Range of single hole, single outlet (swivel) combination tap assembly with brass body (various finishes). Incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1905047

Expiry date:

31/05/2024

Size:

Stainless steel braided thermoplastic silicone lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

AXOR on base of body.

Installation Requirements:

R001 R006 R009 R010

Model:

14 850 XXX AXOR UNO SINGLE LEVER KITCHEN MIXER Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Deck mounted three-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating quarter turn ceramic disc headworks with dome type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste and stainless steel braided PEX lined flexible connecting hose assemblies, (to be installed between the side valves and the spout). Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole, metal, single outlet, fixed.

WRAS Approval Number:

1905045

Expiry date:

31/05/2024

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.

Marking:

Hansgrohe on spout

Installation Requirements:

R001 R006 R007 R009 R010

Model:

71 133 xxx Hansgrohe Logis 3-hole basin mixer 150 with pop-up waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of wall mounted exposed thermostatic shower mixing valve with brass bodies (various finish) incorporating a ceramic disc headwork which controls the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Model 13108 incorporates a manual diverter headwork which controls flow and diverts water to either handset or shower head with a dome type operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

1906013

Expiry date:

30/06/2024

Note:

This approval does not include a shower hose or handset.

Size:

½” BSP (M)

Marking:

Hansgrohe on front of valve body.

Installation Requirements:

R001 R010 R040

Model:

13 102 xxx Hansgrohe ShowerTablet 350 & 13 108 xxx Hansgrohe ShowerTablet 600 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of two-hole, wall mounted, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed.

WRAS Approval Number:

1906018

Expiry date:

30/06/2024

Note:

The basic sets are not approved in their own right.

Size:

½” BSP (F)

Marking:

AXOR on operating member.

Installation Requirements:

R001 R010 R040

Model:

38 121 xxx Axor Uno & 38 122 xxx Axor Uno finish sets for use with 13622180+13623180 basic sets. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. .

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members. The spout outlets incorporate plastic/rubber aerators. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole, metal, single outlet, fixed.

WRAS Approval Number:

1906035

Expiry date:

30/06/2024

Size:

½” BSP (F)

Marking:

Axor on spout.

Installation Requirements:

R001 R010 R040

Model:

Basic set (concealed part): 10 303 180 Axor for use with trim sets: 10 313 xxx Axor Starck 3 16 532 xxx Axor Montreux 16 534 xxx Axor Montreux, 39 143 xxx Axor Citterio 39 147 xxx Axor Citterio 39 313 xxx Axor Citterio 39 315 xxx Axor Citterio 39 144 xxx Axor Citterio 39 148 xxx Axor Citterio 39 314 xxx Axor Citterio 39 316 xxx Axor Citterio Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company