Reliance Worldwide Corporation (UK) Ltd. Approvals


#2001804

Range of in-line non-verifiable single check valve assemblies consisting of a spring loaded resilient trim single check valve cartridge housed within a DZR brass body. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2001804
Expiry date:
31/01/2025
Size:
See model.
Marking:
R, EB, CR, flow arrow, size on body
Installation Requirements:
R001
Model:
Floguard FLOW235001: 15mm Compression Floguard FLOW235002: 22mm Compression Floguard FLOW235003: 28mm Compression Floguard FLOW235004: ½” BSP (F) Floguard Valve FLOW235005: ¾” BSP (F) Floguard FLOW235006: 1” BSP (F) Floguard FLOW235007: 1.1/4” BSP (F) Floguard FLOW235008: 1.1/2” BSP (F) Floguard FLOW235009: 2” BSP (F)
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company
Manufacturer:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2001300

Continuous circulation valve (brass body) incorporating a lever operated spherical valve and a port with a plastic plug. Maximum working pressure 10.0 bar. Maximum operating temperature 30°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2001300
Expiry date:
31/01/2025
Note:
This product has not been tested or approved for anti-legionella claims made by the approval holder. The discharge from the port of this fitting must be made via a type AA, AB or AD air gap, or in accordance with EN 1717.
Size:
1¼” BSP (F)
Marking:
Model ANTI100005: SYR (logo of Hans Sasserath) and flow arrow on body. Technical information on adhesive label on body. Model ANTI100001: DR, RWC logo & SYR logo on body.
Installation Requirements:
R001
Model:
ANTI100005 Model added October 2021: ANTI100001.
Manufacturer:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2001311

Cold water inlet control group consisting of a pressure reducing valve, (adjustable between 1.5 and 3.5 bar, but are supplied pre-set from the factory at 3.0 bar) and a pressure relief valve (pre-set at 8.0 bar) housed within a DZR brass body. The product incorporates a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The pressure relief valve is fitted with a rotary type easing gear. Cold water use only. Maximum inlet supply pressure 16.0 bar.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2001311
Expiry date:
31/01/2025
Size:
22mm compression
Marking:
WRAS, CR, PN16, DN20, flow arrow and date of manufacture (D-WW-YY) on body. Reliance Water Controls on cap of pressure reducing valve. Reliance Water Controls, 8 bar, CR, flow arrow and ½” on pressure relief valve.
Installation Requirements:
R001 R120
Model:
CWIC200056
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2001803

Range of in-line screwdriver and lever operated spherical valves with chromium plated brass bodies and balls, EPDM seals and ‘sharkbite’ push fit end connections. Maximum working pressure 10.0 Bar. Maximum operating temperature 90°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2001803
Expiry date:
31/01/2025
Size:
See model
Marking:
Sharkbite logo, flow arrow, size, sharkbite (brand of Reliance Worldwide Corporation (UK) Ltd.) and S followed by date of manufacture (WW/YY) on body.
Installation Requirements:
R001
Model:
SB2415 – 15mm x 15mm pushfit. SB1915 – 15mm x 15mm pushfit. SB1922 – 22mm x 22mm pushfit.
Manufacturer:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2003021

Reliance range of in line adjustable pressure reducing valves with DZR brass bodies and EPDM diaphragm. The outlet pressures can be set in the range 1.5 – 5.5 bar via a screw cap. To be used with copper, polybutylene (manufactured to BS7291-2) and PEX (manufactured to BS7291-3) pipes. Maximum inlet supply pressure 16.0 bar. Cold water use only.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2003021
Expiry date:
31/03/2025
Size:
15mm or 22mm pushfit inlet and outlet
Marking:
JG, DR and flow arrow on body. JG, outlet pressure and max temperature on neck of operating member.
Installation Requirements:
R001
Model:
PRED 312100 & PRED 312110
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2010312

Range of adjustable in-line pressure reducing valves with bronze bodies and manually operated pressure reducing mechanism. Outlet pressure adjustable between 1.5 to 6.0 bar. Maximum supply pressure 16.0 bar. Maximum operating temperature 60°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2010312
Expiry date:
31/10/2025
Size:
DN65, DN80 & DN100.
Marking:
Reliance logo, model & technical information on adhesive label on valve body. Size and flow arrow on body.
Installation Requirements:
R001
Model:
PRED624001 DN65 Reliance 6247. PRED624002 DN80 Reliance 6247. PRED624003 DN100 Reliance 6247.
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2010335

Range of lever operated spherical valves incorporating brass bodies and brass ball (various finishes) to be used with PEX pipe (manufactured to BS7291 part 3), Polybutylene Pipe (manufactured to BS7291 Part 2) and copper pipe (manufactured to EN1057). Maximum working pressure 6.0 bar (for PEX and Polybutylene pipe). Maximum working pressure of 20.0 bar (for copper pipe). Maximum operating temperature 95˚C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2010335
Expiry date:
31/10/2025
Size:
See model
Marking:
Sharkbite logo (shark), size and 200 PSI on Body. Sharkbite logo (shark), size and SXXXX (S represents manufacturer location and XXXX represents week and year of manufacturer) on Push fit and caps. Sharkbite logo (shark), WRAS approved product and on/off rotation arrows on handle.
Installation Requirements:
R001
Model:
Chrome plated: SB2715 – 15mm Push fit x 15mm Push fit. SB2722 – 22mm Push fit x 22mm Push fit. SB2728 – 28mm Push fit x 28mm Push fit. Nickel plated: SB3515B - 15mm Push fit x 15mm Push fit SB3515R - 15mm Push fit x 15mm Push fit. SB3522B - 22mm Push fit x 22mm Push fit. SB3522R - 22mm Push fit x 22mm Push fit.
Manufacturer:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2011081

Combined temperature and pressure relief valve incorporating a gunmetal body and manually operated lever-type easing gear. Factory set at 7.0 bar. Maximum operating temperature 95°C.

Section:
2030 Valves
Section Subtitle:
Combined thermal and pressure relief.
WRAS Approval Number:
2011081
Expiry date:
30/11/2025
Size:
15mm compression inlet x ½” BSP outlet
Marking:
RWC and technical information on cap. Flow arrow on body.
Installation Requirements:
R001
Model:
PTEM200009
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2007362

Cold water inlet control group with a DZR brass body consisting of a pressure reducing valve (with an adjustbale range between 1.5 and 3.5 bar, but factory pre-set at 3.0 bar), which incorporates a stainless steel strainer, and a pressure relief valve (pre-set at 6.0 bar). The product incorporates a single check valve cartridge (verified by test, suitable for backflow protection against Fluid Category 2). The expansion valve is fitted with a rotary type easing gear. Maximum inlet supply pressure 16.0 bar. Cold water use only.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2007362
Expiry date:
31/07/2025
Size:
22mm compression.
Marking:
Reliance Water Controls and pressure on cap. PN, DN, flow arrow, size (½” on pressure relief valve), WRAS, CR and date of production DDMYY on body. Reliance on cap.
Installation Requirements:
R001
Model:
CWIC200001
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2012071

Range of screw down stop valves with plastic bodies to be used with PEX, MDPE and copper pipe. For above ground use only. Maximum working pressure 16.0 bar, cold water use only.

Section:
2320 Valves
Section Subtitle:
Stop, plastic, screw down.
WRAS Approval Number:
2012071
Expiry date:
31/12/2025
Note:
To be used with PE pipes manufactured to EN 12201, Copper pipe to BS EN 1057 or PEX pipes to BS7291.
Size:
See Model
Marking:
John Guest Logo and flow arrow on body. John Guest, size and PN on collet.
Installation Requirements:
R001
Model:
Stop Valves for use with PE Pipes: UGSTV2020 - 20mm pushfit x 20mm pushfit Stop Cock UGSTV2525 - 25mm pushfit x 25mm pushfit Stop Cock UGSTV3232 - 32mm pushfit x 32mm pushfit Stop Cock Stop Valves for use with PE x Copper or PEX Pipes: UGSTV2515 - 25mm pushfit x 15mm pushfit Stop Cock UGSTV2522 - 25mm pushfit x 22mm pushfit Stop Cock
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2102701

Drain cock elbow incorporating a DZR brass body with EPDM ’O’-rings (ZELB250445 model) or NBR ‘O’-rings (ZELB250446 model added July 2022). Both models are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressures: ZELB250445 model - 10.0 Bar. ZELB250446 - 16.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
2102701
Expiry date:
28/02/2026
Size:
See model.
Marking:
ZELB250445 model: RWC, CR and size on body. ZELB250446 model added July 2022: RWC, CR, size and BS2879 on body.
Installation Requirements:
R001 R511
Model:
ZELB250445: 22mm compression x ¾” BSP (M). Model added July 2022: ZELB250446 model: 28mm compression x 1” BSP (M).
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2101026

Range of combined thermal balancing and pressure reducing valves with gun metal bodies, stainless-steel strainer, pressure gauge and temperature gauge. Maximum inlet supply pressure 16.0 bar. Outlet pressure range of 1.5 bar – 5.5 bar. Maximum operating temperature 85°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2101026
Expiry date:
31/01/2026
Size:
½” BSP (F) inlet x ½” BSP (F) outlet. ¾” BSP (F) inlet x ¾” BSP (F) outlet.
Marking:
Reliance Water Controls on temperature gauge. Flow arrow and DR on body. Reliance Water Controls & technical information on cap.
Installation Requirements:
R001
Model:
TREG200001 & TREG200002
Manufacturer:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2101004

Range of polypropylene push-fit fittings and inserts for use with MDPE pipe (manufactured to BS EN 12201). For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2101004
Expiry date:
31/01/2026
Size:
20mm & 25mm
Marking:
PN, JG and size on body
Installation Requirements:
R001
Model:
UG101B - 20 x 1/2" BSP MALE ADAPTOR UG102B - 25 x 3/4" BSP MALE ADAPTOR UG201B - 20mm EQUAL TEE UG202B - 25mm EQUAL TEE UG222025B - 20 x 25mm STEM ELBOW UG222525B - 25 x 25mm STEM ELBOW UG301B - 20mm EQUAL ELBOW UG302B - 25mm EQUAL ELBOW UG401B - 20mm EQUAL STRAIGHT CONNECTOR UG402B - 25mm EQUAL STRAIGHT CONNECTOR UG4501B - 20 x 1/2" FEMALE ADAPTOR UG4502B - 25 X 3/4" FEMALE ADAPTOR UG4620B - 20mm STOP END UG4625B - 25mm STOP END UG501B - 25 x 20mm REDUCING STRAIGHT CONNECTOR UG801E - 20mm PLUG UG802E - 25mm PLUG UGPWB1514 - 15 x 1/2" WING BACK ELBOW UGPWB2014 - 20 x 1/2" BACK PLATE ELBOW UGPWB2514 - 25 x 1/2" BACK PLATE ELBOW UGPWB2516 - 25 x 3/4" BACK PLATE ELBOW UTS147-DB - 20MM PIPE INSERT UTS197-DB- 25MM PIPE INSERT
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2101045

Range of polypropylene push-fit fittings with inserts for use with MDPE Pipe (manufactured to BS EN 12201-2) on one side of the fitting and PB (BS 7291), PEX (BS 7291) or Copper (BS EN 1057) on the other. Models UTS147-DB, UTS197-DB & UTS251-DB are for above and below ground use. All other models are for above ground use only. Maximum working pressure when using 20mm pipe is 16.0 bar. Maximum working pressure when using 25mm & 32mm pipe is 12.5 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2101045
Expiry date:
31/01/2026
Marking:
PN, JG & size on protective cap.
Installation Requirements:
R001
Model:
Above ground use only. UG601B - 20 x 15MM PE-COPPER COUPLER. UG602B - 25 x 22MM PE-COPPER COUPLER. UG603B - 25 x 15MM PE-COPPER COUPLER. UG604B - 32 x 28MM PE-COPPER COUPLER. UG063228B - 32 X 28MM REDUCER. Above and below ground use. UTS147-DB - 20MM PIPE INSERT UTS197-DB - 25MM PIPE INSERT UTS251-DB - 32MM PIPE INSERT
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2012087

Range of flow switches with brass bodies incorporating EPDM ‘O’-rings, acting as a leak detection system that actuates an integral spherical valve to shut off the water supply. The inlet incorporates a stainless steel strainer. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 30°C.

Section:
1719 Flow Activated Switches
WRAS Approval Number:
2012087
Expiry date:
31/12/2025
Note:
Cannot be used as the main stop valve into a premises. The fitting listed on this approval has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed.
Size:
¾”, 1” & 1¼” BSP (M) inlet/outlet.
Marking:
RELIANCE VALVES ON PLASTIC COVER
Installation Requirements:
R001
Model:
LEKP100001 - ¾, LEKP100002 1” & LEKP100003 1¼ FLOW ACTIVATED SWITCHES
Manufacturer:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2104338

‘Ausimix’ compact range of ‘T’-type thermostatic blending valves with nickel plated DZR brass bodies. Each inlet incorporates a stainless-steel strainer and a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The SBHEAT110780, SBHEAT110785, HEAT110780 & HEAT110785 models also have angled isolation valves at both inlets. Maximum working pressures and operating temperatures: Existing push fit models: For use with PEX pipe (manufactured to BS7291 part 3) and Polybutylene pipe (manufactured to BS7291 part 2): 12.0 bar, cold water use only. 6.0 bar @ 95°C. For use with copper pipe: Maximum working pressure 10.0 bar. Maximum operating temperature 95°C. Compression models added October 2023: For use with copper pipe to BSEN1057:2006: Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2104338
Expiry date:
30/04/2026
Size:
15mm push fit fitting (SBHEAT110750 & SBHEAT110780), 22mm push fit fitting (SBHEAT110755 & SBHEAT110785). Models added October 2023: 15mm compression (HEAT110750 & HEAT110780), 22mm compression (HEAT110755 & HEAT110785),
Marking:
Ausimix logo (graphical outline of a Kangaroo), Ausimix and TMV2/3 on cap. Date of production (DWWYLL) on main body. Date of production (WWYY prefixed with the letter S), size and sharkbite logo (graphical outline of a Shark) on inlet and outlet connections. Models added October 2023: Ausimix logo (graphical outline of a Kangaroo) on cap. Ausimix logo (graphical outline of a Kangaroo), CR, date of manufacture (DWWYYLL, LL = production line) and flow arrow on body. (Ausimix and Sharkbite are brands of the Reliance Worlwide Corporation).
Installation Requirements:
R001 R040 R120
Model:
SBHEAT110750 - Ausimix 15mm (2 in 1), SBHEAT110755 - Ausimix 22mm (2 in 1), SBHEAT110780 - Ausimix 15mm (4 in 1), SBHEAT110785 - Ausimix 22mm (4 in 1). Models added October 2023: HEAT110750 - Ausimix 15mm (2 in 1), HEAT110755 - Ausimix 22mm (2 in 1), HEAT110780 - Ausimix 15mm (4 in 1), HEAT110785 - Ausimix 22mm (4 in 1).
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2110002

T-type mixing valve with a DZR brass body (nickel plated), temperature is controlled by a thermostatic cartridge. Each inlet incorporates a combined EPDM washer and stainless steel strainer, and a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). For use with copper pipe manufactured to EN1057. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2110002
Expiry date:
31/10/2026
Marking:
Reliance Water Controls & Heatguard LS2 on Cap. Flow arrow and date of manufacture (D/WW/YY/LL, where LL = production line) on body.
Installation Requirements:
R001 R040 R120
Model:
Heatguard LS2 HEAT260500 – 15mm compression.
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2110098

T-type mixing valve with a DZR brass body (nickel plated), temperature is controlled by a thermostatic cartridge. For use with copper pipe manufactured to EN1057. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2110098
Expiry date:
31/10/2026
Size:
22mm compression.
Marking:
Reliance Water Controls & Heatguard LS2 on Cap. Flow arrow and date of manufacture (D/WW/YY/LL, where LL = production line) on body.
Installation Requirements:
R001 R010 R040 R120
Model:
Heatguard LS2 HEAT260505.
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2110005

Range of cold water inlet control groups with DZR brass bodies, consisting of a pressure reducing valve, (all models are adjustable between 1.0 and 6.0 bar, but some come pre-set from the factory - see model), a pressure relief valve (set at 6.0 or 8.0 bar - see model) and a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The pressure relief valve is fitted with a rotary type easing gear. All products for use with copper pipe manufactured to BS EN 1057. Maximum inlet supply pressure 20.0 bar. Cold water use only.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2110005
Expiry date:
31/10/2026
Size:
28mm compression inlet/outlet
Marking:
RWC, SYR, DR and flow arrow on body. RELIANCE WATER CONTROLS and pressure on cap.
Installation Requirements:
R001 R120
Model:
CWIC352300, CWIC352301, CWIC352302, CWIC352306, CWIC352310 CWIC352300 (pressure reducing valve pre-set at 3.5 bar, pressure relief valve is set at 6.0 bar). CWIC352301 (pressure reducing valve pre-set at 1.0 bar, pressure relief valve is set at 6.0 bar). CWIC352302 (pressure reducing valve pre-set at 3.5 bar, pressure relief valve is set at 6.0 bar). CWIC352303 (pressure reducing valve pre-set at 3.5 bar, pressure relief valve is set at 8.0 bar). CWIC352306 (pressure reducing valve pre-set at 2.1 bar, pressure relief valve is set at 8.0 bar). CWIC352310 (pressure reducing valve is adjustable between 1.0 & 6.0 bar, pressure relief valve set at 8 bar).
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2110096

Range of multi-layered flexible hoses (TPE inner liner/PVC middle/PVC outer with polyester braiding in-between) and stainless-steel braided EPDM flexible hoses. The hoses are supplied with a variety of end connections incorporating brass barbed hose inserts or white plastic barbed hose inserts. The hoses may also incorporate a servicing valve (see model). The push fit connectors are to be used with copper pipe (Manufactured to EN1057), PB pipe (Manufactured to BS EN21003) & PE-x pipe (manufactured to BS EN7291-3). Products shown with a “P” suffix (eg. WFLX15P, FLX43P) are a prepacked variant of the original product eg. WFLX15, FLX43. Products shown with a “SB” suffix (eg. FLX15P-SB, WFLX28-SB) are a reduced box quantity of an existing product. Maximum working pressure and operating temperature: 12.0 bar @ 20°C and 6.0 bar @ 65°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2110096
Expiry date:
31/10/2026
Size:
See model.
Marking:
John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.), WRAS, date of manufacture (YYWW), maximum temperature and pressure on hose. John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.), size and maximum temperature on connector. Markings added December 2022: WRAS & DoM (YYYY) on ferrule (braided hoses only) or WRAS, DoM (YYYY) & other technical info on hose body (non-braided hoses only). JG (John guest Logo), Size and Max Temperature on Pushfit Connector (When applicable). JG (John guest Logo) and Size on Service Valve (when applicable).
Installation Requirements:
R001 R008
Model:
Speedfit x Union Nut 300mm hose: WFLX15: 15mm push-fit x ½” BSP captive nut WFLX16: 15mm push-fit x ¾” BSP captive nut WFLX22: 22mm push-fit x ¾” BSP captive nut Speedfit x Union Nut: 500mm hose: WFLX18: 15mm push-fit x ½” BSP captive nut WFLX20: 15mm push-fit x ¾” BSP captive nut WFLX19: 22mm push-fit x ¾” BSP captive nut Speedfit x Union Nut: 1000mm hose: WFLX40: 15mm push-fit x ½” BSP captive nut Speedfit x Union Nut with Service Valve: 300mm hose: WFLX37-H: 15mm push-fit x ½” BSP captive nut service valve hose WFLX39-H: 22mm push-fit x ¾” BSP captive nut service valve Hose Speedfit x Speedfit: 300mm hose: WFLX33: 10mm push-fit x 15mm push-fit WFLX17: 15mm push-fit x 15mm push-fit Speedfit x Speedfit: 500mm hose: WFLX21: 15mm push-fit x 15mm push-fit Elbow Pattern: 300mm hose: WFLX36: 15mm push-fit x ½” BSP captive nut Elbow Speedfit x Hand Tighten Nut: 300mm hose: PFLX15: 15mm push-fit x ½” BSP captive nut PFLX16: 15mm push-fit x ¾” BSP captive nut PFLX22: 22mm push-fit x ¾” BSP captive nut Speedfit x Hand Tighten Nut: 500mm hose: PFLX18: 15mm push-fit x ½” BSP captive nut PFLX19: 22mm push-fit x ¾” BSP captive nut Speedfit x Hand Tighten Union Nut with Service Valve: 300mm hose: PFLX37: 15mm push-fit x ½” BSP captive nut service valve hose PFLX37-H: 15mm push-fit x ½” BSP captive nut service valve with handle hose Speedfit x Hand Tighten Union Nut with Service Valve: 500mm hose: PFLX78: 15mm push-fit x ½” BSP captive nut service valve hose Extra Flexi Speedfit x Hand tighten Nut: 300mm hose: PFLX88: 15mm push-fit x ½” BSP captive nut Speedfit with Plastic Valve with Handle x Bulkhead connection: 429mm hose: NCWFLX54-H: 15mm push-fit service valve x ½” BSP bulkhead Speedfit with Elbow Plastic Valve with Handle x Bulkhead connection: 530mm hose: NCWFLX58-H: 15mm push-fit x ½” BSP Elbow Service Valved hose Speedfit with Plastic Valve with Handle x Hand Tighten Union Nut: 342mm hose: NCWFLX37-H: 15mm Plastic Valved Hose Connector x ½” Flexi Hose Models added December 2022. Speedfit x Union Nut: 300mm hose: WFLX15-SB: 15mm push-fit x ½” BSP captive nut, 300mm hose. WFLX16-SB: 15mm push-fit x ¾” BSP captive nut, 300mm hose. WFLX22-SB: 22mm push-fit x ¾” BSP captive nut, 300mm hose. For Monobloc Mixers WFLX28: 15mm push-fit x M10 monobloc hose kit, 300mm hose. WFLX29: 15mm push-fit x M12 monobloc hose kit, 300mm hose. Speedfit with Shut Off Valve and Hand Tighten Union Nut x Bulkhead, Short. NCWFLX98-H: 1/2” bsp BULKHEAD x 1/2 bsp Shut Off Valve Flexi Hose. (Short). SPEEDFIT X UNION NUT: 100mm hose FLX43: 15mm pushfit x ½” captive nut - 150mm hose SPEEDFIT X UNION NUT: 300mm hose FLX35, FLX35P: 15mm pushfit x ⅜” captive nut - 300mm hose FLX15, FLX15P, FLX15P-SB: 15mm pushfit x ½” captive nut - 300mm hose FLX16, FLX16P, FLX16P-SB: 15mm pushfit x ¾” captive nut - 300mm hose FLX22, FLX22P, FLX22P-SB: 22mm pushfit x ¾” captive nut - 300mm hose SPEEDFIT X UNION NUT: 500mm hose FLX18, FLX18P, FLX18P-SB: 15mm pushfit x ½” captive nut - 500mm hose FLX20, FLX20P, FLX20P-SB: 15mm pushfit x ¾” captive nut - 500mm hose FLX19, FLX19P, FLX19P-SB: 22mm pushfit x ¾” captive nut - 500mm hose. FLX23, FLX23P: 22mm pushfit x ¾” captive nut - 500mm hose SPEEDFIT X UNION NUT: 1000mm hose FLX40, FLX40P: 15mm pushfit x ½” captive nut - 1000mm hose FLX42, FLX42P: 15mm pushfit x ¾” captive nut - 1000mm hose FLX41, FLX41P: 22mm pushfit x ¾” captive nut - 1000mm hose SPEEDFIT X UNION NUT WITH SERVICE VALVE FLX37, FLX37P, FLX37P-SB: 15mm pushfit x ½” captive nut - 300mm hose – Service Valve, FLX39, FLX39P: 22mm pushfit x ¾” captive nut - 300mm hose – Service Valve, FLX37-H: 15mm pushfit x ½” captive nut - 300mm hose – Service Valve and handle FLX39-H: 22mm pushfit x ¾” captive nut - 300mm hose – Service Valve and handle, SPEEDFIT X UNION NUT WITH SERVICE VALVE W/ METAL CONNECTIONS 300mm hose FLX24, FLX24P, FLX24P-SB: 15mm pushfit x ½” captive nut - 300mm – Service Valve FLX25, FLX25P: 22mm pushfit x ¾” captive nut - 300mm – Service Valve.   SPEEDFIT X UNION NUT WITH SERVICE VALVE W/ METAL CONNECTIONS 500mm hose FLX31, FLX31P: 15mm pushfit x ½” captive nut - 500mm – Service Valve, FLX38, FLX38P: 15mm pushfit x ¾” captive nut - 500mm – Service Valve, SPEEDFIT X SPEEDFIT- 300mm hose FLX33P: 10mm pushfit x 15mm pushfit - 300mm hose FLX17, FLX17P, FLX17P-SB: 15mm pushfit x 15mm pushfit - 300mm hose FLX26, FLX26P: 22mm pushfit - 22mm pushfit - 300mm hose SPEEDFIT X SPEEDFIT- 500mm hose FLX21, FLX21P FLX21P-SB: 15mm pushfit x 15mm pushfit - 500mm hose FLX27, FLX27P: 22mm pushfit - 22mm pushfit - 500mm hose SPEEDFIT X SPEEDFIT- 1000mm hose FLX47: 15mm pushfit x 15mm pushfit - 1000mm hose SPEEDFIT X SPEEDFIT WITH SERVICE VALVE – 300mm hose FLX44, FLX44P: 15mm pushfit x 15mm pushfit - 300mm hose – Service Valve SPEEDFIT X SPEEDFIT WITH SERVICE VALVE – 500mm hose FLX45, FLX45P: 15mm pushfit x15mm pushfit - 500mm hose – Service Valve SPEEDFIT X MALE FLX49: 15mm pushfit x ⅜” captive nut - 300mm hose SPEEDFIT X PLAIN STEM FLX53: 15mm pushfit x 15mm tube stem - 300mm hose ELBOW PATTERN FLX36, FLX36P, FLX36P-SB: 15mm pushfit x ½” captive nut (elbow) - 300mm hose, FOR MONOBLOC MIXERS-300mm hose FLX48: 12mm pushfit x M10 male thread - Monobloc Kit -300mm hose FLX28: 15mm pushfit x M10 male thread - Monobloc Kit -300mm hose FLX29, FLX29-SB: 15mm pushfit x M12 male thread - Monobloc Kit-300mm hose Pre-packaged models have a ‘P’ suffix, e.g. WFLX15P.
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2109378

Expansion vessels incorporating a stainless steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100˚C.

Section:
1000 Expansion Vessels
WRAS Approval Number:
2109378
Expiry date:
30/09/2026
Size:
½” BSP (M)
Marking:
Aquasystem, model, serial No, date of manufacture (DD/MM/YYY) & other technical information on adhesive label on body.
Installation Requirements:
R001
Model:
XVES050005: 0.50L SHOCK ARRESTOR PRE‐SET 3.5BAR 1/2"MBSP XVES050006: 1L SHOCK ARRESTOR PRE‐SET 3.5BAR 1/2"MBSP XVES050007: 2L SHOCK ARRESTOR PRE‐SET 3.5BAR 1/2"MBSP
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company
Manufacturer:
Zilio Industries SPA
Company Name
Zilio Industries SPA
Address
Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
Phone
[+39] 049 59 57 552

View All Listings by this Company

Print This Approval


#2201039

Range of pressure reducing valves with DZR brass bodies. The capillary union and compression models are for use with copper pipe (manufactured to BSEN 1057). The inlets incorporate a stainless strainer. Maximum supply pressure 21.0-25.0 bar - outlet adjustment range: 2.5 bar min. outlet pressure, 6.0 bar maximum outlet pressure. Maximum supply pressure 16.0-20.0 bar - outlet adjustment range: 2.0 bar min. outlet pressure, 6.0 bar maximum outlet pressure. Maximum supply pressure 11.0-15.0 bar - outlet adjustment range: 1.5 bar min. outlet pressure, 6.0 bar maximum outlet pressure. During January 2022 these products were for cold water use only. Between February 2022 and January 2027 the products are for use with water up to 65°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2201039
Expiry date:
31/01/2027
Size:
Please refer to model.
Marking:
Reliance Water Controls or RWC on pressure adjuster. DR, size and flow arrow on body
Installation Requirements:
R001 R120
Model:
PRED315010: ½” BSP (M). PRED315020: ¾” BSP (M). PRED315030: 1” BSP (M). PRED315040: 1¼” BSP (M). PRED315050: 1½” BSP (M). PRED315060: 2” BSP (M). PRED315070: 15mm Capillary Union. PRED315080: 22mm Capillary Union. PRED315090: 28mm Capillary Union. PRED315110: 28mm Compression.
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2201040

‘Easiset 320 series’ adjustable (in-line) pressure reducing valves with DZR brass bodies. Compression and pushfit models are for use with copper pipe (manufactured to BS EN 1057:2006+A1:2010). From March 2022 the pushfit models can also be used with PB pipe (manufactured to BS EN 7291-2:2010) and PEX pipe (manufactured to BS EN 7291-3:2010). Maximum inlet supply pressure: 16.0 bar all models with copper pipe. From March 2022: SBPRED320001 & SBPRED320005 models: 12.0 bar with PEX & PB pipe. SBPRED320050 & SBPRED320055 models: 6.0 bar with PEX & PB pipe. Maximum outlet pressure 1.5 bar to 5.5 bar. Maximum operating temperature: COLD WATER EASISET 320 SERIES: 45°C with copper pipe, and from March 2022: cold water use only with PEX & PB pipe. HOT WATER EASISET 320 SERIES: 80°C with copper pipe, and from March 2022: 80°C with PEX & PB pipe.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2201040
Expiry date:
31/01/2027
Size:
See model.
Marking:
All models: RELIANCE WATER CONTROLS, maximum temperature, and pressure range on operating member ring. DN, DR and flow arrow on body. Additional marking SBPRED models only: SHARKBITE (brand of Reliance Worldwide Corporation (UK) Ltd), Sharkbite logo (silhouette of a shark) and size on fittings.
Installation Requirements:
R001 R120
Model:
COLD WATER EASISET 320 SERIES: PRED320001: ½” BSP (F). PRED320003: ½” BSP (M). PRED320005: ¾” BSP (F). PRED320011: ¾” BSP (M). PRED320010: 15mm compression. PRED320015: 22mm compression. SBPRED320001: 15mm pushfit. SBPRED320005: 22mm pushfit. HOT WATER EASISET 320 SERIES: PRED320050: ½” BSP (F). PRED320051: ½” BSP (M). PRED320055: ¾” BSP (F). PRED320056: ¾” BSP (M). PRED320060: 15mm compression. PRED320065: 22mm compression. SBPRED320050: 15mm pushfit. SBPRED320055: 22mm pushfit.
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2203025

Range of T type thermostatic blending valves with (nickel plated) DZR brass bodies. The inlets incorporate a stainless-steel strainer and single check valve cartridge verified by test (suitable for backflow protection against Fluid Category 2) Models HEAT160030 & HEAT160035 also incorporate a servicing valve at the inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2203025
Expiry date:
31/03/2027
Note:
Suitable for use with copper pipe (manufactured to BS EN 1057:2006+A1:2010), PB pipe (BS EN 7291-2:2010) and PEX pipe (BS EN 7291-3:2010).
Size:
15mm or 22mm compression inlet/outlet.
Marking:
Models HEAT160020, HEAT160030, HEAT160035: Reliance Water Controls on cap. Reliance & Heatguard on collar. Model HEAT160015: Reliance logo, Heatguard TMV3, date code and ID code on body.
Installation Requirements:
R001 R010 R120
Model:
HEATGUARD TMV3-8 range comprising of models: HEAT160020, HEAT160030, HEAT160035, Model added January 2023 HEAT160015.
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2203703

Vacuum relief valve with a DZR brass body. Maximum working pressure 16.0 bar. Maximum operating temperature 99˚C

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2203703
Expiry date:
31/03/2027
Size:
½” BSP (M)
Marking:
Reliance, date of manufacture (D/WW/Y), DR and technical information on cap.
Installation Requirements:
R001
Model:
ADMT503001
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2204040

Screw down stop valve with DRZ brass body and bonnet, incorporating NBR sealing washer and a T type operating member. For use with Copper pipe (BS EN 1057), PB Pipe with inserts (BS EN 7291) and PEX Pipe with inserts (BS EN 7291) Maximum working pressure 12.0 bar. Cold water use only.

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2204040
Expiry date:
30/04/2027
Size:
15MM Push-Fit
Marking:
John Guest logo, size, flow arrow, BS1010-2 & CR on body
Installation Requirements:
R001 R120
Model:
15BSC
Manufacturer:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2206012

Range of combined temperature and pressure relief valves incorporating DZR brass bodies, and a silicone diaphragm. The valves are pre-set at 4.5, 6.0, 7.0 or 10 bar (see models). The valves incorporate a manually operated rotational easing gear and are for use with copper pipe (EN1057) Please refer to model for maximum working pressure. Maximum operating temperature 95°C

Section:
2030 Valves
Section Subtitle:
Combined thermal and pressure relief.
WRAS Approval Number:
2206012
Expiry date:
30/06/2027
Size:
½” BSP (M) x 15mm Compression (Models ending 001, 005, 010, 015, 020, 030, 040, 045, 100, 110 & 115). 15mm Compression x 15mm Compression (Model ending 105 & 025). ¾” BSP (M) x 22mm Compression (Models ending 200, 205, 210 & 250)
Marking:
Reliance, EN 1490, WRAS maximum temperature, pressure and technical information on cap. DR on body.
Installation Requirements:
R001
Model:
4.5 bar: PTEM540015 & PTEM585200, 6.0 bar: PTEM540020 & PTEM540115 7.0 bar: PTEM540001, PTEM540010, PTEM540030, PTEM540100, PTEM540105, PTEM540025, PTEM585205 & PTEM585250 10.0 bar: PTEM540005, PTEM540110 & PTEM585210. MODELS ADDED JUNE 2024: PTEM540040 - 6.0 bar PTEM540045 - 10.0 bar
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2211704

Spherical valve with a brass body and ball, PTFE seat, EPDM ‘O’-rings, a lever operating member and a drain connection outlet. Compression end connection for use with copper pipe (manufactured to BS EN 1057). The product is supplied with a brass cap and an EPDM washer which is interchangeable with the hose union spigot outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
2211704
Expiry date:
30/11/2027
Size:
15mm compression x 15mm hose union spigot.
Marking:
RWC, size and BS EN 1254-2 on compression nut.
Installation Requirements:
R001 R511
Model:
BALV900003 (BALL VALVE 100C WITH DRAIN CONNECTION).
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2210018

Range of combination valves with a DZR brass body incorporating a pressure reducing valve, a ball valve, pressure gauge and water meter port. The outlet incorporates two single check valve cartridges, verified by test suitable for backflow to fluid category 3. Maximum working pressure 16 Bar Outlet pressure in the range 6.0 to 1.5 bar. Maximum operating temperature 80°C

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2210018
Expiry date:
31/01/2027
Size:
Please refer to model.
Marking:
RWC, PN, DR, DN and flow arrow on body. Reliance valves, pressure and max temp on pressure reducing valve ring. RWC and flow arrow on insulation jacket.
Installation Requirements:
R001 R120
Model:
TVAP201001 – ¾” BSP female inlet/outlet TVAP201005 – 1” BSP female inlet/outlet
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2212014

Range of tank and cistern connectors, with push fittings. Models CM0715S and CM0722S are for use with copper tube (manufactured to BS EN 1057) PE-X pipe (BS7291-3) & PB pipe (BS7291-2). Until April 2023, model CM0728S was only for use with copper tube (manufactured to BS EN 1057). From May 2023, model CM0728S is also for use with PE-X pipe (BS7291-3) & PB pipe (BS7291-2). Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2212014
Expiry date:
31/12/2027
Note:
CM0728S only for use with copper pipe to BS EN 1057.
Size:
15mm, 22mm, 28mm - pushfit
Marking:
John Guest logo “JG” (brand of Reliance Worldwide Corporation (UK) Ltd.) and size on body.
Installation Requirements:
R001
Model:
CM0715S - 15mm Tank Connector. CM0722S - 22mm Tank Connector. CM0728S - 28mm Tank Connector.
Manufacturer:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2212035

Range of core manifolds (DZR brass body) incorporating a pressure relief valve (plastic body), with an EPDM diaphragm and ‘O’-rings. For use with copper pipe (manufactured to BS EN 1057). The pressure relief valve is pre-set at 6.0 or 8.0 bar (see models). The product incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum operating pressure 16.0bar. Cold water use only.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
2212035
Expiry date:
31/12/2027
Size:
28mm compression inlet and outlet on valve body. 22mm compression outlet on PRV.
Marking:
RWC, SYR, DR and flow arrows on manifold. SYR and flow arrow on pressure relief valve. Reliance Water Controls and pressure on pressure relief valve cap.
Installation Requirements:
R001 R120
Model:
CORE255003 (6.0 bar pressure relief valve), CORE255004 (8.0 bar pressure relief valve).
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2303016

Range of inlet control valves with DZR brass bodies incorporating a pressure reducing valve (set at 1.5, 1.8. 2.0, 2.1, 3.0 or 3.5 depending on model) and a pressure relief valve (set at 3.0, 3.5, 4.5, 5.0. 6.0 or 8.0 depending on model. All models incorporate a stainless-steel mesh and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Model CWIC355040 comes supplied with a tundish. For use with copper pipe to BS EN 1057, PB pipe (with inserts) to BS EN 7291-2:2010 and PEX pipe (with inserts) to BS EN 7291-3:2010. Maximum working pressure 16.0. Maximum operating temperature of 25°C.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2303016
Expiry date:
31/03/2028
Size:
22mm compression fittings inlet and outlet.
Marking:
RWC, SYR, DR and Flow Arrow on Valve Body. Reliance Water Controls and Pressure on Pressure Reducing Ring. SYR and Flow Arrow on Pressure Relief Valve. Reliance Water Controls and Pressure on Pressure Relief Cap.
Installation Requirements:
R001 R120
Model:
CWIC355025, CWIC355026, CWIC355030, CWIC355035, CWIC355040, CWIC355045, CWIC355050, CWIC355055, CWIC355060, CWIC355065, CWIC355070, CWIC355090, CWIC355200.
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2303019

Range of combination valves consisting of an in-line adjustable pressure reducing valve (between 1.5 and 6.0 bar) and a pressure relief valve, with DZR Brass bodies, EPDM `O`-rings and an EPDM diaphragm. CWIC110004 model - Pressure reducing valve pre-set at 3.5 bar and pressure relief valve set at 6.0 bar. CWIC200055 model - Pressure reducing valve pre-set at 3.0 bar and pressure relief valve set at 4.5 bar. The product incorporates a stainless-steel mesh and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). For use with copper pipe (manufactured to BS EN 1057). Maximum supply pressure 16.0 bar. Outlet pressure range 1.5 bar to 6.0 bar (both models). Maximum operating temperature 20°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2303019
Expiry date:
31/03/2028
Size:
22mm compression inlet and outlet
Marking:
Reliance Water Controls and pressure on pressure reducing valve cap. WRAS, CR, flow arrow, PN & DN on body. Reliance Water Controls and pressure on relief valve cap.
Installation Requirements:
R001 R120
Model:
CWIC110004 CWIC200055
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2303062

Range of plastic push-fit fittings (available in black, white and grey) and a manifold (available in grey only) with EPDM or NBR ‘O’-rings. For use with copper pipe (manufactured to EN1057), PE-X pipe (manufactured to BS7291-3:2010) & PB pipe (BS EN 21003-2:2008). Maximum working pressure: 12.5 bar @ 20°C (Cold water use only). From September 2023 the products are suitable for 8.0 bar @ 65°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2303062
Expiry date:
31/03/2028
Size:
See models.
Marking:
JG logo and size moulded on the collet or body of fitting.
Installation Requirements:
R001 R008
Model:
GREY ACETAL FITTINGS COOLING MANIFOLD: NC2183 15mm x 3/8”. METRIC TO IMPERIAL ADAPTORS STRAIGHT CONNECTOR: NC462 15mm x ½”. UNEQUAL STRAIGHT CONNECTOR: NC2511 15mm x 3/8”. STEM TO TUBE ADAPTOR: NC2164 15mm x 3/8”, NC2173 15mm x ½”. STEM TO HOSE CONNECTOR: NC932 15mm x ½”. TUBE TO HOSE CONNECTOR: NC448 15mm x ½”, NC737 22mm x ½”, NC473 22mm x ¾”. ADAPTOR TEE: NC869 15mm x 15mm x 3/8”. STEM TO STEM ADAPTOR: NC478 15mm x 3/8”. ACETAL CM FITTINGS WITH EPDM O-RINGS FEMALE ADAPTOR WITH BSP THREAD: CM451513FS 15mm x 3/8”. TAP ADAPTOR WITH UNS THREAD: CM3210U7E 10mm x 7/16”. TAP ADAPTOR BSP THREAD: CM321014E 10mm x ½” BSP (F), CM3201S 15mm x ½” BSP (F). TAP ADAPTOR FLAT END BSP THREAD: CM321014FE 10mm x ½” BSP (F). TWO-WAY DIVIDER: CM2315W 15mm. STRAIGHT ADAPTOR BSP THREAD: CM011514S 15mm x ½” (M), CM011216S 22mm x ¾” (M). REDUCING STRAIGHT CONNECTOR: CM201510S 15mm x 10mm, CM201512W 15mm x 12mm. REDUCING ELBOW CONNECTOR: CM211210W 12mm x 10mm. SLIP CONNECTOR: CM-SC-15-S 15mm. STEM ELBOW: CM221515W 15mm x 15mm. BLACK ACETAL FITTINGS (METRIC SIZES) STRAIGHT ADAPTORS BSP THREAD: PM011012E 10mm x ¼” BSP (M), PM011013E 10mm x 3/8” BSP (M), PM011014E 10mm x ½” BSP (M), PM011513E 15mm x 3/8” BSP (M), PM011514E 15mm x ½” BSP (M), PM011516E 15mm x ¾” BSP (M), PM012216E 22mm x ¾” BSP (M). STRAIGHT ADAPTERS BSPT THREAD: PM011002E 10mm x ¼” BSPT (M), PM011003E 10mm x 3/8” BSPT (M), PM011004E 10mm x ½” BSPT (M). EQUAL STRAIGHT CONNECTORS: PM0410E 10mm, PM0415E 15mm, PM0422E 22mm. REDUCING STRAIGHT CONNECTORS: PM201004E 10mm x 4mm, PM201006E 10mm x 6mm, PM201008E 10mm x 8mm, PM201210E 12mm x 10mm. EQUAL ELBOW: PM0310E 10mm, PM0315E 15mm, PM0322E 22mm. REDUCING ELBOW CONNECTOR: PM211004E 10mm x 4mm, PM211006E 10mm x 6mm, PM211008E 10mm x 8mm, PM211210E 12mm x 10mm. STEM ELBOW: PM221010E 10mm x 10mm, PM221515E 15mm x 15mm, PM222222E 22mm x 22mm. SWIVEL ELBOW BSP THREAD: PM091012E 10mm x ¼”, PM091013E 10mm x 3/8”, PM091014E 10mm x ½”. SWIVEL ELBOW BSPT THREAD: PM091002E 10mm x ¼”, PM091003E 10mm x 3/8”, PM091004E 10mm x ½”. EQUAL TEE: PM0210E 10MM, PM0215E 15mm, PM0222E 22mm. REDUCING TEE: PM3022AE 22mm x 22mm x 15mm. SWIVEL TEE CENTRE LEG BSP THREAD: PM101012E 10mm x ¼”, PM101013E 10mm x 3/8”, PM101014E 10mm x ½”. SWIVEL TEE CENTRE LEG BSPT THREAD: PM101002E 10mm x ¼“, PM101003E 10mm x 3/8“, PM101004E 10mm x ½“. SWIVEL MALE RUN TEE BSP THREAD: PM111012E 10mm x ¼”, PM111013E 10mm x 3/8”, PM111014E 10mm x ½”. SWIVEL MALE RUN TEE BSPT THREAD: PM111002E 10mm x ¼“, PM111003E 10mm x 3/8“, PM111004E 10mm x ½“. BULKHEAD CONNECTOR: PM1210E 10mm, REDUCER: PM061210E 12mm x 10mm, PM061510E 15mm x 10mm, PM061512E 15mm x 12mm, PM061815E 18mm x 15mm, PM062215E 22mm x 15mm, PM062218E 22mm x 18mm. STEM ADAPTOR BSP THREAD: PM051012E 10mm x ¼” BSP (M), PM051013E 10mm x 3/8” BSP (M), PM051014E 10mm x ½” BSP (M), PM051513E 15mm x 3/8” BSP (M), PM051514E 15mm x ½” BSP (M), PM052214E 22mm x ½” BSP (M), PM052216E 22mm x ¾ ” BSP (M). STEM ADAPTOR BSPT THREAD: PM051002E 10mm x ¼” BSPT (M), PM051003E 10mm x 3/8” BSPT (M), PM051004E 10mm x ½” BSPT (M). TWO WAY DIVIDER: PM2310E 10mm, PM2315E 15mm. PLUG (RED & BLACK): PM0810R 10MM RED, PM0815E 15MM BLACK, PM0822E 22MM BLACK. END STOP: PM4615E 15mm, PM4622E 22mm. FEMALES ADAPTOR BSP THREAD: PM451015FE 10mm x 5/8”. U-BEND: PMUB15E 15mm. BACK PLATE ELBOW: 15PWB 15mm x ½” BSP. WHITE ACETAL FITTINGS BULKHEAD ELBOW: CM551516W 15mm x ¾” BSP.
Manufacturer:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2304047

Range of in-line, pressure reducing valves with DZR brass bodies and stainless-steel strainers. Maximum inlet supply pressure 16.0 bar. Outlet supply pressure is adjustable within the range of 1.5 bar to 6.0 bar. Maximum operating temperature 45°C or 65°C, please refer to model.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2304047
Expiry date:
30/04/2028
Size:
½” or ¾” BSP female or male inlet and outlet. 15mm or 22mm compression fitting inlet and outlet for use with copper pipe to BS EN 1057:2006+A1:2010.
Marking:
Reliance Water Controls, DN, DR, flow arrow and pressure on body.
Installation Requirements:
R001
Model:
Cold water 312 Compact Series (operating temperature 45°C) comprising of models: PRED312020, PRED312025, PRED312001, PRED312005, PRED312010 & PRED312015. Hot water 312 Compact Series (operating temperature 65°C) comprising of models: PRED312070, PRED312071, PRED312075, PRED312076, PRED312050, PRED312055, PRED312060, PRED312061, PRED312065 & PRED312066.
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2304078

Range of tundishes with black plastic bodies. The products comply with the requirements of an air gap to drain.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0046 Backflow Prevention Devices
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2304078
Expiry date:
30/04/2028
Marking:
TUND219003, Syr & RWC logo on body TUND219005, Syr & RWC logo on body TUND219015, RWC, WRAS on body
Installation Requirements:
R001
Model:
TUND219003 ½” BSP (M) x 22mm compression TUND219005 15mm x 22mm compression TUND219015 22mm x 28mm compression
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2305038

“Heatguard Dual Thermostatic Mixing Valves”, range of T type thermostatic mixing valves with brushed chrome plated brass bodies. The inlets incorporate check valve cartridges (all models) and isolation valves (models HEAT110616 & HEAT110625 only). Check valve cartridges are verified by test (suitable for backflow protection against Fluid Category 2). Products also include stainless-steel strainers. Maximum working pressure 6 Bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2305038
Expiry date:
31/05/2028
Note:
For use with copper pipe manufactured to EN 1057.
Size:
See models.
Marking:
HEAT110614- Reliance water controls and heatguard dual on cap, batch code in format D= Day, WW= Week, YY= Year and LL= Production line and product code R HGD (R = RWC, HGD = Heatguard) on body. HEAT110624- Reliance Logo and heatguard dual on cap, batch code in format D= Day, WW= Week, YY= Year and LL= Production line and product code R HGD (R = RWC, HGD = Heatguard) on body. HEAT110625 - Reliance Logo and heatguard dual on cap, batch code in format D= Day, WW= Week, YY= Year and LL= Production line and product code R HGD (R = RWC, HGD = Heatguard) on body, flow arrow and CR on angle service valve. HEAT110616 - Reliance Worldwide Corporation Logo On Cap. CR and Flow Arrow on Service Valves.
Installation Requirements:
R001 R120 R040
Model:
HEAT110614- 15mm compression 2 in 1 union heatguard dual TMV, HEAT110624- 22mm compression 2 in 1 union heatguard dual TMV, HEAT110625 - 22mm compression 4 in 1 union heatguard dual TMV, HEAT110616 – 15mm compression 4 in 1 union heatguard dual TMV.
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2206060

Range of horizontal or vertical expansion vessels with an EPDM membrane. Maximum working pressure 10.0 or 16.0 bar (please refer to model). Maximum operating temperature 100°C.

Section:
1000 Expansion Vessels
WRAS Approval Number:
2206060
Expiry date:
30/06/2027
Size:
1” BSP (M), 1½” BSP (M) & 2” BSP (M).
Marking:
Zilio Industries Spa, AQUASYSTEM, model, max temp, max pressure CE and other technical information on label on body
Installation Requirements:
R001
Model:
XVES050070 35L VERT POT VESSEL WHITE PRE-SET 3.0 XVES050072 35L VERT POT VESSEL WHITE 2.2B XVES050075 35L VERT POT VES WHITE PRE 3BAR C/W BRK XVES050079 35L VERTICAL POT VESSEL 10BAR MAX 16. XVES050080 50L VERTICAL POT VESSEL BLUE PRE-SET 3.0 XVES050090 60L VERTICAL POT VESSEL BLUE PRE-SET 3.5 XVES050099 60L VERTICAL POT VESSEL 10BAR MAX 16 XVES050100 80L VERTICAL POT VESSEL BLUE PRE-SET 3.5 XVES050109 80L VERTICAL POT VESSEL 10BAR MAX 16 XVES050110 100L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050119 100L VERTICAL POT VESSEL 10BAR MAX 16 XVES050120 150L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050129 150L VERTICAL POT VESSEL 10BAR MAX 16 XVES050130 200L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050131 200L VERT POT VESSEL BLUE 2.1B XVES050139 200L VERTICAL POT VESSEL 10 BAR MAX 16 XVES050140 300L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050141 300L VERT POT VESSEL BLUE 2.1B XVES050149 300L VERTICAL POT VESSEL 10 BAR MAX 16 XVES050150 500L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050160 750L VERTICAL POT VESSEL RED PRE-SET 4.0 XVES050170 1000L VERTICAL POT VESSEL RED PRE-SET 4
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company
Manufacturer:
Zilio Industries SPA
Company Name
Zilio Industries SPA
Address
Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)
Phone
[+39] 049 59 57 552

View All Listings by this Company

Print This Approval


#2307023

Range of push-fit spherical valves with a brass body (15HSV model only) or chromium plated brass bodies (all other models), chromium plated brass ball and EPDM ‘O’- rings. SV suffix models are screwdriver operated; all other models are lever operated. For use with copper tube (manufactured to BS EN 1057), PB pipe (manufactured to BS7291-2) or PE-X pipe (manufactured to BS7291-3). Maximum working pressure and operating temperature: 12.5 @ 20°C, and 3.0 bar @ 92°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2307023
Expiry date:
31/07/2028
Size:
See model.
Marking:
John Guest logo (“JG”) (brand of Reliance Worldwide Corporation (UK) Ltd.) and size on collet.
Installation Requirements:
R001
Model:
10HSV: 10mm x 10mm pushfit. 10HSVP: 10mm x 10mm pushfit. 15HSV: 15mm x 15mm pushfit. 15HSVP: 15mm x 15mm pushfit. 22HSV: 22mm x 22mm pushfit. 22HSVP: 22mm x 22mm pushfit. 15PTSV: 15mm pushfit x ½” BSP captive nut. 15PTSVP: 15mm pushfit x ½” BSP captive nut. 10BV: 10mm x 10mm pushfit. 15BV: 15mm x 15mm pushfit. 15BV:P 15mm x 15mm pushfit. 22BV: 22mm x 22mm pushfit. 22BVP: 22mm x 22mm pushfit.
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2307024

Range of DZR brass push fit fittings for use with copper pipe (manufactured to BS EN 1057), PB pipe (manufactured to BS7291-2) and PEX pipe (manufactured to BS7291-3). Maximum working pressures and operating temperatures: 12.5 @ 20°C, and 3.0 bar @ 92ºC.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2307024
Expiry date:
31/07/2028
Size:
See model.
Marking:
John Guest logo (“JG”) (brand of Reliance Worldwide Corporation (UK) Ltd.) and CR on body.
Installation Requirements:
R001
Model:
Straight Adaptors: MW011504N: 15mm x ½” BSPT (M), MW012206N: 22mm x ¾” BSPT (M), MW012808N: 28mm x 1” BSPT (M), MW012818N: 28mm x 1” BSP (M). Male Couplers: 10MC(1/2): 10mm x ½” BSP (M), 15MC(1/2): 15mm x ½” BSP (M), 15MC(1/2)P: 15mm x ½” BSP (M), 22MC(3/4): 22mm x ¾” BSP (M), 22MC(3/4)P: 22mm x ¾” BSP (M). Female Adaptors: MW451514N: 15mm x ½” BSP (F), MW452216N: 22mm x ¾” BSP (F), 22CFA: 22mm x 1” BSP (F), 22CFAP: 22mm x 1” BSP (F). Back Plate Elbows: 15WB: 15mm x ½” BSP (F), 15WBP: 15mm x ½” BSP (F), 15WB2: 15mm x ½” BSP (F), 22WB: 22mm x ¾” BSP (F). Stem Adaptors: MW051504N: 15mm x ½” BSPT (M), MW052206N: 22mm x ¾” BSPT (M), MW052818N: 28mm x 1" BSP (M), MW501514N: 15mm x ½” BSP (F), MW502216N: 22mm x ¾” BSP (F). Male Adaptors: 22CMA: 22mm x 1” BSP (M), 22CMAP: 22mm x 1” BSP (M).
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2309042

Thermostatic blending valves (chromium plated DZR brass bodies) incorporating a thermostatic cartridge controlling the temperature. Inlets incorporate stainless steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2309042
Expiry date:
30/09/2028
Note:
For use with copper pipe manufactured to BS EN 1057.
Size:
15mm compression inlet and outlet.
Marking:
R HDG STYLE, DOM (D/WW/YY), CR and manufacturer’s logo on body of valve.
Installation Requirements:
R001 R010
Model:
HEAT135001
Factor:
Reliance Worldwide Corporation (Aust) Pty Ltd
Company Name
Reliance Worldwide Corporation (Aust) Pty Ltd
Address
55 Quantum Close Dandenong South Victoria

View All Listings by this Company
Manufacturer:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2009350

Range of gate valves with bronze bodies and bronze wedges. The valves operate via non-rising spindle head work with hand wheel or lock shield operating members. Maximum working pressure 20.0 bar. Maximum operating temperature 100°C

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2009350
Expiry date:
30/09/2025
Size:
½”, ¾”, 1”, 1 ¼”, 1 ½” & 2” BSP (F)
Marking:
VIR (manufacturers logo), made in Italy, CC491K (body material) PN20 and Size on body.
Installation Requirements:
R001
Model:
GATE110020: 1/2" FBSP BRONZE GATE VALVE (DN15) GATE110021: 3/4" FBSP BRONZE GATE VALVE (DN20) GATE110022: 1" FBSP BRONZE GATE VALVE (DN25) GATE110023: 1-1/4" FBSP BRONZE GATE VALVE (DN32) GATE110024: 1-1/2" FBSP BRONZE GATE VALVE (DN40) GATE110025: 2" FBSP BRONZE GATE VALVE (DN50)
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company
Manufacturer:
VIR Valvoindustria Ing. Rizzio S.p.A.
Company Name
VIR Valvoindustria Ing. Rizzio S.p.A.
Address
Via Circonvallazione n. 10, 13018 Valduggia (VC)

View All Listings by this Company

Print This Approval


#2305352

Range of manually operated balancing valves with either a DZR brass or bronze body incorporating a non-rising spindle balancing mechanism. Valves are adjusted using a handwheel. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:
2348 Valves
Section Subtitle:
Balancing.
WRAS Approval Number:
2305352
Expiry date:
31/05/2028
Size:
½” - 2” BSP (F).
Marking:
"R" Logo of Reliance on cap. DZR models are also marked CR. PN rating, size and flow arrow on body.
Installation Requirements:
R001
Model:
DBRV100001: 1/2" FBSP DZR BRASS BALANCING VALVE Max Flowrate 0.023l/s (DN15 X) DBRV100002: 1/2" FBSP DZR BRASS BALANCING VALVE Max Flowrate 0.045l/s (DN15 U) DBRV100003: 1/2" FBSP DZR BRASS BALANCING VALVE Max Flowrate 0.074l/s (DN15 L) DBRV100004: 1/2" FBSP DZR BRASS BALANCING VALVE Max Flowrate 0.148l/s) (DN15) DBRV100005: 3/4" FBSP DZR BRASS BALANCING VALVE Max Flowrate 0.325l/s (DN20) DBRV100006: 1" FBSP DZR BRASS BALANCING VALVE Max Flowrate 0.603l/s (DN25) DBRV100007: 1-1/4" FBSP DZR BRASS BALANCING VALVE Max Flowrate 1.250l/s (DN32) DBRV100008: 1-1/2" FBSP DZR BRASS BALANCING VALVE Max Flowrate 1.880l/s (DN40) DBRV100009: 2" FBSP DZR BRASS BALANCING VALVE Max Flowrate 3.510l/s (DN50) DBRV100010: 1/2" FBSP BRONZE BALANCING VALVE Max Flowrate 0.045l/s (DN15 U) DBRV100011: 1/2" FBSP BRONZE BALANCING VALVE Max Flowrate 0.074l/s (DN15 L) DBRV100012: 1/2" FBSP BRONZE BALANCING VALVE Max Flowrate 1.48l/s (DN15) DBRV100013: 3/4" FBSP BRONZE BALANCING VALVE Max Flowrate 0.325l/s (DN20) DBRV100014: 1" FBSP BRONZE BALANCING VALVE Max Flowrate 0.603l/s (DN25) DBRV100015: 1-1/4" FBSP BRONZE BALANCING VALVE Max Flowrate 1.25l/s (DN32) DBRV100016: 1-1/2" FBSP BRONZE BALANCING VALVE Max Flowrate 1.880l/s (DN40) DBRV100016: 1-1/2" FBSP BRONZE BALANCING VALVE Max Flowrate 1.880l/s (DN40)
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#1907419

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 100°C.

Section:
1715 Strainers
WRAS Approval Number:
1907419
Expiry date:
31/07/2024
Size:
½” - 2” BSP (F) x (F)
Marking:
VIR Valvoindustria Ing. Rizzio S.p.A logo (‘vir’ in a rectangle), flow arrow and PN20 on body.
Installation Requirements:
R001 R120
Model:
STRN110001: 1/2" FBSP BRONZE BODIED Y SHAPED STRAINER (DN15) STRN110002: 3/4" FBSP BRONZE BODIED Y SHAPED STRAINER (DN20) STRN110003: 1" FBSP BRONZE BODIED Y SHAPED STRAINER (DN25) STRN110004: 1-1/4" FBSP BRONZE BODIED Y SHAPED STRAINER (DN32) STRN110005: 1-1/2" FBSP BRONZE BODIED Y SHAPED STRAINER (DN40) STRN110006: 2" FBSP BRONZE BODIED Y SHAPED STRAINER (DN50)
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company
Manufacturer:
VIR Valvoindustria Ing. Rizzio S.p.A.
Company Name
VIR Valvoindustria Ing. Rizzio S.p.A.
Address
Via Circonvallazione n. 10, 13018 Valduggia (VC)

View All Listings by this Company

Print This Approval


#1909435

Range of stainless-steel braided EPDM lined flexible hoses. Maximum working pressure and operating temperature 12.0 bar @ 20°C, 6.0 bar @ 65°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
1909435
Expiry date:
30/09/2024
Note:
Size:
See model
Marking:
Qualflex, QWRAS, date of manufacture (month code and year YY) and operating parameters on ferrule. Models added January 2022: Qualflex, QWRAS and year of manufacture (YY) on ferrule.
Installation Requirements:
R001 R008
Model:
HOSE900001: DN10 x Brass 3/4BSP Female Elbow x Brass 1/2BSP Female straight. HOSE202105: DN10 x Brass 3/4BPP Female Straight x Brass 3/4BSP Male HOSE900004: DN10 x Brass 3/8BSP Female Elbow x Brass 1/2BSP Female straight HOSE202107: DN10 x Brass 3/4BSP Female Elbow x Brass 3/4BSP Female straight. HOSE300001 : DN10 x Brass 3/4BSP Female Elbow x Brass 1/2BSP Female straight.
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company
Manufacturer:
Hydralectric Ltd.
Company Name
Hydralectric Ltd.
Address
5 High Road Byfleet Surrey
Postcode
KT14 7QE
Phone
+44 1932 334 200

View All Listings by this Company

Print This Approval


#2310020

Range of JG Twist & Lock Speedfit push-fit fittings for use with JG Speedfit Layflat Polybutylene Barrier Pipe (BPB Pipe to BS EN 7291-2:2010), 'BPEX' Barrier Pipe.(BPEX Pipe to BS EN 7291-3:2010) and Copper Pipe to BS EN1057:2006 Max working pressure & operating temperature: 12.5 Bar at 20°C 6.0 Bar at 83°C

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2310020
Expiry date:
31/10/2028
Size:
See models, note all sizes listed in mm are push-fit, all other size types are listed in the models themselves. Models for use with copper pipe are sized up to and including 22mm and no larger.
Marking:
Fittings: JG Logo & Size on collet. Manifolds: JG Logo & Size on Collet. JG Logo on Body. Pipe: JG Speedfit, operating parameters & other technical information on pipe.
Installation Requirements:
R001 R008
Model:
EQUAL STRAIGHT CONNECTOR PEM0410W, 10mm EQUAL STRAIGHT CONNECTOR PEM0415W, 15mm EQUAL STRAIGHT CONNECTOR PEM0422W, 22mm EQUAL STRAIGHT CONNECTOR PEM0428W, 28mm EQUAL STRAIGHT CONNECTOR REDUCING STRAIGHT CONNECTOR PEM201510W, 15mm x 10mm REDUCING STRAIGHT CONNECTOR PEM202215W, 22mm x 15mm REDUCING STRAIGHT CONNECTOR REDUCER PEM061510W, 15mm x 10mm REDUCER PEM062215W, 22mm x 15mm REDUCER PEM062815W, 28mm x 15mm REDUCER PEM062822W, 28mm x 22mm REDUCER, EQUAL ELBOW PEM0310W, 10mm EQUAL ELBOW, PEM0315W, 15mm EQUAL ELBOW, PEM0322W, 22mm EQUAL ELBOW, PEM0328W, 28mm EQUAL ELBOW, REDUCING ELBOW PEM211510W, 15mm x10mm REDUCING ELBOW PEM212215W, 22mm x15mm REDUCING ELBOW STEM ELBOW PEM571515W, 15mm 135° STEM ELBOW, PEM572222W, 22mm 135° STEM ELBOW, STEM ELBOW PEM221010W, 10mm x 10mm STEM ELBOW PEM221015W, 10mm x 15mm STEM ELBOW PEM221515W, 15mm x 15mm STEM ELBOW PEM222222W, 22mm x 22mm STEM ELBOW EQUAL TEE PEM0210W, 10mm EQUAL TEE PEM0215W, 15mm EQUAL TEE PEM0222W, 22mm EQUAL TEE PEM0228W, 28mm EQUAL TEE REDUCING TEE PEM3015BW, 15mm x 10mm x 10mm REDUCING TEE PEM3015AW, 15mm x 15mm x 10mm REDUCING TEE PEM3022CW, 15mm x 15mm x 22mm REDUCING TEE PEM3022BW, 22mm x 15mm x 15mm REDUCING TEE PEM3022DW, 22mm x 15mm x 22mm REDUCING TEE PEM302210AW, 22mm x 22mm x 10mm REDUCING TEE PEM3022AW, 22mm x 22mm x 15mm REDUCING TEE PEM3028BW, 28mm x 22mm x 22mm REDUCING TEE PEM3028DW, 28mm x 22mm x 28mm REDUCING TEE PEM302810AW, 28mm x 28mm x 10mm REDUCING TEE PEM302815AW, 28mm x 28mm x 15mm REDUCING TEE PEM3028AW, 28mm x 28mm x 22mm REDUCING TEE STEM TEE PEM532210W, 22mm x 22mm x 10mm STEM TEE PEM532215W, 22mm x 22mm x 15mm STEM TEE STRAIGHT TAP CONNECTOR, PEMSTC1014, 10mm x 1/2" BSP Captive Nut STRAIGHT TAP CONNECTOR PEMSTC1514, 15mm x 1/2" BSP Captive Nut STRAIGHT TAP CONNECTOR PEMSTC1516, 15mm x 3/4" BSP Captive Nut STRAIGHT TAP CONNECTOR PEMSTC2216, 22mm x 3/4" BSP Captive Nut STRAIGHT TAP CONNECTOR BENT TAP CONNECTOR PEMBTC1014, 10mm x 1/2" BSP Captive Nut BENT TAP CONNECTOR PEMBTC1514, 15mm x 1/2" BSP Captive Nut BENT TAP CONNECTOR
PIPE REPAIR KIT, 15RKP, 15mm PIPE REPAIR KIT 22RKP, 22mm PIPE REPAIR KIT SLIP TEE CONNECTOR 15TKP, 15mm SLIP TEE CONNECTOR 22TKP, 22mm SLIP TEE CONNECTOR, PLUG PL10, 10mm PLUG, PL15, 15mm PLUG, PL22, 22mm PLUG, PL28, 28mm PLUG, PIPE INSERTS TSM10N, 10mm PIPE INSERTS TSM15N, 15mm PIPE INSERTS TSM22N, 22mm PIPE INSERTS TSM28N, 28mm PIPE INSERTS SUPERSEAL PIPE INSERTS STS10, 10mm SUPERSEAL PIPE INSERTS STS15, 15mm SUPERSEAL PIPE INSERTS STS22, 22mm SUPERSEAL PIPE INSERTS STS28, 28mm SUPERSEAL PIPE INSERTS LAYFLAT POLYBUTYLENE BARRIER PIPE (COILS) 10BPB-25C, 10mm x 25M LAYFLAT POLYBUTYLENE BARRIER PIPE 10BPB-50C, 10mm x 50M LAYFLAT POLYBUTYLENE BARRIER PIPE 10BPB-100C, 10mm x 100M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-25C, 15mm x 25M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-50C, 15mm x 50M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-85C, 15mm x 85M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-100C, 15mm x 100M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-120C, 15mm x 120M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-150C, 15mm x 150M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-300C, 15mm x 300M LAYFLAT POLYBUTYLENE BARRIER PIPE 22BPB-25C 22mm x 25M LAYFLAT POLYBUTYLENE BARRIER PIPE 22BPB-50C 22mm x 50M LAYFLAT POLYBUTYLENE BARRIER PIPE 28BPB-50C, 28mm x 50M LAYFLAT POLYBUTYLENE BARRIER PIPE WHITE PEX BARRIER PIPE (COILS & LENGTHS) 10BPEX-25C, 10mm x 25M WHITE PEX BARRIER PIPE 10BPEX-50C, 10mm x 50M WHITE PEX BARRIER PIPE 10BPEX-100C, 10mm x 100M WHITE PEX BARRIER PIPE 15BPEX-25C, 15mm x 25M WHITE PEX BARRIER PIPE 15BPEX-50C, 15mm x 50M WHITE PEX BARRIER PIPE 15BPEX-100C, 15mm x 100M WHITE PEX BARRIER PIPE 15BPEX-120C, 15mm x 120M WHITE PEX BARRIER PIPE 15BPEX-150C, 15mm x 150M WHITE PEX BARRIER PIPE 22BPEX-25C, 22mm x 25M WHITE PEX BARRIER PIPE 22BPEX-50C, 22mm x 50M WHITE PEX BARRIER PIPE 15BPEX-20X2L, 15mm x 2M LENGTHS WHITE PEX BARRIER PIPE 15BPEX-20X3L, 15mm x 3M LENGTHS WHITE PEX BARRIER PIPE 15BPEX-20X6L, 15mm x 6M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X2L, 22mm x 2M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X3L, 22mm x 3M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X6L, 22mm x 6M LENGTHS WHITE PEX BARRIER PIPE 28BPEX-10X3L, 28mm x 3M LENGTHS WHITE PEX BARRIER PIPE 28BPEX-10X6L, 28mm x 6M LENGTHS WHITE PEX BARRIER PIPE Manifolds: PEM522210W 22MM X 10MM 4 PORT MANIFOLD PEM522210WP 22MM X 10MM 4 PORT MANIFOLD PEM522215W 22MM X 15MM 4 PORT MANIFOLD PEM522215WP 22MM X 15MM 4 PORT MANIFOLD PEM582210AW 22MM X 10MM 2 PORT MANIFOLD W/ STEM PEM582210AWP 22MM X 10MM 2 PORT MANIFOLD W/ STEM PEM582215AW 22MM X 15MM 2 PORT MANIFOLD W/ STEM PEM582215AWP 22MM X 15MM 2 PORT MANIFOLD W/ STEM PEM582215BW 22MM X 15MM 3 PORT MANIFOLD W/ STEM PEM582215BWP 22MM X 15MM 3 PORT MANIFOLD W/ STEM PEM582215CW 22MM X 15MM 4 PORT MANIFOLD W/ STEM PEM582215CWP 22MM X 15MM 4 PORT MANIFOLD W/ STEM
Manufacturer:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2311011

Range of pressure reducing valve assemblies with DZR brass bodies incorporating a spherical valve, a pressure gauge and 2 inline check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). Models TVAP250001 & TVAP250005 also incorporate a water meter port. Maximum supply pressure 16 bar. Outlet pressure setting is adjustable in the range 1.5 to 6 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2311011
Expiry date:
30/11/2028
Size:
See model
Marking:
Reliance logo, flow arrow, size, PN & DR cast into body. Pressure, temperature and reliance on body of PRV.
Installation Requirements:
R001
Model:
TVAP250001 3/4” TENANT VALVE ADVANCE, TVAP250005 1” TENANT VALVE ADVANCE, TVAP250050 3/4” TENANT VALVE COMPACT TVAP250055 1” TENANT VALVE COMPACT
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2310701

Range of push fit shut off valves with plastic bodies incorporating EPDM ‘O’ rings and seals, for PE-X pipe (manufactured to BS7291-3), PB pipe (manufactured to BS7291-2) and copper pipe (manufactured to BS EN1057) Maximum working pressure/temperature: 12.5 Bar at 20°C and 6.0 Bar at 65°C.

Section:
2270 Valves
Section Subtitle:
Spherical, plastic.
WRAS Approval Number:
2310701
Expiry date:
31/10/2028
Size:
15APT & 15APT2 models: 15mm push-fit inlet to ¾” BSP (M) outlet. 15ESOT model 15mm push-fit inlet and outlet
Marking:
JG logo (brand of Reliance Worldwide Corporation (UK) Ltd.) on body and operating member. Flow arrow, size and maximum temperature on body
Installation Requirements:
R001
Model:
15APT: 15mm X ¾” BSP Appliance tap 15APT2: 15mm x 15mm x ¾” BSP appliance tap 15ESOT: 15mm X 15mm Emergency shut off tap
Manufacturer:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2309023

Range of screw down stop valves with plastic bodies incorporating EPDM ‘O’-rings and seal. For use with PE-X pipe (manufactured to BS7291-3), BPB pipe (manufactured to BS7291-2) and copper pipe (manufactured to EN1057). Maximum working pressure and operating temperatures: 12.5 bar @ 20°C & 6.0 bar @ 65°C.

Section:
2336 Valves
Section Subtitle:
Stop - plastic.
WRAS Approval Number:
2309023
Expiry date:
30/09/2028
Size:
See models
Marking:
JG logo (brand of Reliance Worldwide Corporation (UK) Ltd.) on body and operating member. Flow arrow, size and maximum temperature on body.
Installation Requirements:
R001 R008
Model:
Model: 15STV/2: 15mm push-fit inlet/outlet, 22STV/2: 22mm push-fit inlet/outlet.
Manufacturer:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2311012

Range of combined isolation and drain off valves with brass bodies and EPDM O-rings. Maximum working pressure 16 Bar Maximum operating temperature 65°C

Non-metallic materials and components comply with BS6920 at 65°C

Section:
4001 Components and accessories
Section Subtitle:
Water meters.
WRAS Approval Number:
2311012
Expiry date:
30/11/2028
Note:
Above ground use only.
Size:
See models.
Marking:
Reliance logo, flow arrow, size, DR and flow arrow on body
Installation Requirements:
R001 R511
Model:
TABV250001 3/4” TVA ISOLATOR & DRAIN OFF TABV250005 1” TVA ISOLATOR & DRAIN OFF
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.