WRAS 2111538'. Pipes which do not have this marking are not covered by the scope of the approval.
'Instantor® Pex'. Translucent, white coloured, extruded, single-layered PE-Xb tubing. For use with water up to 85°C.
'Lasertec PE-RT/Al Multi-layered Pipe'. Extruded PE-RT pipe comprising of a black coloured inner, aluminium barrier layer and silver-grey coloured outer layer. For use with water up to 70°C.
'DBS0420-DBS0640'. Orange coloured HDPE ball float, manufactured by blow moulding. For use with water up to 23°C.
'CPI Electrofusion fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 65°C.
'CPI HDPE Pipes'. Black coloured (with blue external stripes), extruded HDPE pipes. For use with water up to 65°C.
'NAFF ZPE PE40 LDPE'. Black coloured (with blue external stripes), extruded LDPE pipe. For use with water up to 23°C.
'CORREX®, Q-GUARD® & S-PATRON® PE-Xc Anode Frame (Clip)'. Cream coloured, injection moulded PE-Xc clip components. For use with water up to 85°C.
'CORREX®, Q-GUARD®, S-PATRON® & HYTONIC® PE-Xc Anode Gasket'. Cream coloured, injection moulded PE-Xc gaskets. For use with water up to 85°C.
'002DP48 Aiva Electrofusion Fittings'. Blue coloured, injection moulded HDPE electrofusion fittings. For use with water up to 23°C.
'Kott-Glide 2.0'. Black coloured, extruded HDPE pipe. For use with water up to 85°C.
‘Kingbull PE100 blue pipe (391721)'. Blue coloured, extruded polyethylene pipe. ‘Kingbull PE100 black pipe’ (0103102). Black coloured (with external blue stripe), extruded polyethylene pipe. Both for use with water up to 65°C.
'EGPI HDPE BL-W Pipe'. Black coloured, (with blue coloured external stripe), extruded HDPE pipe. For use with water up to 85°C.
'C40'. White coloured, extruded polyethylene pipe. For use with water up to 85°C.
'K9'. White coloured, extruded polyethylene pipe. For use with water up to 85°C.
'Polygon Polyethylene Pipe'. Black coloured or blue coloured, single layered, extruded polyethylene pipe. For use with water up to 23°C.
'LSPE-BE001 PE Pipe (Blue)'. Blue coloured, extruded polyethylene pipe. For use with water up to 60°C.
'Georg Fischer HDPE PE100 Black Machined Fabricated Fittings and Segmented Fabricated Fittings'. Black coloured, HDPE PE100, machined fabricated fittings. Black coloured, with or without blue stripe, extruded and fabricated, HDPE PE100 fabricated segmented fittings. For use with water up to 60°C.
'EB AQUAFLEX Cable'. Blue coloured, extruded polyethylene electrical cable. For use with water up to 23°C. Please note that, due to the way this cable was tested, this approval is valid only when the outer sheath is the layer in contact with water.
‘Kingbull PE100 blue pipe (391721)'. Blue coloured, extruded polyethylene pipe. ‘Kingbull PE100 black pipe’ (0103102). Black coloured (with external blue stripe), extruded polyethylene pipe. Both for use with water up to 65°C.
'HDPE 100 Black POLIMAXX P901BK'. Black coloured, extruded HDPE pipe. For use with water up to 65°C.
'HDPE 100 Blue POLIMAXX P901BL'. Blue coloured, extruded HDPE pipe. For use with water up to 65°C.
'Protecta-line Pipes PE80 & PE100 Pipes'. Extruded, multi-layered pipes comprising of a black coloured PE80 or PE100 inner layer, aluminium middle layer and blue coloured PE80 or PE100 outer layer. The pipes have a black external stripe. For use with water up to 23°C.
'Polygon Polyethylene Fittings'. Black coloured, injection moulded PE fittings. For use with water up to 23°C.
'Vialli PEXa Pipe'. White coloured (translucent), extruded PEXa pipe. For use with water up to 85°C.
‘PE-Xc PENTA Pipe’ (formerly known as 'Hewing PE-Xc PENTA Pipe (off-white or beige)'. The extruded pipes have either an off-white (natural) OR a beige coloured, polyethylene inner and outer layer. The middle layer is EVOH (oxygen barrier). Both for use with water up to 85°C.
'PRESTO electrofusion fitting'. Black coloured, injection moulded, polyethylene electrofusion fitting. For use with water up to 23°C.
'Radius Systems Puriton Light Blue Barrier Pipe [Type A, BS8588]' (formerly known as 'Radius Systems Puriton II LB Pipe' until March 2025). Extruded, triple layered pipe consisting of a black coloured polyethylene inner layer, aluminium middle layer and blue coloured polyethylene outer layer. For use with water up to 23°C.
'IRRIPLASTEC PE 100 WATER'. Dual layered, extruded pipe comprising of a white coloured (opaque), PE inner layer and a black coloured, PE outer layer. For use with water up to 23°C.
'004DP44 Aiva Composite Saddle'. Blue coloured, injection moulded HDPE fitting. For use with water up to 23°C.
'PRESTO electrofusion tapping saddles'. Blue coloured, injection moulded polyethylene electrofusion tapping saddles. For use with water up to 23°C.
Page 2 of 9
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
