Range of manually operated regulating valves with bronze bodies and EPDM 'O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

2004007

Size:

See model.

Marking:

DN, PN and flow arrow on body. Danfoss on cap.

Installation Requirements:

R001

Expiry date:

30/04/2025

Model:

Multifunctional thermostatic Circulation valve: MTCV A DN15: ½” BSP (F). MTCV A DN20: ¾” BSP (F).

Approval Holder:

Danfoss A/S

Company Name

Danfoss A/S

Address

Nordborgvej 81 6430 Nordborg

Phone

+74 88 22 22

General Email

danfoss@danfoss.com

View All Listings by this Company

Manufacturer:

Danfoss Trata d.o.o.

Company Name

Danfoss Trata d.o.o.

Address

Joezeta Jame 16, SI-1210 Ljubljana Sentvid Slovenia

General Email

View All Listings by this Company

Copper brazed micro plate heat exchanger with copper and stainless-steel (316/1.4401) plates. Maximum working pressure 25.0 Bar. Maximum operating temperature 100°C

Section:

1350 Heat Exchangers

Size:

¾” BSP (M)

Marking:

Danfoss company logo, model name, maximum temperature and pressure, date of manufacture (YYYY-MM-DD) and other technical infomation on adhesive label on front of heat exchanger.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

XB06

Product Images

Approval Holder:

Danfoss A/S

Company Name

Danfoss A/S

Address

Nordborgvej 81 6430 Nordborg

Phone

+74 88 22 22

General Email

danfoss@danfoss.com

View All Listings by this Company

Manufacturer:

Danfoss Trata d.o.o.

Company Name

Danfoss Trata d.o.o.

Address

Joezeta Jame 16, SI-1210 Ljubljana Sentvid Slovenia

General Email

View All Listings by this Company

Range of copper or stainless-steel brazed heat exchangers available with various number of plates as listed below. Maximum working pressure 25.0 Bar (copper brazed models). Maximum working pressure 10.0 Bar (stainless steel brazed models). Maximum operating temperature 100.0°C.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

4G3/4 models = ¾” BSP, 4AYB models = 8mm porthole (XB05H-1-xx-2STS_10/10_S1_4AYB Only) or 15mm porthole for all other models, 4clip models = 15mm ID clip connection.

Marking:

DANFOSS logo, model code, date of manufacture (YYYY/WW), PN and other technical data laser engraved into the body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

XB05M-1-xx-2CU_25/25_S1_4G3/4, XB05X-1-xx-2CU_25/25_S1_4G3/4, XB05H-1-xx-2CU_25/25_S1_4G3/4, XB05X-1-xx-2STS_10/10_S1_4G3/4, XB05H-1-xx-2STS_10/10_S1_4G3/4, XB05H-1-xx-2CU_25/25_S1_4AYB, XB05X-1-xx-2CU_25/25_S1_4AYB, XB05H-1-xx-2STS_10/10_S1_4AYB, XB05X-1-xx-2STS_10/10_S1_4AYB, XB05H-1-xx-2STS_10/10_S1_4AYB, XB05X-1-20-2CU_25/25_S1_4Clip, XB05X-1-20-2STS_10/10_S1_4Clip, XB05H-1-xx-2CU_25/25_S1_4Clip, XB05H-1-xx-2STS_10/10_S1_4Clip. XB05 - frame size (XB05 = 312 mm x 76 mm) M, X, H - heatplate corrugation (different dimple design) - 1 - one pass heat exchanger (all XB05 range is one pass) “xx” = number of plates from 8 to 70. HP material = always 2; meaning material of heatplate which is always 1.4404. Brazing material = Stainless steel brazed = StS, Copper brazed = Cu. Pressure = approved pressure for primary and secondary channels (for XB05 is 25 bar when copper brazed and 10 bar when stainless steel brazed visible from application list in 202_f2). Connection configuration = position of connections (on XB05 only S1 applies). Connection type = G3/4 threaded ¾ connections AYB -no connections. Clip - tailormade solder and / or clip connections; usually tailormade for specific customer.

Product Images

Approval Holder:

Danfoss A/S

Company Name

Danfoss A/S

Address

Nordborgvej 81 6430 Nordborg

Phone

+74 88 22 22

General Email

danfoss@danfoss.com

View All Listings by this Company