Range of wall mounted hose union taps (brass body or DZR brass body - see model) incorporating a non-rising spindle headwork with a ‘T’-type operating member. Maximum working pressure 14.0 Bar. Maximum operating temperature 85°C.

Section:

1780 Taps

Section Subtitle:

Hose union, metal. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building. Where in existing house installations a hosepipe is to be used from an existing hose union tap located outside a house and which is not provided with backflow protection, either: a. The existing hose union tap should be provided with a double check valve (Type EC or ED) located inside the building; or b. The tap should be replaced with a hose union tap that incorporates a double check valve (type HUK1); or c. A hose union backflow prevention (Type HA) or a double check valve should be continuously fitted to the outlet of the tap; or d. Is legally installed in any premises.

WRAS Approval Number:

2201086

Expiry date:

31/01/2027

Size:

½” BSP (M).

Marking:

MF, Masterflow -A- Logo, size, CR, WRAS, BS1010-2 & BS6282 on body.

Installation Requirements:

R001 R040

Model:

MBHU04 & MBHU04DCV HOSE UNION TAPS

Factor:

Masterflow Products Limited

Company Name

Masterflow Products Limited

Address

70-76 Greatbridge Water Street Manchester Lancashire

Postcode

M1 5ES

View All Listings by this Company