Solar twin coil range of stainless steel indirect hot water storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar and 90˚C. A safety kit (manifold) consisting of a check valve, strainer, an expansion relief valve set at 6.0 bar and pressure reducing valve set at 3.0 bar. A tundish, expansion vessel and a drain valve also comes supplied.
Maximum operating pressure secondary circuit 5.5 bar.
Maximum operating pressure primary circuit 3.0 bar.
Maximum operating pressure solar circuit 5.5 bar.
Maximum operating temperature 65˚C
- Section:
- 1890 Unvented Heating Apparatus
- WRAS Approval Number:
- 1907057
- Expiry date:
- 31/07/2024
- Size:
- 25 litre, 90 litre, 150 litre, 170 litre, 200 litre, 250 litre, 300 litre
- Marking:
- Telford, model, pressure, capacity and technical info on adhesive label on body
- Installation Requirements:
- R001 R140 R530 R360
- Proviso:
- WRAS Approval - Solar heating system components. “Compliance with the relevant requirements of the Water Supply (Water Fittings) Regulations 1999 has been assessed for this product only as a component of a heating system. If it is to be installed a s part of a system using solar energy or ground - or air - source heat pumps for pre-heating water which is to be used as domestic hot water, the Water Fittings Regulation place a legal duty on the installer and user to ensure that the installation and operation of the complete system prevents contamination of domestic hot water by Legionella bacteria, which can grow in water stored at temperatures between 20OC and 45 OC. Where disinfection by heating is relied on to meet this obligation, information on minimum conditions for thermal disinfection of legionella bacteria can be found on the WRAS website - www.wras.co.uk
- Model:
-
ornado Direct 3.0 90 litre
Tornado Direct 3.0 125 litre
Tornado Direct 3.0 150 litre
Tornado Direct 3.0 170 litre
Tornado Direct 3.0 200 litre
Tornado Direct 3.0 250 litre
Tornado Direct 3.0 300 litre
Tornado Indirect 3.0 90 litre
Tornado Indirect 3.0 90 litre
Tornado Indirect 3.0 125 litre
Tornado Indirect 3.0 150 litre
Tornado Indirect 3.0 170 litre
Tornado Indirect 3.0 200 litre
Tornado Indirect 3.0 250 litre
Tornado Indirect 3.0 300 litre
Tornado twin coil 3.0 170 litre
Tornado twin coil 3.0 200 litre
Tornado twin coil 3.0 250 litre
Tornado twin coil 3.0 300 litre
- Factor:
- Telford Copper and Stainless Ltd.
Company Name
Telford Copper and Stainless Ltd.
Address
Furrows Business Park
Haybridge Road
Wellington
Postcode
TF1 2DF
View All Listings by this Company - Manufacturer:
- Telford Copper & Stainless Cylinders Ltd
Company Name
Telford Copper & Stainless Cylinders Ltd
Address
Unit 22
Furrows Business Park
Haybridge Road
Postcode
TF1 2DF
View All Listings by this Company