Range of two-hole, wall mounted, single outlet (fixed) combination tap assemblies brass bodies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed.

WRAS Approval Number:

1906304

Expiry date:

30/06/2024

Size:

½” BSP (F)

Marking:

Bagno Design on cartridge faceplate

Installation Requirements:

R001 R010 R040

Model:

Princess Nouveau: BDM-PRI-112019-A-CP (chrome plated), BDM-PRI-122019-A-NB (nickel Brushed), BDM-PRI-122019-A-BZ(bronze), BDM-PRI-122019-A-CR (brushed copper), BDM-PRI-122019-A-G (gold).

Factor:

BAGNODESIGN

Company Name

BAGNODESIGN

Address

UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL

Postcode

WF17 9LU

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1907362

Expiry date:

31/07/2024

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Bagnodesign on base of body

Installation Requirements:

R001 R006 R010

Model:

“Zephyr” Smooth bodied basin mixer: BDM-ZEP-302S-CP (Chrome plated). BDM-ZEP-302S-MB (Matt Black). BDM-ZEP-302S-PG (PVD Gold).

Factor:

BAGNODESIGN

Company Name

BAGNODESIGN

Address

UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL

Postcode

WF17 9LU

View All Listings by this Company

Revolution range of wall mounted two-hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes). Incorporating a ceramic cartridge headworks and single lever operating member. The spout outlet incorporates an aerator. Maximum working pressure 5 bar. Maximum operating temperature 60°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed.

WRAS Approval Number:

1909307

Expiry date:

30/09/2024

Size:

½” BSP(F)

Marking:

Bagnodesign on spout and faceplate of headwork

Installation Requirements:

R001 R010 R040

Model:

BDM-REV-315-CP (chrome plated) BDM-REV-315-NB (Nickel plated) BDM-REV-315-ZB (Zanzibar, brushed brass) BDM-REV-315-MB (Matt black)

Factor:

BAGNODESIGN

Company Name

BAGNODESIGN

Address

UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL

Postcode

WF17 9LU

View All Listings by this Company

Revolution range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator which also incorporates a stainless steel mesh. The BDM-REV-301 models are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1909331

Expiry date:

30/09/2024

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Bagnodesign on body

Installation Requirements:

R001 R006 R009 R010

Model:

Revolution range: BDM-REV-301-CP (Chrome Plated). BDM-REV-301-NB (Nickel Brushed). BDM-REV-301-ZB (Zanzibar(Brushed Brass). BDM-REV-301-MB (Matt Black). BDM-REV-302S-CP (Chrome Plated). BDM-REV-302S-NB (Nickel Brushed). BDM-REV-302S-ZB (Zanzibar(Brushed Brass). BDM-REV-302S-MB (Matt Black).

Factor:

BAGNODESIGN

Company Name

BAGNODESIGN

Address

UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL

Postcode

WF17 9LU

View All Listings by this Company

Zephyr’ range of overhead shower outlets, having brass bodies (with various finishes) and NBR ‘o’ rings. Maximum operating temperature 85°C

Section:

1650 Shower Outlets

WRAS Approval Number:

1909387

Expiry date:

30/09/2024

Note:

Open outlet use only

Size:

½” BSP (F)

Marking:

Bagnodesign on face

Installation Requirements:

R001 R040

Model:

200mmx200mm - BDD-ZEP-510-CP (chrome plated) BDD-ZEP-510-NB (nickel brushed) BDD-ZEP-510-ZB (brushed brass) BDD-ZEP-510-MB (matt black) 300mmx300mm BDD-ZEP-511-CP (chrome plated) BDD-ZEP-511-NB (nickel brushed) BDD-ZEP-511-ZB (brushed brass) BDD-ZEP-511-MB (matt black)

Factor:

BAGNODESIGN

Company Name

BAGNODESIGN

Address

UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL

Postcode

WF17 9LU

View All Listings by this Company