SAN MARCO RUBINETTERIA S.r.l. Approvals


#2309329

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2309329
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections
Marking:
SMR etched on rear of body
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2028
Model:
TM1 SF SWAN TM1 SF QUAD

Approval Holder:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#2309333

Single hole, single outlet, (swivel) combination tap assembly, incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a pull-down hose and a plastic aerator. The inlet hoses incorporate approved check valve cartridges, however, the complete assembly has not been fully tested to it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2309333
Size:
Stainless steel braided EPDM lined, flexible hose with ½” BSP (M) connection.
Marking:
SMR on underside of handle
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2028
Model:
GENIO
Product Images

Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company
Manufacturer:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#2309334

Single hole, single outlet (swivel) combination tap assembly (chrome plated brass body). Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2309334
Size:
Stainless steel braided EPDM lined flexible hose assembly incorporating 15mm compression end connections.
Marking:
SMR on plinth
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2028
Model:
Upton.
Product Images

Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company

Print This Approval


#2309335

Single hole, single outlet (swivel) combination tap assembly (chromIum plated brass bodies) incorporating a ceramic cartridge headwork with single lever type operating member. The spout outlet incorporates an aerator. The cold inlet incorporates an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2309335
Size:
Stainless steel braided or nylon braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections. On hot and ½” BSP male connection on the cold inlet.
Marking:
SMR etched on rear of body
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2028
Model:
LOG L SWIVEL LOG J SWIVEL
Product Images

Approval Holder:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company
Manufacturer:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#2309331

Single-hole, single outlet, (swivel), combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull-out spray type that incorporates a plastic aerator. The inlet of the cold supply hose and the pull-out spray handset both incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2309331
Size:
Cold inlet: Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (M) end connection. Hot inlet: Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connection.
Marking:
SMR on body.
Installation Requirements:
R001 R090
Expiry date:
30/09/2028
Model:
Log L Pull Out
Product Images

Approval Holder:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company
Manufacturer:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#250504009

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating ceramic cartridge or quarter turn ceramic disc headworks with a single lever operating member. The spout outlets incorporate an aerator. Models Prime, Specto and Linear have approved check valve cartridges in the inlets, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250504009
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.
Marking:
LINEAR FLAIR, PRIME Single Lever, SPECTO SINGLE LEVER - Abode, H&C on operating member ATLAS MONOBLOC & ATLAS MONOBLOC QUAD - Abode, H&C on operating member; SMR, ABODE on base of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/05/2030
Model:
ATLAS MONOBLOC ATLAS QUAD MONOBLOC PRIME SINGLE LEVER SPECTO SINGLE LEVER LINEAR FLAIR MONOBLOC
Product Images

Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company
Manufacturer:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#250913001

Single hole, single outlet (swivel) combination tap assembly with brass body (chromium plated), incorporating a ceramic cartridge headworks and single lever operating member. The outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250913001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, EPDM lined flexible hose assemblies with ½” BSP (F) end connections.
Marking:
SMR on rear of tap.
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2030
Model:
MINI HILTON
Product Images

Approval Holder:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company
Manufacturer:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#250913002

Single hole, single outlet (swivel) combination tap assembly with brass body (chromium plated), incorporating a ceramic cartridge headworks and single lever operating member. The outlet incorporates a plastic aerator. One inlet hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250913002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, EPDM lined flexible hose assemblies with ½” BSP (F) end connections.
Marking:
SMR on rear of tap.
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2030
Model:
LOG ECO SWIVEL
Product Images

Approval Holder:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#250913004

Single hole, single outlet (swivel) combination tap assembly with brass body (chromium plated), incorporating a ceramic cartridge headworks and single lever operating member. The outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250913004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, EPDM lined flexible hose assemblies with ½” BSP (F) end connections.
Marking:
SMR on rear of tap.
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2030
Model:
ZENO & ZENO PLUS
Product Images

Approval Holder:
Franke UK Ltd.
Company Name
Franke UK Ltd.
Address
West Park, MIOC, Styal Road, Manchester
Postcode
M22 5WB
Phone
0161 4360280

View All Listings by this Company
Manufacturer:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244

View All Listings by this Company

Print This Approval


#250913005

Single hole, single outlet (swivel) combination tap assembly with brass body (chromium plated), incorporating a ceramic cartridge headworks and single lever operating member. The outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250913005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, EPDM lined flexible hose assemblies with ½” BSP (F) end connections.
Marking:
'Leisure' logo on operating member & SMR on rear of tap.
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2030
Model:
AQUAPACE 35 SINGLE LEVER, AQUAPACE 35 SINGLE LEVER 3L, AQUAPACE 35 SINGLE LEVER 5L & AQUAPACE 35 SINGLE LEVER 6L
Product Images

Approval Holder:
AGA Rangemaster Leisure Limited
Company Name
AGA Rangemaster Leisure Limited
Address
Meadow Lane, Long Eaton, Nottingham
Postcode
NG10 2GD

View All Listings by this Company
Manufacturer:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.