Approvals


#1905393

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1905393
Expiry date:
31/05/2024
Size:
¾” BSP(M)
Marking:
CROSSWATER LOGO "X" ON SIDE OF TAP BASE
Installation Requirements:
R001 R006 R010
Model:
MYBF2THC

Print This Approval


#1907312

Shower kit comprising of shower handset (chrome plated brass body), shower hose and 90° wall elbow. The inlet to the shower handset incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1907312
Expiry date:
31/07/2024
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Crosswater 'X' logo on shower handset
Installation Requirements:
R001 R040
Model:
UB963x Where x denotes finish and can be replaced by: C - Chrome V - stainless steel F - brushed brass M - matt black A - anthracite W - white B - brushed black chrome N - polished nickel L - brushed nickel Q - unlacquered brass RG - rose gold BGR - brushed rose gold P - copper

Print This Approval


#1907327

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907327
Expiry date:
31/07/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Crosswater ‘X’ logo on body
Installation Requirements:
R001 R006 R010
Model:
PRO110DNC – MPRO (Chrome finish) Model added September 2021: PRO110DNUB - MPRO (Unlacquered brass)
Manufacturer:
A.G.Monteiro.
Company Name
A.G.Monteiro.
Address
Parque Industrial de Adaufe Lote H5A e H5B 4710-571 Braga

View All Listings by this Company

Print This Approval


#1909388

Range of shower heads having brass bodies (in various finishes) Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
1909388
Expiry date:
30/09/2024
Note:
Open outlet use only
Size:
½” BSP(F)
Marking:
Crosswater logo (X) on body
Installation Requirements:
R001 R040
Model:
PRO200X PRO220X PRO300X PRO330X Where x denotes finish and can be replaced by: C - Chrome V - stainless steel F - brushed brass M - matt black A - anthracite W - white B - brushed black chrome N - polished nickel L - brushed nickel Q - unlacquered brass RG - rose gold BGR - brushed rose gold P – copper UB – Unlaquered brushed brass

Print This Approval


#1910353

Range of thermostatic mixing valves having brass bodies and either 1 way, 2 way or 3 way optional outlets depending on model controlled by a cermic disc diverter. The temperature is controlled independently via a thermostatic cartridge having various operating member and facia plate options. To be installed with the universal built in box Crossbox (which is not approved in its own right) Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1910353
Expiry date:
31/10/2024
Size:
½” BSP (F)
Marking:
CROSSWATER LOGO ON FRONT OF FACE PLATE
Installation Requirements:
R001 R040 R010
Model:
CROSSBOX Built-in Universal Box ATCB1000LBPX & MVCB1000LBPX Thermostatic Mixer Soft Square 1 way PROCB1000LBPX Thermostatic Mixer MPro 1 way ATCB1500LBPX & MVCB1500LBPX Thermostatic Mixer Soft Square 2 ways PROCB1500LBPX & PROCB1510LBPX Thermostatic Mixer MPro 2 ways MVCB2500LBPX Thermostatic Mixer Soft Square 3 ways PROCB2500LBPX Thermostatic Mixer MPro 3 ways Where ‘X’ denotes finish C = Chrome V = Stainless steel effect F = Brushed brass M = Matt Black A = Anthracite W = White B = Brushed Black Chrome N = Polished Nickel L = Brushed Nickel Q = Unlacquered Brass RG = Rose Gold BRG = Brushed Rose Gold P = Copper R = Polished Brass UB = Unlacquered Brushed Brass

Print This Approval


#1912056

Shower handset with plastic body (black coloured finish). Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1912056
Expiry date:
31/12/2024
Note:
Open outlet use only
Marking:
CROSSWATER LOGO ON BASE OF HANDSET
Installation Requirements:
R001 R040
Model:
SH230M

Print This Approval


#2001353

Range of spout outlets with brass bodies (chrome plated or unlacquered brass), incorporating a plastic aerator and NBR ‘O’-rings. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2001353
Expiry date:
31/01/2025
Note:
Open outlet use only.
Size:
¾” BSP (M)
Marking:
Crosswater logo on body of spout
Installation Requirements:
R001 R040
Model:
PRI037WC (chrome plated) PRI037WUB (unlaquered brass
Manufacturer:
A.G.Monteiro.
Company Name
A.G.Monteiro.
Address
Parque Industrial de Adaufe Lote H5A e H5B 4710-571 Braga

View All Listings by this Company

Print This Approval


#1909425

Range of combined bath filler, waste and overflow assemblies in various finishes. Maximum operating temperature 60ºC.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
1909425
Expiry date:
30/09/2024
Note:
Open outlet use only.
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Crosswater logo on body
Installation Requirements:
R001 R090 R160
Model:
BFW0168x & BFW0169x combined bath filler ‘X’ denotes finish and is replaced with. C- chrome RG-Rose gold W-White M-Matt Black L-Brushed nickel V-Stainless Steel F-Brushed Brass P-Copper BGR-Brushed Rose Gold Q-Unlaquered Brass N-Polished Nickel B-Brushed Black Chrome A-Anthracite

Print This Approval


#2012102

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012102
Expiry date:
31/12/2025
Size:
½” BSP (M)
Marking:
"X" CROSSWATER LOGO & MODEL ON CISTERN BODY
Installation Requirements:
R001 R556
Model:
WCF118X50-VS+2 WC CONCEALED DUAL FLUSHING CISTERN FRAME INCLUDED WCC57X46+2 WC CONCEALED DUAL FLUSHING CISTERN NO FRAME CISTERN FLUSHING

Print This Approval


#2012103

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012103
Expiry date:
31/12/2025
Size:
½” BSP (M)
Marking:
"X" CROSSWATER LOGO & model number on cistern body.
Installation Requirements:
R001 R556
Model:
WCF82X50+2 WC concealed dual flushing cistern Frame included WCF98X50+2 WC concealed dual flushing cistern Frame included WCC47X46+2 WC concealed dual flushing cistern No frame

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.