Kingfisher International Products Ltd. Approvals


#2112066

Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
2112066
Expiry date:
31/12/2026
Size:
See Model
Marking:
B&Q (brand of Kingfisher), size and PN10 on body
Installation Requirements:
R001 R511
Model:
EPH_VAL20_0049a Drain-Off Cock - (15mm Capillary), EPH_VAL20_0052a Drain-Off Cock - (1/2” BSP (M)),
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2112067

Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
2112067
Expiry date:
31/12/2026
Size:
See Model
Marking:
SF (Brand of Kingfisher), size and PN10 on body
Installation Requirements:
R001 R511
Model:
EPH_VAL20_0049b Drain-Off Cock - Type A (15mm Capillary), EPH_VAL20_0051 Drain-Off Cock - Type A, (22mm Capillary), EPH_VAL20_0052b Drain-Off Cock - Type A, (1/2” BSP (M)), EPH_VAL20_0054b Drain-Off Cock - Type A (15mm Spigot).
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2112364

Y type fittings incorporating brass body and NBR washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2112364
Expiry date:
31/12/2026
Size:
¾” BSP (F) captive nut x ¾” BSP( M) x 3/4” BSP (M)
Marking:
SF (Brand of Kingfisher) PN10, and size on body.
Installation Requirements:
R001
Model:
EPH_WAS20_0056
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2112365

Range of straight, angled, tee and Y shaped isolation valves incorporating brass bodies, NBR ‘O’-rings or PTFE seats depending on model variant. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2112365
Expiry date:
31/12/2026
Size:
see models
Marking:
B&Q (Brand of Kingfisher), size and PN on body
Installation Requirements:
R001
Model:
15mm x 15mm compression models: EPH_VAL20_0001c 22mm x 22mm compression models: EPH_VAL20_0002b 15mm compression x ¾” BSP (M) models: EPH_WAS20_0024a EPH_WAS20_0027a(angled valve) 15mm compression x ¾” BSP(M) x 15mm compression models: EPH_WAS20_0025a (tee valve)
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2112366

Range of straight, angled, tee and Y shaped isolation valves incorporating brass bodies, NBR ‘O’-rings or PTFE seats depending on model variant. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2112366
Expiry date:
31/12/2026
Size:
see models
Marking:
SF (Brand of Kingfisher), size and PN on body
Installation Requirements:
R001
Model:
¾” BSP (M) x ¾” BSP (F) Captive nut models: EPH_WAS20_0057 (Y shaped valve) 22mm compression x 1 ½” BSP (F) captive nut models: EPH_VAL20_0057b EPH_VAL20_0060
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2204093

‘KSO’ range of compression fittings with brass or chrome plated brass bodies for use with copper pipe (manufactured to EN1057). The KSO14 sand KSO15 tap connector models incorporate an EPDM washer. Maximum working pressure 16.0 bar. Maximum working temperature 85˚C

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2204093
Expiry date:
30/04/2027
Size:
see model
Marking:
Flomasta (Brand of Kingfisher) and Size on fitting body EN1254-2 and Size on end nut
Installation Requirements:
R001
Model:
KSO01 couplings-cxc 6mm-54mm KSO15 couplings-cxc: 6 - 54mm compression. KSO01B repair couplings-cxc: 6 - 54mm compression. KSO01R reducing couplings cxc: 10 x 8mm compression, 12 x 8mm compression, 15 x 8mm compression, 12 x 10mm compression, 15 x 10mm compression, 15 x 12mm compression, 18 x 12mm compression, 16 x 15mm compression, 22 x 15mm compression, 28 x 15mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression. KSO02P female adaptors-parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ⅜" BSP (F), 10mm compression, x ½" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x ¾” BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). KSO03T male adaptors-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). KSO03P male adaptors-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). KSO03P extended male adaptors-CxMI: 10mm compression, x ⅜" BSP (M), 12mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M). KSO04 tank connectors-lug style: 10 - 54mm compression. KSO04N tank connectors-nut style: 10 - 54mm compression. KSO05 elbows 90 degree-CxC: 6 - 54mm compression. 8 x 6mm compression, 10 x 8mm compression, 12 x 10mm compression, 15 x 12mm compression, 18 x 15mm compression, 22 x 15mm compression, 22 x 18mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression, KSO06T male elbows-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1¼" BSP (M), 42mm compression, x 1½" BSP (M), 54mm compression, x 2" BSP (M). KSO06 male elbows-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 28mm compression, x 1-¼" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). KSO07 female elbows-CxFI parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 8mm compression, x ⅜" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ½" BSP (F), 10mm compression, x ⅜" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x ¾" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x 1-¼" BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). KSO08 wallplate elbows-CxFI: 12mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x ½" BSP (F), 28mm compression, x 1" BSP (F). KSO08 equal tees-CxCxC: 6 - 54mm compression. KSO08R reducing tees-CxCxC: 15 x 15 x 10mm compression, 15 x 15 x 22mm compression, 22 x 15 x 15mm compression, 22 x 15 x 22mm compression, 22 x 22 x 15mm compression, 22 x 22 x 28mm compression, 28 x 15 x 28mm compression, 28 x 22 x 28mm compression, 28 x 22 x 22mm compression, 28 x 28 x 15mm compression, 28 x 28 x 22mm compression, 35 x 35 x 15mm compression, 35 x 35 x 22mm compression, KSO09 threaded centre teesCxCxFI: 15mm compression, x 15mm compression, x ¼" BSP (F), 15mm compression, x 15mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x 1" BSP (F). KSO10 threaded end tees CxFIxC: 15mm compression, x ½" BSP (F) x 15mm compression, 22mm compression, x ¾" BSP (F) x 22mm compression, KSO12 stopends-C: 6 - 54mm compression. AF14 straight tap connectors: 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F). KSO15 bent tap connectors: 15mm compression, x ½" BSP (F). KSO06P male elbows-CxMI parallel 6mmx1/4"-54mmx2" 6mm compression, x ¼ " BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼ " BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼ " BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½ " BSP (M), 12mm compression, x ¼ " BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½ " BSP (M), 15mm compression, x ¼ " BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½ " BSP (M), 15mm compression, x ¾ " BSP (M), 18mm compression, x ½ " BSP (M), 22mm compression, x ½ " BSP (M), 22mm compression, x ¾ " BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾ " BSP (M), 28mm compression, x 1" BSP (M), 28mm compression, x 1-¼ " BSP (M), 35mm compression, x 1-¼ " BSP (M), 42mm compression, x 1-½ " BSP (M), 54mm compression, x 2" BSP (M). KSO14 straight tap connectors 15mm x 1/2"-22mm x1" 15mm compression, x ½ " BSP (F), 15mm compression, x ¾ " BSP (F), 22mm compression, x ¾ " BSP (F), 22mm compression, x 1" BSP (F).
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2205364

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chromium or matt black finish), incorporating a ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2205364
Expiry date:
31/05/2027
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ½” BSP captive nut end connections.
Marking:
Cooke & Lewis & date of manufacture MM/DD/YY on body
Installation Requirements:
R001 R006 R009 R010
Model:
3663602930174 & 3663602930334
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2206061

Range of single hole, single outlet (fixed) electronically controlled combination tap assembles with brass bodies (various finishes). Flow is controlled via a solenoid valve activated via an infra -red sensor. The temperature is controlled via a ceramic cartridge and a single lever operating member. The spout outlet incorporates a pull-out spray with a plastic aerator. The trigger on the pull-out controls optional spray. The inlet adaptor incorporates a single check valve cartridge (verified by test, suitable for backflow protection against fluid category 2). The outlet incorporates a stainless-steel strainer and an aerator. Maximum working pressure 5.0 bar Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2206061
Expiry date:
30/06/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connection attached to check valve bodies with ½” BSP female inlets.
Marking:
Kingfisher Good Home Logo on body
Installation Requirements:
R001 R009 R090
Model:
5059340452524
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2012109

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with a pull-out spray mechanism. Flow is controlled via a ceramic cartridge headwork with a single lever operating member incorporating an infra-red sensor on the swivel arm which operates a solenoid valve. The spout outlet incorporates a plastic aerator and a hand spray mechanism, and the product is supplied with metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2012109
Expiry date:
31/12/2025
Size:
Stainless steel braided PE-X lined flexible hose assemblies with 1/2" BSP captive nut.
Marking:
Kingfisher good home logo on tap body
Installation Requirements:
R001 R006 R009 R010
Model:
5059340452555 Kitchen Mixer Chrome
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2211057

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass) incorporating ceramic cartridge headworks and single lever operating members. The spout outlet is a pull-out spray type. The spout inlets incorporate approved check valve cartridges; however, the complete assembly has not been tested to demonstrate it provides backflow prevention. The spout outlets incorporate plastic aerators. The inlet hoses incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2211057
Expiry date:
30/11/2027
Size:
PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP captive nut
Marking:
Cooke & Lewis & date of manufacture MM/YY on body
Installation Requirements:
R001 R009 R090
Model:
3663602929956, 3663602929963 & 5059340504360 (stainless steel Brushed)
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 7 of 9

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.