Fluidmaster Turkey Approvals


#2105012

Range of WC dual flush drop valve with plastic body silicone rubber seal and NBR rubber ‘O’-ring. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2105012
Expiry date:
31/05/2026
Size:
2” BSP (M)
Marking:
Fluidmaster on body. 800 series on platform under operating member.
Installation Requirements:
R001 R571
Model:
820WB-FIF-002. 820WB-FIF-003. 820WB-FIF-004. 820F-001. 820F-013. 30082. 25-5151. 25-5151-01. 25-5278. 25-5293
Manufacturer:
Fluidmaster Turkey
Company Name
Fluidmaster Turkey
Address
Key Teknik Yapi Malzemeleri San Ve Tic AS

View All Listings by this Company

Print This Approval


#2109022

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109022
Expiry date:
30/09/2026
Size:
15mm Compression Model added April 2022: ½” BSP (M)
Marking:
Fluidmaster, model and flushing volumes inside of cistern. Olympia on operating buttons. Model added April 2022: Fluidmaster, model and flushing volumes inside of cistern.
Installation Requirements:
R001 R556
Model:
T02-0100WRAS1, T02-0100WRAS2 & T02-0100WRAS3. Model added April 2022: T02-0800WRAS3
Factor:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano CA 92675
Phone
00949 728 2000
General Email
dmarbry@Fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster Turkey
Company Name
Fluidmaster Turkey
Address
Key Teknik Yapi Malzemeleri San Ve Tic AS
General Email

View All Listings by this Company

Print This Approval


#2106003

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106003
Expiry date:
30/06/2026
Size:
1/2” BSP (M).
Marking:
Fluidmaster and model number inside cistern.
Installation Requirements:
R001 R556
Model:
T06-0800WRAS2 3-4.5 Ltr. T06-0800WRAS1 3-4.5 Ltr. T06-0100WRAS1 3-6Ltr. T06-0100WRAS2 3-6Ltr.
Factor:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano CA 92675
Phone
00949 728 2000
General Email
dmarbry@Fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster Turkey
Company Name
Fluidmaster Turkey
Address
Key Teknik Yapi Malzemeleri San Ve Tic AS
General Email

View All Listings by this Company

Print This Approval


#2309005

Dual flush WC drop valve with an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2309005
Expiry date:
30/09/2028
Size:
2” BSP (M)
Marking:
Fluidmaster and WRAS on body
Installation Requirements:
R001 R571 R580 R581
Model:
821WB-FEP
Factor:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano CA 92675
Phone
00949 728 2000
General Email
dmarbry@Fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster Turkey
Company Name
Fluidmaster Turkey
Address
Key Teknik Yapi Malzemeleri San Ve Tic AS
General Email

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.