Klamflex Pipe Couplings (Pty) Ltd Approvals


WRAS Approval Number: 1706540

‘Klamflex LAK RAL 5005 Blue’. Factory applied, blue coloured epoxy paint. Apply as per ‘Powder-Lak (Pty) Ltd’. technical information sheet ‘Rev. Q4’ dated 2016. Cure for 10 minutes@180°C (metal temperature). For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

  • Section: 5030 Coatings, Paints & Linings
  • Section Subtitle: Factory applied pipe & fittings coatings.
  • WRAS Approval Number: 1706540
  • Expiry date: 30/06/2022
  • Manufacturer: Klamflex Pipe Couplings (Pty) Ltd
    Company Name
    Klamflex Pipe Couplings (Pty) Ltd
    Address
    PO Box 4073 Luipaardsvlei 1743 South Africa
    Phone
    +27 11762 5326
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807560

‘Code 29-0008: Description RAL9005 Black Deep FBE, Code 25-0084: Description RAL5015 Blue Sky & Code 25-1110: Description RAL5005 Blue Signal’. Factory applied, epoxy powder coatings. Apply all as per manufacturer’s ‘Technical Information rev. 2 Q2 – 2018’. Cure all for 10 minutes@200°C. For use with water up to 85°C. These materials are only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

  • Section: 5030 Coatings, Paints & Linings
  • Section Subtitle: Factory applied pipe & fittings coatings.
  • WRAS Approval Number: 1807560
  • Expiry date: 31/07/2023
  • Model
  • Manufacturer: Klamflex Pipe Couplings (Pty) Ltd
    Company Name
    Klamflex Pipe Couplings (Pty) Ltd
    Address
    PO Box 4073 Luipaardsvlei 1743 South Africa
    Phone
    +27 11762 5326
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801563

'EWA 12150 (EW48) Rev.1, EWA 12155A (EP55) Rev.1, EWA 12160A (EW 60) Rev.1, EWA 12165 (EW65 2GS) Rev.1, EWA 12170 (WRC 70) Rev.1, EWA 12175 (WRC 75) Rev.1 & EWA 12180 (EW80) Rev.1'. Black coloured, compression moulded, EPDM sheet materials. Shore hardness between 50 & 80. Tested in-radius size 1.2mm. For use with water up to 85°C.

  • Section: 5365 Rubbers
  • Section Subtitle: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
  • WRAS Approval Number: 1801563
  • Expiry date: 31/01/2023
  • Model
  • Manufacturer: Klamflex Pipe Couplings (Pty) Ltd
    Company Name
    Klamflex Pipe Couplings (Pty) Ltd
    Address
    PO Box 4073 Luipaardsvlei 1743 South Africa
    Phone
    +27 11762 5326
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1