Range of monochloramine generators incorporating UPVC pipework, fittings and an external flow sensor. Maximum working pressure 6.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

250302705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP F

Marking:

Sanikill Tec on adhesive label on body

Installation Requirements:

R001 R008 R415 R575

Expiry date:

31/03/2030

Model:

ESKUT-LT1002 SANIKILL Tec 500 g. ESKUT-LT2004 SANIKILL Tec 1 kg.

Approval Holder:

Sanipur S.p.A.

Company Name

Sanipur S.p.A.

Address

Via S. Quasimodo,25 25020 Flero (BS)

Country

Italy

General Email

b.fermi@sanipur.it

View All Listings by this Company

Range of chemical dosing equipment which incorporate self-closing valves and plastic bodies. The outlet of the injector incorporates a connection for injection of chemicals via venturi action and the inlets include stainless-steel strainers. Maximum operating pressure 9 bar. Maximum operating temperature 70°C.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

251004710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Only suitable for use with chemicals no greater than a FC3, additional backflow protection is required for chemicals greater than FC3. Must be installed in the vertical plane.

Size:

¾” BSP male inlet

Marking:

SEKO, max pressure, max temperature and other technical info on label.

Installation Requirements:

R001 R040 R160

Expiry date:

31/10/2030

Model:

PXB1F04 PROMAX BUTTON FLEX-GAP 4L/MINPRODUCT PXB1F16 PROMAX BUTTON FLEX-GAP 14L/MINPRODUCT PXB1F30 PROMAX BUTTON FLEX-GAP 30L/MINPRODUCT PXB4F04 PROMAX BUTTON FLEX-GAP 4L/MINPRODUCT PXB4F16 PROMAX BUTTON FLEX-GAP 14L/MINPRODUCT PXB4F30 PROMAX BUTTON FLEX-GAP 30L/MINPRODUCT PXS1F04 PROMAX SLIDE FLEX-GAP 4L/MINPRODUCT PXS1F16 PROMAX SLIDE FLEX-GAP 14L/MINPRODUCT PXS1F30 PROMAX SLIDE FLEX-GAP 30L/MINPRODUCT PXS4F04 PROMAX SLIDE FLEX-GAP 4L/MINPRODUCT PXS4F16 PROMAX SLIDE FLEX-GAP 14L/MINPRODUCT PXS4F30 PROMAX SLIDE FLEX-GAP 30L/MINPRODUCT

Approval Holder:

SEKO S.p.a

Company Name

SEKO S.p.a

Address

Viale Luigi Schiavonetti 274 F Roma

Postcode

00173

Country

Italy

General Email

f.pompeo@seko.com

View All Listings by this Company

‘HydroDOS’ chlorine dioxide dosing system with PVC-u pipework, water meter, strainer, isolation valves and a drain cock with hose spigot. Maximum working pressure 6.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

251202715

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

20mm PVC solvent weld connection

Marking:

HydroDOS, model, WRAS and technical data on adhesive label on body.

Installation Requirements:

R001 R120 R160 R170 R415 R511 R575

Expiry date:

31/12/2030

Model:

HydroDOS HD550G Chlorine dioxide generator (215 g/hr max). HydroDOS HD600G Chlorine dioxide generator (600 g/hr max).

Approval Holder:

Hydrotec International Water Treatment Limited

Company Name

Hydrotec International Water Treatment Limited

Address

38 Main Street Swords Country Dublin

Country

Ireland

View All Listings by this Company