Range of bottom entry BS1212-4 (2016) compact type float operated valves for WC flushing cisterns. The inlet incorporates a strainer, Maximum working pressure 10.0 bar. Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

1912048

Expiry date:

31/12/2024

Note:

Water hardness during the endurance test of (230 ± 20) ppm of calcium carbonate with a supply pressure of 1.5 ± 0.5 Bar.

Size:

½” BSP (M)

Marking:

Ideal Standard on valve cap BS1212-4 on valve body

Installation Requirements:

R001 R550 R560

Model:

EEM137G22,24,27,30-Univalve Bottom Inlet 220-300mm high-Ext Divertor. EEM137A22,24,27,30-Univalve Bottom Inlet Delay Fill 220-300mm high-Ext Divertor. EEM137E22,24,27,30-Univalve Bottom Inlet 200-300mm high-Std Divertor. EEM137C22,24,27,30-Univalve Bottom Inlet Delay Fill 220-300mm high-Std Divertor. EEM137J22,24,27,30-Univalve Bottom Inlet Delay Fill 220-300mm high-Tor Divertor. EEM137L30-Univalve Bottom Inlet Delay Fill 300mm high-Ext Divertor Reversed.

Factor:

Ideal Standard

Company Name

Ideal Standard

Address

Old Road Armitage Rugeley

Postcode

WS15 4BT

View All Listings by this Company

‘Univalve’ side entry inlet valves with plastic bodies and EPDM rubber seals. The outlet discharges at the top of the body. The product incorporates a plastic flow restrictor and filter within the body. The product is supplied with a plastic backnut. Maximum working pressure 12.5 bar. Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

1907085

Expiry date:

31/07/2024

Size:

½” BSP (M)

Marking:

Ideal Standard on body.

Installation Requirements:

R001 R550

Model:

Univalve side entry inlet valve with open outlet and Univalve side entry inlet valve with extended open outlet.

Factor:

Ideal Standard

Company Name

Ideal Standard

Address

Old Road Armitage Rugeley

Postcode

WS15 4BT

View All Listings by this Company