Range of floor standing, single hole, single outlet (fixed) combination tap assemblies (brass body in various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a manually operated ceramic disc diverter to shower outlet with dome type (JD-5027** model) or single lever (JD-5030** model) operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed, thermostatic blending valve with a brass body, (various finishes - see model), incorporating a ¼ turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge. The JD-ATS401** model has single lever operating members, the JD-ATS411** model has cube operating members. The thermostatic valve operating member incorporates a manual override button. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of deck mounted, four hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to the shower handset. The spout outlet is the blade type. The product is supplied with a shower hose and handset and plastic backnuts. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C
Range of wall mounted two-hole, single outlet (fixed) bath shower mixers (brass bodies in various finishes), incorporating a two-way manual diverter controlling and diverting the flow between the spout outlet and an overhead shower. Temperature is controlled independently via a thermostatic cartridge. The outlet to the shower hose incorporates a ceramic disc manual diverter (operated by turning the spout through 90°) to divert the flow between the spout and shower outlet. The JD- ETS413** model has dome type operating members, the ETS423** model has cube operating members. The thermostatic valve operating member incorporates a manual override button. The spout outlets incorporate a plastic aerator and the products are supplied with a shower riser, overhead shower, shower hose and shower handset. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, manual blending shower valves (brass bodies in various finishes - see model), incorporating a ceramic cartridge with a single lever operating member controlling both temperature and flow, and a manual diverter controlling the flow between the shower hose and handset and an overhead shower. The product is supplied with a shower riser, overhead shower, shower hose and shower handset. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet (swivel) combination tap assembly (brass body in various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member and a pull-out spray outlet with an interlocked stainless steel hose incorporating an EPDM liner. The pull-out spray handset incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of five hole, metal, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with cube type operating members. The products have a manually operated diverter to shower outlet and are supplied with a shower hose and handset. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (swivel) combination tap assemblies incorporating brass bodies (various finishes) and quarter turn ceramic disc headwork with dome type operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, manual blending bath shower mixers (brass bodies in various finishes) incorporating a ceramic cartridge headwork with a single lever operating member controlling both temperature and flow and a self-cancelling diverter (to divert the flow between a shower outlet or bath spout outlet - not supplied). Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.
Range of five hole, metal, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with cross top operating members and a manually operated diverter to the shower. The spout outlets incorporate a plastic aerator and the products are supplied with shower hose and handset. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (brass body with various finishes) incorporating quarter turn ceramic disc headworks with cube type operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of two hole, single outlet (fixed) combination tap assemblies (brass bodies in various finishes - see model), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with metal backnuts. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of three-hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes brass) incorporating quarter turn ceramic disc headwork with cross top operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Deck mounted, two hole, single outlet (fixed) combination tap assembly (brass body - various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. The product has metal backnuts. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C
Range of wall mounted, concealed, thermostatic shower blending valves (brass bodies with trim sets in various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow to an overhead outlet. The product also incorporates a 2 way manual ceramic disc diverter headwork, controlling and diverting the flow between two bottom shower outlets. Temperature is controlled independently via a thermostatic cartridge. The JD-ATS311** model has single lever operating members, the JD-ATS312** model has cube operating members. The thermostatic valve operating member incorporates a manual override button. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted concealed four-hole, single outlet (fixed) combination tap assemblies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and self-cancelling diverter to shower outlet. The spout outlet which is connected via a wall mounted inlet joint which incorporates a plastic aerator. The product is supplied with a wall mounted shower outlet elbow and handset holder, shower hose and handset. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Wall mounted, concealed, three hole, single outlet (fixed) thermostatic blending valve with a brass body, (various finishes). Flow is controlled by a manual diverter valve, diverting the flow between the shower outlet or bath outlet. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The product is supplied with cube type operating members. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is also supplied with a spout outlet which includes a plastic aerator. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.
Range of wall mounted, concealed, thermostatic shower blending valves (brass bodies with trim sets in various finishes). The product does not include any flow controls it is only a manual diverter valve, diverting the flow between the shower hose and handset and the overhead shower outlet. Temperature is controlled independently via a thermostatic cartridge. The JD-A511** model has single lever operating members, the JD-A817** model has cube operating members. The thermostatic valve operating member incorporates a manual override button. The product is supplied with a shower arm and overhead shower, wall elbow, shower hose and shower handset. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed, thermostatic blending shower valves incorporating a ½ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The LH3500-6 model has cube type operating members, the LH5427 model has dome type operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Single hole, single outlet (swivel) combination tap assembly (brass body in various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member and a pull-out spray outlet with a stainless-steel interlocked EPDM lined flexible hose. The pull-out spray handset incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of three-hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporates a plastic aerator. The product is supplied with stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections to be used as connecting hoses between side bodies and spout. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Range of wall mounted two hole, single outlet (fixed) thermostatic bath / shower mixing tap (in various finishes). Incorporating half turn /ceramic disc headworks, dome type operating members and manual diverter to shower outlet. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. The both inlets incorporate a single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and a stainless steel strainer. Maximum working pressure 8 bar. Maximum operating temperature 60°C.
Wall mounted, concealed, thermostatic blending valves with a brass body, (various finishes - see model). Flow is controlled by a manual diverter valve, diverting the flow between two shower outlets. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The JD-ATS221** model has dome type operating members, the JD-ATS222** model has cube type operating members. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product incorporates 90 elbow and holder for a shower hose and handset (not supplied). Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.
Page of 1
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.