Crosswater Ltd. Approvals


#2303396

WC flushing cistern incorporating a side entry BS 1212-4 compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2303396
Size:
½” BSP (M)
Marking:
Crosswater logo inside cistern. 6L waterline on adhesive label within cistern
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2028
Model:
WCF80X45R WCC46X39R WCF98X45R

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#241088002

Range of wall mounted bar type thermostatic shower valves (brass bodies – various finishes) incorporating ceramic disc headwork which controls the flow to 2 outlets with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an optional flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241088002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4” BSP (F)
Marking:
Crosswater logo on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
RM531Wx Where x denotes the finish and is replaced with: C – Chrome, V - stainless steel effect, F - brushed brass, M - matt black, A – anthracite, W – white, B - brushed black chrome, N - polished nickel, L - brushed nickel, Q - unlacquered brass, RG - rose gold, BGR - brushed rose gold, P – copper, BP – Brushed Copper, AP – Antique Copper, S – stainless Steel, SF – Stainless Steel Brass Effect, SM – Black Stainless Steel, G – gunmetal, UB – unlacquered brushed brass, Z – Bronze, AZ – Antique Bronze, BZ - Brushed Bronze, GR – Graphite, G- Gold & T- Slate
Product Images

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#241288001

Range of wall mounted thermostatic blending valves, (brass bodies - various finishes) incorporating a single sequential headwork, controlling the flow and the temperature and a manually operated diverter to the shower outlets The inlet on the shower handset incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241288001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” x ¾” offset union
Marking:
Crosswater logo on body
Installation Requirements:
R001 R010 R030
Expiry date:
31/12/2029
Model:
RM650Wx Where x denotes the finish and is replaced with: C – Chrome, V - stainless steel effect, F - brushed brass, M - matt black, A – anthracite, W – white, B - brushed black chrome, N - polished nickel, L - brushed nickel, Q - unlacquered brass, RG - rose gold, BGR - brushed rose gold, P – copper, BP – Brushed Copper, AP – Antique Copper, S – stainless Steel, SF – Stainless Steel Brass Effect, SM – Black Stainless Steel, G – gunmetal, UB – unlacquered brushed brass, Z – Bronze, AZ – Antique Bronze, BZ - Brushed Bronze, GR – Graphite, G- Gold & T- Slate

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#250502720

Range of single hole, single outlet (swivel) combination tap assemblies incorporating a brass body (various finishes) and ceramic cartridge headwork with single lever operating members. The outlets incorporate a plastic aerator. Model CO721XX incorporates a pull-out spray with push button trigger assembly. The pull-out spray incorporates a single check valve assembly (however the complete unit has not been tested to demonstrate it provides adequate backflow protection). Model CO713XX incorporates a pull-down outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
250502720
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, PEX lined flexible hose assemblies with ½” BSP (F) end connections.
Marking:
Crosswater logo on base of tap
Installation Requirements:
R001 R009 R090
Expiry date:
31/05/2030
Model:
CO713DC, CO713DM, CO713DF, CO713DV & CO713DT. CO721DC, CO721DM, CO721DF, CO721DV & CO721DT. Where the finish is denoted by the last two letters of the model code: DC=Chrome DM= Matt Black DF= Brushed Brass DV= Brushed Nickle DT= Slate

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 6 of 6

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.