Range of wall mounted, thermostatic blending valves incorporating ceramic disc diverter cartridges. Inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to verify backflow protection. Product also had manual override button, with variations of dome and single lever operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2211381

Note:

Does not include hose and handset.

Size:

3/4” BSP (F) captive nuts. Supplied with ½” x ¾” BSP (M) offset unions.

Marking:

BAGNODESIGN valve body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2027

Model:

BDM-MLP-T101-EXP-XX

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of floor standing, single hole, single outlet (fixed) combination tap assemblies (stainless steel bodies – various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

251108001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” NPT (F).

Marking:

BAGNODESIGN on body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2030

Model:

BDM-STU-306-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (stainless steel bodies – various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

251108002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel PEX lined flexible hose assemblies with ½” BSP captive nut end connection.

Marking:

BAGNODESIGN on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2030

Model:

BDM-STU-301S-XX, BDM-STU-302S-XX. XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of wall mounted, stainless steel spout outlets (various finishes) incorporating a plastic aerator. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

251108003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

BAGNODESIGN on back plate.

Installation Requirements:

R001 R040

Expiry date:

30/11/2030

Model:

BDM-STU-407-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of wall mounted, manually operated, concealed blending shower valves (stainless steel bodies – various finishes) incorporating a ceramic cartridge headwork, with single lever operating member and 2 or 3-way diverter, controlling the flow and temperature. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

2001 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control , incorporating a manual diverter between outlets.

WRAS Approval Number:

251108004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” NPT (F).

Marking:

BAGNODESIGN on faceplate ring.

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2030

Model:

BDM-STU-411-XX Studio 316 wall mounted concealed shower mixer with two-way diverter. BDM-STU-412-XX Studio 316 wall mounted concealed shower mixer with three-way diverter. XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

General Email

dan@sanipexgroup.com

View All Listings by this Company