Ideal Standard (UK) Ltd. Hull Approvals


WRAS Approval Number: 1610051

Wall mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1610051
  • Expiry date: 31/10/2021
  • Note: This approval does not include a shower hose and handset.
  • Size: ¾” x ½” BSP offset unions.
  • Marking: ‘Ideal Standard’ located on the operating member.
  • Installation Requirements R001 R030
  • Model
    Tesi range: A6583AA
  • Factor: Ideal Standard (UK) Ltd. Hull
    Company Name
    Ideal Standard (UK) Ltd. Hull
    Address
    National Avenue, Hull
    Postcode
    HU5 4HS
    View All Listings by this Company
  • Manufacturer: Ideal Standard Produktions - GmbH
    Company Name
    Ideal Standard Produktions - GmbH
    Address
    EUSKIRCHENER STRASSE 80 53121 BONN GERMANY
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1610049

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is also supplied with an optional plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1610049
  • Expiry date: 31/10/2021
  • Size: Stainless steel braided PEX lined flexible hose assemblies with 15mm compression inlets.
  • Marking: Ideal Standard Logo on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    B0382AA Concept Blue
  • Factor: Ideal Standard (UK) Ltd. Hull
    Company Name
    Ideal Standard (UK) Ltd. Hull
    Address
    National Avenue, Hull
    Postcode
    HU5 4HS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611025

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1611025
  • Expiry date: 30/11/2021
  • Size: Stainless steel braided PEX lined flexible hose assemblies with 3/8” captive nut end connections
  • Marking: Ideal Standard logo on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    B8084AA - Active Single Lever Kitchen Mixer - High Spout.
  • Factor: Ideal Standard (UK) Ltd. Hull
    Company Name
    Ideal Standard (UK) Ltd. Hull
    Address
    National Avenue, Hull
    Postcode
    HU5 4HS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1611052

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self- cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset. The outlet to the shower hose incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). The shower handset incorporates a flow regulator on the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1611052
  • Expiry date: 30/11/2021
  • Size: 15mm copper tails.
  • Marking: Ideal Standard logo on operating member.
  • Installation Requirements R001 R006 R030
  • Model
    B7890AA Ceraplan
  • Factor: Ideal Standard (UK) Ltd. Hull
    Company Name
    Ideal Standard (UK) Ltd. Hull
    Address
    National Avenue, Hull
    Postcode
    HU5 4HS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702010

Range of wall mounted, exposed bar type thermostatic shower valves (chromium plated brass) incorporating a half turn ceramic disc headwork controlling the flow with dome operating member. Temperature is controlled independently via a thermostatic cartridge with dome operating members incorporating a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) and a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1702010
  • Expiry date: 28/02/2022
  • Size: 15mm compression inlets
  • Marking: Ideal Standard logo on operating member
  • Installation Requirements R001 R040
  • Model
    A4740AA Alto Ecotherm & A5637AA Alto Ecotherm
  • Factor: Ideal Standard (UK) Ltd. Hull
    Company Name
    Ideal Standard (UK) Ltd. Hull
    Address
    National Avenue, Hull
    Postcode
    HU5 4HS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1702008

Deck mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a quarter turn ceramic disc headwork with a dome type operating member and self-cancelling diverter to shower outlet. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. Both inlets incorporate a single check valve cartridge (suitable for backflow protection against Fluid Category 2) The spout outlet incorporates a plastic flow straightener. The shower handset incorporates a plastic flow regulator at the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1702008
  • Expiry date: 28/02/2022
  • Size: ¾” BSP male
  • Marking: Ideal standard on operating member
  • Installation Requirements R001 R005 R010 R030
  • Model
    A4054AA Active
  • Factor: Ideal Standard (UK) Ltd. Hull
    Company Name
    Ideal Standard (UK) Ltd. Hull
    Address
    National Avenue, Hull
    Postcode
    HU5 4HS
    View All Listings by this Company
  • Manufacturer: Ideal Standard Produktions - GmbH
    Company Name
    Ideal Standard Produktions - GmbH
    Address
    EUSKIRCHENER STRASSE 80 53121 BONN GERMANY
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1703005

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with an optional flow straightener. Models B9135AA & B8261AA are supplied with a pop-up waste. Models B8261AA, B8260AA & B8270AA incorporates a tamper proof outlet. Model B0271AA is also supplied with a weighted chain. Maximum working pressure 10.0 Bar. Maximum operating temperature: 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1703005
  • Expiry date: 31/03/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with 15mm compression end connections, except for B8270AA model which has 10mm copper inlet tails.
  • Marking: Armitage Shanks logo on operating member
  • Installation Requirements R001 R006 R010
  • Model
    B9135AA – Armitage Shanks Piccolo 21, B8261AA – Armitage Shanks Piccolo 21, B8260AA – Armitage Shanks Piccolo 21, B0270AA – Armitage Shanks Piccolo 21 & B0271AA – Armitage Shanks Piccolo 21 Basin.
  • Factor: Ideal Standard (UK) Ltd. Hull
    Company Name
    Ideal Standard (UK) Ltd. Hull
    Address
    National Avenue, Hull
    Postcode
    HU5 4HS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712701

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator with integral flow regulator. The product is also supplied with an optional plastic flow straightener. Model B9915AA is supplied with pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1712701
  • Expiry date: 31/12/2022
  • Note: No testing performed on pop-up waste
  • Size: Stainless steel braided PEX lined flexible hose assemblies with 15mm compression end connections.
  • Marking: Ideal Standard logo on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    B9915AA & B9918AA Concept Blue
  • Factor: Ideal Standard (UK) Ltd. Hull
    Company Name
    Ideal Standard (UK) Ltd. Hull
    Address
    National Avenue, Hull
    Postcode
    HU5 4HS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705014

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic aerator. The product is also supplied with an optional plastic flow straightener. The B0671AA model is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705014
  • Expiry date: 31/05/2022
  • Note: No testing performed on pop up waste.
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating 15mm compression end connections.
  • Marking: Ideal Standard logo on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    B0671AA Concept Blue & B0672AA Concept Blue.
  • Factor: Ideal Standard (UK) Ltd. Hull
    Company Name
    Ideal Standard (UK) Ltd. Hull
    Address
    National Avenue, Hull
    Postcode
    HU5 4HS
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802062

Combined bath filler and overflow waste assembly incorporating a manual operated pop-up waste using a dome type operating member. The outlet incorporates a plastic flow straightener. The inlet incorporates a single check valve cartridge (suitable for backflow protection against fluid category 2). Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 1535 Miscellaneous
  • Section Subtitle: Tap accessories.
  • WRAS Approval Number: 1802062
  • Expiry date: 28/02/2023
  • Size: ½” BSP (M)
  • Marking: ISI on side of operating member
  • Installation Requirements R001 R160
  • Proviso: For domestic use IRN R160 applies. For non-domestic use IRN 090 applies.
  • Model
    E6791AA - Ideal fill
  • Factor: Ideal Standard (UK) Ltd. Hull
    Company Name
    Ideal Standard (UK) Ltd. Hull
    Address
    National Avenue, Hull
    Postcode
    HU5 4HS
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2