COMENDA ALI GROUP SRL Approvals


#2003381

Range of pass through commercial dishwashing machines (with a water softener - RA models, or without - R models). Flow is controlled by a solenoid valve, which incorporates a flow restrictor and a strainer, and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). . The water softener (where fitted) is located downstream of the ‘AB’ air gap. The product is supplied with a grey nylon braided EPDM lined flexible hose assembly with ¾” captive nut end connections incorporating EPDM washers. Maximum working pressure 4.0 bar. Maximum operating temperature 60°C.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2003381
Expiry date:
31/03/2025
Note:
This appliance incorporates a Fluid Category 5 backflow prevention device. Claims for flow rate are made by the manufacturer and not considered part of the listing.
Size:
¾” BSP (F) captive nut (to inlet hose).
Marking:
Comenda prime on front casing. Comenda, model, serial no., which includes date of manufacture (MMYY) as the final four digits and other technical information on adhesive label on side of unit.
Installation Requirements:
R001 R009 R520 R574
Model:
PC07 R, PC07 RA, PC09 R, PC09 RA, PC12 R, PC12 RA, HC10 R, HC10 RA, HC14 R, HC14 RA, PCXL R, PCXL RA, HCXL R & HCXL R.
Manufacturer:
COMENDA ALI GROUP SRL
Company Name
COMENDA ALI GROUP SRL
Address
VIA GALILEO GALILEI, 8 20060 CASSINA DE PECCHI MILAN

View All Listings by this Company

Print This Approval


#2004355

Range of front loading dishwashing machines (with a water softener - RA models, or without - R models). Flow is controlled by a solenoid valve, which incorporates a flow restrictor (5.5 lpm) and a strainer, and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The water softener (where supplied) is located after the ‘AB’ air gap. The product is supplied with a grey nylon braided EPDM lined flexible hose assembly with ¾” captive nut end connections incorporating EPDM washers. Maximum working pressure 4.0 bar. Maximum operating temperature 60°C.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2004355
Expiry date:
30/04/2025
Note:
This appliance incorporates a Fluid Category 5 backflow prevention device. Claims for flow rate are made by the manufacturer and not considered part of the listing.
Size:
¾” BSP (F) captive nut (to inlet hose).
Marking:
Comenda prime on front casing. Comenda, manufacturers address, model, serial no., which includes date of manufacture (MMYY) as the final four digits and other technical information on adhesive label on side of unit.
Installation Requirements:
R001 R009 R520 R574
Model:
PF45 R, PF45 RA, HF45 R, HF45 RA, HB35 R, HB35 RA, HB34-R, PB34-R, PF46-R & PF46-RA.
Manufacturer:
COMENDA ALI GROUP SRL
Company Name
COMENDA ALI GROUP SRL
Address
VIA GALILEO GALILEI, 8 20060 CASSINA DE PECCHI MILAN

View All Listings by this Company

Print This Approval


#2006301

Range of floor standing commercial glass washers incorporating a solenoid valve controlling the flow. The product is supplied with a double check valve assembly (suitable for backflow protection against fluid category 3). Maximum working pressure 4.0 Bar. Maximum operating temperature 60°C.

Section:
1310 Glass/Bottle Washers
WRAS Approval Number:
2006301
Expiry date:
30/06/2025
Size:
¾” BSP Captive nut
Marking:
Comenda and Comenda logo on face. Coemnda and Comenda logo, pressure and other technical information on side panel.
Installation Requirements:
R001 R160
Model:
PB24, PB24 A, PB34, PB34 A, HB24, HB24 A, HB34 & HB34 A Where A denotes the inclusion of a softener.
Manufacturer:
COMENDA ALI GROUP SRL
Company Name
COMENDA ALI GROUP SRL
Address
VIA GALILEO GALILEI, 8 20060 CASSINA DE PECCHI MILAN

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.