Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies. Incorporating a quarter turn ceramic disc headworks with either single lever, dome or cross-top operating members. The spout outlets incorporate plastic aerators or flow straighteners with a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2206370

Expiry date:

30/06/2027

Note:

R009 only applies to models supplied with PEX hoses.

Size:

Stainless steel braided EPDM or PEX lined flexible hoses with ½” BSP (F) captive nut end connections.

Marking:

TP on tap body.

Installation Requirements:

R001 R006 R009 R010

Model:

Supplied with both variations of hose. 664076 Base monobloc sink tap - (chrome) 740913 Belfort Monobloc Sink Mixer- (chrome)

Factor:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Phone

+44 (0) 1604 503457

View All Listings by this Company

Range of two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single operating members and a manual diverter to shower outlet. The spout outlets incorporates a plastic flow straightener and a NBR washer with a stainless steel strainer. The product is also supplied with a shower hose, handset and metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.

WRAS Approval Number:

2211349

Expiry date:

30/11/2027

Size:

¾” BSP (M).

Marking:

TP on tap body.

Installation Requirements:

R001 R006 R020

Model:

310804 Caldew bath shower mixer

Factor:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Phone

+44 (0) 1604 503457

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-down spray type incorporating a push button. The connection to the pull-down hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2303073

Expiry date:

31/03/2028

Size:

Stainless steel braided flexible hose assemblies with ½” BSP (F) conical nut end connections.

Marking:

TP on base of body

Installation Requirements:

R001 R090

Model:

357181 PULL OUT MONOBLOC MIXER KITCHEN TAP CHROME & BLACK HOSE

Factor:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Phone

+44 (0) 1604 503457

View All Listings by this Company

Range of single hole, single outlet, (swivel), combination tap assemblies (chromium plated brass bodies), incorporating quarter turn ceramic disc headworks and single lever operating members. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311367

Expiry date:

30/11/2028

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

TP on Body

Installation Requirements:

R001 R006 R010

Model:

352757 Loose Coil Tap Brushed

Factor:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Phone

+44 (0) 1604 503457

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating ceramic cartridge. The inlets incorporate stainless steel strainers. The spout outlets incorporate a plastic aerator or a flow straightener. Maximum working pressure 10 Bar. Maximum operating temperature 65 °C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2310394

Expiry date:

31/10/2028

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” BSP captive nut end connections

Marking:

TP on body

Installation Requirements:

R001 R006 R010

Model:

Ceramic Cartridge 352807 Arras Mono Swan Neck Sink Mixer Chrome

Factor:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Phone

+44 (0) 1604 503457

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or flow straightener. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311918

Expiry date:

30/11/2028

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

T[P on body.

Installation Requirements:

R001 R006 R010

Model:

546822 Contemporary Monobloc Sink Mixer Chrome 546825 Contemporary Monobloc 854368 Chantilly Monoblock Sink Mixer Matt 854367 Chantilly Monoblock Sink Mixer Brushed Brass 934960 Traditional Monobloc Sink Mixer Chrome 740892 Traditional Monobloc Mixer Brushed 158715 Talence Monobloc Sink Mixer Chrome 740922 Talence Monobloc Sink Mixer Brushed

Factor:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Phone

+44 (0) 1604 503457

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311368

Expiry date:

30/11/2028

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression connections.

Marking:

TP on Body

Installation Requirements:

R001 R090

Model:

546880 Albi Tight Coil Sink Mixer Chrome

Factor:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Phone

+44 (0) 1604 503457

View All Listings by this Company