Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headworks on the left-hand side controlling the hot water flow, and a manual diverter on the right-hand side controlling the cold water flow (forward) or filtered water (backward) all with single lever operating members. The near boiling water flow is activated via a magnetic key fob being placed on the rear of the tap body (boiler unit not supplied). The spout outlet incorporates a plastic aerator. The hot and cold inlet hoses incorporate an approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with optional ⅜” BSP (M) x ½” BSP (F) adaptors for the hot and cold inlet hoses. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C for mixed (ambient hot and cold + filtered water), 98°C for near boiling water outlet.

Section:

0490 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, double outlet, swivel.

WRAS Approval Number:

1904363

Expiry date:

30/04/2024

Note:

R009 applies to the near boiling water inlet hose. R010 applies to the hot and cold inlet hoses. This product is not supplied with a filter or filter housing or boiler unit, these items are not concerned covered by the scope of the approval.

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections (hot and cold inlets). Stainless steel braided silicone lined flexible hose assembly with ⅜” captive nut end connection (near boiling water inlet hose). 1/8” BSP (F) (filtered water connection)

Marking:

Abode, SMR and date of manufacture etched on body. Date of manufacture in the following format: X1X2XX3. X1 = Day of the month: 1-9 = 1-9, 0 = 10, A-H = 11-18, J-N = 19-23, P-T = 24-28, V-X = 29-31. X2 = Month: a-n = Jan-Dec. XX3 = Year: 19-24 = 2019-2024. E.g. Wd19 = 30th April 2019.

Installation Requirements:

R001 R006 R009 R010

Model:

Profile (4 in 1 trend), Project (4 in 1 modern), Province (4 in 1 classic and 4 in 1 traditional).

Factor:

Abode Home Products Ltd.

Company Name

Abode Home Products Ltd.

Address

Unit L Zenith Park Whaley Road

Postcode

S75 1HT

View All Listings by this Company

Single hole, single outlet combination tap assemblies (chrome plated brass body) incorporating ceramic cartridge headwork with lever type operating member. The outlet incorporates a plastic aerator. The inlet hoses incorporate a single check valve verified by test (suitable for backflow protection against Fluid Category 2) (Maximum working pressure 5.5 bar. Maximum operating temperature 60ºC.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1909096

Expiry date:

30/09/2024

Size:

15mm compression

Marking:

Abode on operating member

Installation Requirements:

R001 R010 R090

Model:

Virtue Pull-out Spray

Factor:

Abode Home Products Ltd.

Company Name

Abode Home Products Ltd.

Address

Unit L Zenith Park Whaley Road

Postcode

S75 1HT

View All Listings by this Company

Manufacturer:

Vicario Armando & C Srl

Company Name

Vicario Armando & C Srl

Address

View All Listings by this Company