Kingfisher International Products Ltd. Approvals


#250104717

Bottom entry BS1212-4 (2016) compact type float operated valves for use with WC flushing cisterns. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
250104717
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
13½” BSP1/2” (M) Plastic, BSP1/2” (M) Brass 11½” BSP1/2” (M) Plastic, BSP1/2” (M) Brass 10” BSP1/2” (M) Plastic, BSP1/2” (M) Brass
Marking:
Flomasta, BS1212-4 and datum level on body.
Installation Requirements:
R001 R550 R560
Expiry date:
31/01/2030
Model:
50593400659535 & 5059340124025

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#241108017

Range of CU type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
241108017
Size:
see models
Marking:
Flowflex logo, WRAS & size etched on body.
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
5063022703699 PRESS 45DEG STREET ELBOW 15mm 5063022703569 PRESS 45DEG STREET ELBOW 22mm 5063022703705 PRESS 45DEG STREET ELBOW 28mm 5063022703576 PRESS 45DEG ELBOW 15mm 5063022703590 PRESS 45DEG ELBOW 22mm 5063022703682 PRESS 45DEG ELBOW 28mm 5063022703637 PRESS EQUAL ELBOW 15mm 5063022703620 PRESS EQUAL ELBOW 22mm 5063022703750 PRESS EQUAL ELBOW 28mm 5063022703613 PRESS STREET ELBOW 22mm 5063022703743 PRESS STREET ELBOW 28mm 5063022703781 PRESS EQUAL TEE 15mm 5063022703521 PRESS EQUAL TEE 22mm 5063022703767 PRESS EQUAL TEE 28mm 5063022703729 PRESS REDUCED END TEE 5063022703712 PRESS REDUCED BRANCH TEE 5063022703774 PRESS FITTING REDUCER 22 x 15mm 5063022703736 PRESS FITTING REDUCER 28 x 15mm 5063022703545 PRESS FITTING REDUCER 28 x 22mm 5063022703644 PRESS COUPLING 15mm 5063022703675 PRESS COUPLING 22mm 5063022703583 PRESS COUPLING 28mm 5063022703606 PRESS SLIP COUPLER 15mm 5063022703651 PRESS SLIP COUPLER 22mm 5063022703668 PRESS STOP END 15mm 5063022703538 PRESS STOP END 22mm 5063022703552 PRESS STOP END 28mm

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company
Manufacturer:
Flowflex Components Ltd.
Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

Print This Approval


#240704743

Side entry BS1212-4 (2016) compact type float operated valves for use with WC flushing cisterns. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
240704743
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
BSP1/2” (M) Plastic, BSP1/2” (M) Brass,
Marking:
Flomasta, BS1212-4 & datum line on body.
Installation Requirements:
R001 R550 R560
Expiry date:
31/07/2029
Model:
5059340065700,5059340124032

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#250504714

Range of double check valve assemblies, incorporating two spring loaded resilient trim in-line check valve cartridges housed in DZR brass or nickel plated DZR brass bodies. Compression connection to be used with copper pipe EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
250504714
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
KINGFISHER, flow arrow, WRAS, size, CR, date of manufacture (MM-YY) on body. EN1254-2 & size: on compression nut.
Installation Requirements:
R001
Expiry date:
31/05/2030
Model:
Natural colour 5059340261331 - 15mm 5059340245881 - 22mm

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#250504715

Range of counter-top or under-sink electrical water heaters. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C, except 65°C for 10L models.

Section:
1390 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, open outlet.
WRAS Approval Number:
250504715
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2” BSP (M)
Marking:
Flomasta on body & week of manufacture & other tech info on data label.
Installation Requirements:
R001
Expiry date:
31/05/2030
Model:
D10-20VD3 (5063022583697) 10L 2kw VD3 cover D15-20VD3 (5063022583680) 15L 2kw VD3 cover D15-30VD3 (5063022583710) 15L 3kw VD3 cover D30-30VD3 (5063022583703) 30L 3kw VD3 cover

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#250504716

Range of double check valve assemblies, incorporating two spring loaded resilient trim in-line check valve cartridges housed in DZR brass. Compression connection to be used with copper pipe EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
250504716
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
SF logo, brand of KINGFISHER, flow arrow, WRAS, size, CR, date of manufacture (MM-YY) on body. EN1254-2, size: on compression nut.
Installation Requirements:
R001
Expiry date:
31/05/2030
Model:
Natural colour 03890110 - 15mm, 05316861 - 22mm,

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#250504718

Pressure relief valve (pre-set to 6 bar outlet pressure) with a DZR brass body. Maximum working pressure 6.0 bar. Maximum operating temperature 75°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
250504718
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2” BSP (F).
Marking:
Midea, Date of manufacture (YYYY.MM) on body. Flow arrow and CR on body. Pressure rating and product info on operating member.
Installation Requirements:
R001
Expiry date:
31/05/2030
Model:
MOD.171.

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company
Manufacturer:
Wuhu Midea Kitchen and Bathroom Manufacturing Co., Ltd.
Company Name
Wuhu Midea Kitchen and Bathroom Manufacturing Co., Ltd.
Address
East Road Wanchun, East Area Economic & Technological Development Area Wuhu City P.R.
General Email

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 7 of 7

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.