Wolseley UK Ltd. Approvals


WRAS Approval Number: 1701709

Range of copper end feed fittings for use with copper pipe. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

  • Section: 1210 Fittings for use with Tube and Pipe
  • Section Subtitle: End feed, for use with copper tube.
  • WRAS Approval Number: 1701709
  • Expiry date: 31/01/2022
  • Marking: CB and size on body.
  • Installation Requirements R001
  • Model
    Center Brand range consisting of: N1 STRAIGHT COUPLING: 6mm to 54mm N1IM ADAPTOR COUPLING: 15mm x ½” to 28mm x 1” N1R REDUCING COUPLING: 8mm x 6mm to 54mm x 42mm N1SLIP STRAIGHT COUPLING SLIP: 12mm to 54mm N2 STRAIGHT FEMALE CONNECTOR: 10mm x 3/8" to 54mm x 2” N3 STRAIGHT MALE CONNECTOR: 10mm x 3/8" to 54mm x 2” N5 TANK CONNECTOR: 15mm x ½” to 28mm x 1” N6 REDUCER: 8mm x 6mm to 54mm x 42mm N7 FEMALE ADAPTOR: 15mm x ½” to 54mm x 2” N8 MALE ADAPTOR: 15mm x ½” to 54mm x 2” N9 ADAPTOR: ½” x 15mm to ¾” x 22mm N11 UNION COUPLING CONE FACE: 15mm to 54mm N12 ELBOW: 6mm to 54mm N12R REDUCING ELBOW: 22mm x 15mm to 22mm x 18mm N12S STREET ELBOW: 8mm to 54mm N13 MALE ELBOW: 12mm x 3/8” to 54mm x 2” N14 FEMALE ELBOW: 15mm x ½” to 54mm x 2” N15 BACKPLATE ELBOW: 15mm x ½” to 22mm x ¾” N15F BACKPLATE ELBOW: 12mm x ½” to 18mm x ¾” N18 SLOW BEND: 6mm to 54mm N18S SLOW STREET BEND: 12mm to 54mm N20 RETURN BEND: 12mm to 35mm N21 OBTUSE ELBOW 45°: 12mm to 54mm N21S OBTUSE STREET ELBOW 45°: 10mm to 54mm N22 PARTIAL CROSSOVER: 12mm to 22mm N23 FULL CROSSOVER: 12mm to 22mm N24 EQUAL TEE: 6mm to 54mm N25 TEE REDUCED BRANCH: 10mm x 10mm x 6mm to 54mm x 54mm x 42mm N26 TEE ONE END REDUCED: 12mm x 10mm x 12mm to 54mm x 42mm x 54mm N27 TEE ONE END AND BRANCH REDUCED: 12mm x 10mm x 10mm to 54mm x 42mm x 42mm N28 TEE BOTH ENDS REDUCED: 12mm x 12mm x 15mm to 35mm x 35mm x 42mm N29 FEMALE TEE: 15mm x ½” x 15mm to 22mm x ¾” x 22mm N29R FEMALE TEE: 22mm x ½” x 22mm to 28mm x ½” x 28mm N30 FEMALE TEE: 15mm x 15mm x ½” to 28mm x 28mm x 1” N30R FEMALE TEE: 22mm x 22mm x ½” to 35mm x 35mm x ½” N50 CROSS: 15mm to 28mm N61: 8mm to 54mm N61AV STOP END: 15mm N62 STRAIGHT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N63 BENT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N64 BENT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N64M ADAPTOR: 22mm x ¾” N65 BENT MALE UNION CONNECTOR: 15mm x ½” to 35mm x 1¼” N68 STRAIGHT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N68FF FLAT FACED UNION ADAPTOR: 22mm x ¾” N68 METER UNION: 22mm x ¾” N69 STRAIGHT MALE UNION CONNECTOR: 15mm x ½” to 54mm x 2” N69F UNION COUPLING: 15mm x ½” to 28mm x 1”
  • Factor: Wolseley UK Ltd.
    Company Name
    Wolseley UK Ltd.
    Address
    Harrison Way, Spa Park, Royal Leamington Spa
    Postcode
    CV31 3HH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1704389

Range of screw down stop valves with brass bodies and bonnets and EPDM sealing washer. Maximum working pressure 20.0 bar. Cold water use only.

  • Section: 2310 Valves
  • Section Subtitle: Stop, metal, screw down.
  • WRAS Approval Number: 1704389
  • Expiry date: 30/04/2022
  • Marking: Jet (Brand of Wolseley), flow arrow & size on body
  • Installation Requirements R001
  • Model
    Jet Range: BSP Female Threaded Stopcock: K74385 (½”), K74386 (¾”), K74387 (1”), K74388 (1¼”), K74389 (1½”) & K74390 (2”). Compression stopcock: K74391 (15mm), K74392 (22mm), K74393 (28mm), K74394 (35mm), K74395 (42mm) & K74396 (54mm).
  • Factor: Wolseley UK Ltd.
    Company Name
    Wolseley UK Ltd.
    Address
    Harrison Way, Spa Park, Royal Leamington Spa
    Postcode
    CV31 3HH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1703384

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with cross top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1703384
  • Expiry date: 31/03/2022
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: Nabis (brand of Wolseley) on body
  • Installation Requirements R001 R006 R010
  • Model
    A05433
  • Factor: Wolseley UK Ltd.
    Company Name
    Wolseley UK Ltd.
    Address
    Harrison Way, Spa Park, Royal Leamington Spa
    Postcode
    CV31 3HH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1703385

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating quarter turn ceramic disc headwork. Models A05404 & A05410 have single lever operating members. Models A05434 & A05432 have cross top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1703385
  • Expiry date: 31/03/2022
  • Size: ½” BSP (M).
  • Marking: Nabis (brand of Wolseley) on body
  • Installation Requirements R001 R006 R010
  • Model
    A05404, A05410, A05434 & A05432
  • Factor: Wolseley UK Ltd.
    Company Name
    Wolseley UK Ltd.
    Address
    Harrison Way, Spa Park, Royal Leamington Spa
    Postcode
    CV31 3HH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702373

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headworks and single lever operating members. The spout outlets each incorporate an aerator, with the exception of models A05414 & A05415 Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1702373
  • Expiry date: 28/02/2022
  • Size: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
  • Marking: Nabis (brand of Wolseley) on body
  • Installation Requirements R001 R006 R010
  • Model
    A05401, A05406, A05408, A05409, A05414, A05415, A05418, A05421, A05422, A05425 & A05426
  • Factor: Wolseley UK Ltd.
    Company Name
    Wolseley UK Ltd.
    Address
    Harrison Way, Spa Park, Royal Leamington Spa
    Postcode
    CV31 3HH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705086

Range of single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a quarter turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705086
  • Expiry date: 31/05/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: Nabis on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    SANDIA MONOBLO KITCHEN TAP B08914
  • Factor: Wolseley UK Ltd.
    Company Name
    Wolseley UK Ltd.
    Address
    Harrison Way, Spa Park, Royal Leamington Spa
    Postcode
    CV31 3HH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705087

Range of single hole, single outlet (swivel) combination tap assembly. Incorporating cross top operating members. The inlets incorporate a stainless steel strainer. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705087
  • Expiry date: 31/05/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
  • Marking: Nabis (brand of Wolseley) on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    REGAL CROSSHEAD KITCHEN TAP B08912
  • Factor: Wolseley UK Ltd.
    Company Name
    Wolseley UK Ltd.
    Address
    Harrison Way, Spa Park, Royal Leamington Spa
    Postcode
    CV31 3HH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705088

Range of single hole, single outlet (swivel) combination tap assembly. Incorporating a non-rising spindle headworks and dome type. The inlets incorporate a stainless steel strainer. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705088
  • Expiry date: 31/05/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
  • Marking: Nabis (brand of Wolseley) on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    TURANO MONOBLOC KICHEN TAP B08911
  • Factor: Wolseley UK Ltd.
    Company Name
    Wolseley UK Ltd.
    Address
    Harrison Way, Spa Park, Royal Leamington Spa
    Postcode
    CV31 3HH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712084

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass body), incorporating two none rising spindle headworks and a dome type operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1712084
  • Expiry date: 31/12/2022
  • Size: Stainless steel braided EPDM lined hose assembly incorporating ½” BSP captive nut
  • Marking: Swan (brand of Wolseley) logo on operating member.
  • Installation Requirements R001 R006 R010
  • Model
    Mercia C48107 STANDARD DC Mono Sink Mixer CP.
  • Factor: Wolseley UK Ltd.
    Company Name
    Wolseley UK Ltd.
    Address
    Harrison Way, Spa Park, Royal Leamington Spa
    Postcode
    CV31 3HH
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711101

Range of single hole, metal single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ¼ turn ceramic disc headworks and single lever operating members. Spout outlets incorporate either a plastic aerator (901407 model) or plastic flow straightener (all other models). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711101
  • Expiry date: 30/11/2022
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: B08918 - Nabis on operating member. B0925 - Nabis on body.
  • Installation Requirements R001 R006 R010
  • Model
    Morita monoblanc kitchen tap B08918 Sevier monobloc kitchen tap B08925
  • Factor: Wolseley UK Ltd.
    Company Name
    Wolseley UK Ltd.
    Address
    Harrison Way, Spa Park, Royal Leamington Spa
    Postcode
    CV31 3HH
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 3