Range of wall mounted, thermostatic bar shower mixers (brass bodies – various finishes), incorporating a quarter turn ceramic disc headwork that controls the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. Models 483841 incorporate a half turn ceramic disc headwork that diverts the flow to an overhead shower or shower handset. Both inlets incorporate an approved check valve cartridge and stainless steel strainers however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models 248683 & 287697 Maximum working pressure 10 bar. Maximum operating temperature 65 C. Model 483841 Maximum working pressure 5 bar. Maximum operating temperature 60 C.

Section:

2010 Shower Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

240888002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

31/08/2029

Note:

Models 483841 are supplied with an overhead shower, shower hose & handset. Models 248683 & 287697 are supplied with a shower hose and handset.

Size:

½”x ¾” BSP (M) offset unions 15mm compression

Marking:

248683 CPS on body 287697 iflo on body 483841 iflo on body

Installation Requirements:

R001 R010 R040

Model:

248683 Thermo bar mixer cool touch and single mode kit 287697 iflo woodcote thermostatic shower 483841 iflo Ashby Thermostatic Bar Mixer Shower

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of wall mounted hose union bib taps incorporating a rising spindle headwork with a T - handle operating member and a brass body. The spout outlets incorporate a hose union connector. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1780 Taps

Section Subtitle:

Hose union. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building. Where in existing house installations a hosepipe is to be used from an existing hose union tap located outside a house and which is not provided with backflow protection, either: a. The existing hose union tap should be provided with a double check valve (Type EC or ED) located inside the building; or b. The tap should be replaced with a hose union tap that incorporates a double check valve (type HUK1); or c. A hose union backflow prevention (Type HA) or a double check valve should be continuously fitted to the outlet of the tap; or d. Is legally installed in any premises.

WRAS Approval Number:

250104005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

31/01/2030

Size:

½” BSP(M)

Marking:

CPS, size & date of manufacture (MM-YY) on body.

Installation Requirements:

R001 R040

Model:

960981 (natural brass).

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of WC dual flush drop valve comprising of a plastic body, silicone seating washer and an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2107159

Expiry date:

31/07/2026

Note:

Open outlet use only.

Size:

See models.

Marking:

Plumbright on the body. WRAS & Model code on body

Installation Requirements:

R001 R571

Model:

137004 PLUMBRIGHT: 1½” BSP (M),

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company