'JSAW– JAL (OPC-TICL)'. Factory applied, grey coloured Ordinary Portland Cement. Mix sand, cement & water in a 1.5:1.0:0.5 weight ratio and apply as per manufacturer's instructions 'JSL/QA/PR-06', version '2.0', dated '15.02.20'. Cure for 27 days@21°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250155032

Expiry date:

31/01/2030

Approval Holder:

Jindal Saw Limited

Company Name

Jindal Saw Limited

Address

B-13 MIDC Tembhurni, Taluka- Madha, District –Solapur, Maharashtra, 413211

View All Listings by this Company

'JSAW-JAL (SRPC-DCL)'. Factory applied, grey coloured Sulphate resistant Portland Cement. Mix sand, cement & water in a 1.5:1.0:0.5 weight ratio and apply as per manufacturer's instructions 'JSL/QA/PR-06', version '2.0', dated '15.02.20'. Cure for 27 days@21°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250155033

Expiry date:

31/01/2030

Approval Holder:

Jindal Saw Limited

Company Name

Jindal Saw Limited

Address

B-13 MIDC Tembhurni, Taluka- Madha, District –Solapur, Maharashtra, 413211

View All Listings by this Company

'JSAW-JAL (BFSC-JSL)'. Factory applied, grey coloured Blast furnace slag cement. Mix sand, cement & water in a 1.5:1.0:0.5 weight ratio and apply as per manufacturer's instructions 'JSL/QA/PR-06', version '2.0', dated '15.02.20' and apply as per. Cure for 27 days@21°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250155034

Expiry date:

31/01/2030

Approval Holder:

Jindal Saw Limited

Company Name

Jindal Saw Limited

Address

B-13 MIDC Tembhurni, Taluka- Madha, District –Solapur, Maharashtra, 413211

View All Listings by this Company

'JSAW- DI- BLACK BITUMEN PAINT'. Factory applied, black coloured bitumen coating. Apply as per manufacturer's Technical Data Sheet 'JSL/IMS/PR/35', revision '02', dated '12.04.2025'. Cure for 7 days@30°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

260255022

Expiry date:

28/02/2031

Approval Holder:

Jindal Saw Limited

Company Name

Jindal Saw Limited

Address

B-13 MIDC Tembhurni, Taluka- Madha, District –Solapur, Maharashtra, 413211

View All Listings by this Company