Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The products are supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1909115

Expiry date:

30/09/2024

Size:

Stainless steel braided EPDM lined flexible hose assemblies with EPDM washers and ½” captive nut end connections.

Marking:

IFLO on rear of body.

Installation Requirements:

R001 R006 R010

Model:

295753 IFLO MONO BASIN MIXER

Factor:

City Plumbing Supplies/ Plumbing Trade Supplies

Company Name

City Plumbing Supplies/ Plumbing Trade Supplies

Address

PTS HOUSE ELDON WAY CRICK

Postcode

NN6 7SL

View All Listings by this Company

Range of gate valves with either brass or DZR brass (662468, 274331 & 662469 models) bodies with a brass wedge and PTFE packing. The valves operate via a non-rising spindle headworks that incorporates a wheel type operating member. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

1910067

Expiry date:

31/10/2024

Size:

35mm Compression 529538 & 662468 42mm Compression 529539 & 274331 54mm Compression 529540 & 662469

Marking:

CPS, date of manufacture (MM-YY), Size, CR & BS 5154 on body. (CR mark on DR models only) EN1254-2 AND SIZE ON END NUT

Installation Requirements:

R001

Model:

529538, 529539, 529540, 662468, 274331 & 662469 GATE VALVES

Factor:

City Plumbing Supplies/ Plumbing Trade Supplies

Company Name

City Plumbing Supplies/ Plumbing Trade Supplies

Address

PTS HOUSE ELDON WAY CRICK

Postcode

NN6 7SL

View All Listings by this Company

Range of in-line servicing valves (brass or nickel-plated brass body and ball) with EPDM gaskets and either a screwdriver or lever operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

1912065

Expiry date:

31/12/2024

Size:

22mm compression inlet/outlet

Marking:

CPS, FLOW ARROW, SIZE & DATE OF MANUFACTURE MM/YY ON BODY EN1254-2 & SIZE ON END NUT

Installation Requirements:

R001

Model:

Screwdriver operated. 961708 (Brass) 961665 (Nickel plated Brass)

Factor:

City Plumbing Supplies/ Plumbing Trade Supplies

Company Name

City Plumbing Supplies/ Plumbing Trade Supplies

Address

PTS HOUSE ELDON WAY CRICK

Postcode

NN6 7SL

View All Listings by this Company

Double check valve assembly consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:

0032 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type EC - Verifiable double check valve.

WRAS Approval Number:

2003075

Expiry date:

31/03/2025

Size:

54mm compression

Marking:

CPS, CR, FLOW ARROW, DATE OF MANUFACTURE MM/YY & SIZE ON BODY EN1254-2 & SIZE ON END NUT

Installation Requirements:

R001

Model:

662475 BACKFLOW PREVENTION DEVICES

Factor:

City Plumbing Supplies/ Plumbing Trade Supplies

Company Name

City Plumbing Supplies/ Plumbing Trade Supplies

Address

PTS HOUSE ELDON WAY CRICK

Postcode

NN6 7SL

View All Listings by this Company

Range of spherical servicing valves having either natural (870228 models) or nickel plated (961159, 837973, 845187 & 845188 models) brass bodies and EPDM ‘O’-rings and can be lever type or screwdriver operated. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

1907397

Expiry date:

31/07/2024

Size:

See model.

Marking:

CPS, FLOW ARROW, SIZE & DATE OF MANUFACTURE MM/YY ON BODY EN1254-2 & SIZE ON END NUT

Installation Requirements:

R001

Model:

870228: 15mm compression. 961159: 15mm compression. 837973: ISO valve with handle: 15mm compression. 845187: Angle Servicing valve: 15mm compression x ½” captive nut. 845188: Straight Servicing valve: 15mm compression x ½” captive nut.

Factor:

City Plumbing Supplies/ Plumbing Trade Supplies

Company Name

City Plumbing Supplies/ Plumbing Trade Supplies

Address

PTS HOUSE ELDON WAY CRICK

Postcode

NN6 7SL

View All Listings by this Company