Xiamen R&T Plumbing Technology Co.,Ltd Approvals


#1904016

‘A2423’ range of WC dual flush drop valves with plastic bodies and silicone seals. The valves are operated via a two push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
1904016
Expiry date:
30/04/2024
Size:
2” BSP (M)
Marking:
R&T and A2423 on top of body. Date of manufacture (clock format) on base of valve.
Installation Requirements:
R001 R571
Model:
A2423L, A2423M & A2423H.
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen

View All Listings by this Company

Print This Approval


#2111046

Dual flush WC outlet valve with an ABS body, incorporating a silicone seal & internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2111046
Expiry date:
30/11/2026
Marking:
RT and A2420 (model) moulded into body.
Installation Requirements:
R001 R571
Model:
A2420
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen

View All Listings by this Company

Print This Approval


#2211007

Dual flush drop valve with ABS body and silicone seal. The valve is operated via a lever assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2211007
Expiry date:
30/11/2027
Size:
2” BSP (M)
Marking:
R&T on body.
Installation Requirements:
R001 R571 R581
Model:
A2432
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen

View All Listings by this Company

Print This Approval


#2212314

Side entry BS1212-4 (2016) compact type float operated valves for WC flushing cisterns. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2212314
Expiry date:
31/12/2027
Size:
½” BSP (M).
Marking:
R&T, model code & BS1212-4, on body.
Installation Requirements:
R001 R550
Model:
A1423A – Straight, A1423A – Bend.
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen

View All Listings by this Company

Print This Approval


#2212343

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212343
Expiry date:
31/12/2027
Size:
½” BSP (M).
Marking:
R&T on adhesive label on body. R&T, model number moulded on fixed plate. 6L waterline printed within cistern.
Installation Requirements:
R001 R556
Model:
G3004, G3005, G3008.
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen

View All Listings by this Company

Print This Approval


#2212315

Concealed WC dual flushing cistern with a side entry BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure – 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212315
Expiry date:
31/12/2027
Size:
½” BSP (M).
Marking:
R&T, model code printed on fixed plate. 6L waterline printed within cistern.
Installation Requirements:
R001 R556 R571 R581
Model:
G3003.
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen

View All Listings by this Company

Print This Approval


#2303359

WC flushing cistern incorporating a side entry BS 1212-4 compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2303359
Expiry date:
31/03/2028
Size:
½” BSP (M)
Marking:
R&T on moulded on fixed plate. Model number on adhesive label on front of lid. 6L waterline printed within cistern
Installation Requirements:
R001 R556 R581
Model:
G3005C
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
Houxiang Road 18, Haicang Xinyang Industrial Zone, Xiamen

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.