Water Coolers

Section Code 2420 : Drinking.

Back To Directory Sections

#2311056

Range of undercounter water chillers with a stainless-steel cooling tank including a drain outlet. Maximum working pressure 3.0 Bar. Maximum operating temperature 38°C.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
2311056
Size:
¼” NFTF (M).
Marking:
HYCO logo on outer casing. Hyco logo, voltage, batch number and other technical information on adhesive label on outer casing.
Installation Requirements:
R001 R150 R170 R511
Expiry date:
30/11/2028
Proviso:
Discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Model:
SAPUC1, SAPUC2.
Product Images

Approval Holder:
Hyco Manufacturing Ltd.
Company Name
Hyco Manufacturing Ltd.
Address
Unit 1 & 2 Normandy Court, Express Way, West Yorkshire
Postcode
WF10 5NR
Phone
01924 225 200

View All Listings by this Company

Print This Approval


#240202711

‘G5 C’ command centre providing chilled (filtered) water via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The products are supplied with a filter cartridge. The inlet to the command centre incorporates two approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum inlet supply pressure 5.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
240202711
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and HydroTap logo on body.
Installation Requirements:
R001 R009 R040 R150 R170
Expiry date:
28/02/2029
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Command Centre UK HydroTap Mains models: H50011000UK - G5 C100 M.
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Country
United Kingdom
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Print This Approval


#240202712

‘G5 CS’ command centre providing chilled or chilled sparkling water (both filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The product incorporates a pressure reducing valve (adjustable outlet pressure between 2.25 and 2.75 bar) on the supply to the carbonator unit. The carbonator inlet incorporates a non-return valve. The product is supplied with a filter cartridge. The inlet to the command centre incorporates two approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum inlet supply pressure 5.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
240202712
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and HydroTap logo on body.
Installation Requirements:
R001 R009 R040 R160 R170 R415
Expiry date:
28/02/2029
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Command Centre UK HydroTap Mains model: H50065000UK - G5 CS100 M.

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Country
United Kingdom
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Print This Approval


#241002715

Oasis Kalix range of water dispensers which dispenses hot and cold water. The flow is controlled via a solenoid valve and the products are activated via a push button or infrared sensor. The products incorporate a pressure relief valve with a plastic body which is rated at 5.0 bar. Maximum working pressure 3.0 bar Please refer to model for maximum operating temperature.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
241002715
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
6mm push-fit
Marking:
Oasis logo on front panel. Oasis, model & technical information on data plate on rear.
Installation Requirements:
R001 R008 R150 R170
Expiry date:
31/10/2029
Model:
Oasis Kalix range Maximum operating temperature 40°C: P1PVKY P1PVCDKY P1PVHSY P1PCDHSY Maximum operating temperature 85°C: P1PVHSKY P1PVCDHSKY P1CPVKY P1CPVCDKY P1CPVHSY P1CPVCDHSY P1CPVHSKY P1CPVCDHSKY P1TMPVHSKY
Product Images

Manufacturer:
OASIS East Sp z o o
Company Name
OASIS East Sp z o o
Address
ul. Gutenberga 20, 44-164 Gliwice, Poland

View All Listings by this Company

Print This Approval


#250102705

Water chiller and heater units for under counter installation incorporating an approved double check valve at the inlet, to be used in conjunction with an outlet tap arrangement or flow control device, with a range of taps that are supplied with the chillers. Maximum working pressure 10.0 Bar Maximum operating temperature 98.0°C

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
250102705
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Billi on tap body. Billi, Model number, Model name and other technical information on adhesive labels on unit body.
Installation Requirements:
R001 R006
Expiry date:
31/01/2030
Model:
Alpine Family, Cold and Ambient Water units 932060, 932120, 932125, 913000 Quadra Family 904010, 904020, 904025, 904040, 904060, 904065, 904100, 904105, 904107, 904180, 904187 X-series taps (XL- levered dispenser, XT -touch dispenser, XR-remote dispenser) XL ( 852150), XT ( 852153), XR (852156) Mixer Taps 991200, 991300, 991400, 991500, 991600, 991700, 991900
Product Images

Manufacturer:
Billi Australia Proprietary Ltd
Company Name
Billi Australia Proprietary Ltd
Address
42 Lucknow Crescent, Thomastown, Victoria 3074
Country
Australia

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.