3-in1 single hole, single outlet (swivel) combination tap assembly (chromium plated or brushed stainless steel PVD brass). The cold//hot/mixed water circuit incorporates a ceramic cartridge headwork with a single lever operating member. The near boiling water circuit incorporates a quarter turn ceramic disc headwork with a single lever operating member. The tap is supplied with a stainless steel braided PEX lined flexible hose assembly, brass adaptor incorporating a plastic flow regulator, NBR washer and plastic adaptor to connect the tap to the near boiling water unit (not supplied) and a PTFE flexible pipe to deliver near boiling water back to the tap. The spout outlet incorporates a plastic aerator, which includes a central stainless steel tube insert throughout the near boiling water outlet of the aerator. Maximum working pressure 10.0 bar. Maximum operating temperatures: 65°C (cold/hot/mixed water circuit). 99°C (near boiling water circuit after boiler unit, cold supply only prior to boiler unit).

Section:

0683 Combination Tap Assemblies

Section Subtitle:

Multiple Function Products listed in this section are supplied or intended for use with additional assemblies of fittings enabling the facility for chilled, boiling, carbonated or filtered water to be dispensed at the outlet. These taps may also dispense standard hot and ambient water, as will be specified in the description.

WRAS Approval Number:

2304349

Expiry date:

30/04/2028

Note:

This approval does not include a boiler unit for the near boiling water circuit. R008 applies to the plastic adaptor for connection to the near boiling water unit, and the PTFE hose for the near boiling water supply into the tap.

Size:

Stainless steel braided PEX lined flexible hose assemblies (x3) incorporating ½” captive nut end connections.

Marking:

Paini and Paini logo on rear of body.

Installation Requirements:

R001 R006 R007 R008 R009 R010

Model:

64CR493GAU (chrome-plated), 64PW493GAU (brushed stainless steel PVD).

Manufacturer:

Paini S.p.A. Rubinetterie

Company Name

Paini S.p.A. Rubinetterie

Address

Via Cremosina 43 28076 Pogno (NO)

Phone

+39 0322 9971

View All Listings by this Company

Range of single hole, single outlet (fixed), combination tap assemblies incorporating, (chrome plated brass bodies),with single lever operating members. The spout outlet incorporates a plastic flow straightener. Some products are supplied with a lever operated pop-up waste (not verified by test). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

240504009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

31/05/2029

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Sanifirst etched on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

53CR2050HPB59 H100 - 74001 Pressure-balance basin mixer, Unika lever without waste 53CR2050HPB670 H100 - 74003 Pressure-balance basin mixer, Clinica lever without waste 53CR2110HPB59 H100 - 74000 Pressure-balance basin mixer, Unika lever with waste 53CR2110HPB670 H100 - 74002 Pressure-balance basin mixer, Clinica lever with waste

Factor:

Les Robinets Presto S.A

Company Name

Les Robinets Presto S.A

Address

4 Rue Lavoiser 17110 St. Georges De Didonne.

Phone

+33 546 053 452

General Email

l.granseigne@presto.fr

View All Listings by this Company

Manufacturer:

Paini S.p.A. Rubinetterie

Company Name

Paini S.p.A. Rubinetterie

Address

Via Cremosina 43 28076 Pogno (NO)

Phone

+39 0322 9971

General Email

View All Listings by this Company