Water Regulations Approval Scheme Ltd

Water softeners

Section Code 2450 :

WRAS Approval Number: #1904038

Range of electronically controlled commercial ion exchange water softeners (salt regenerated). Operation is by an ion exchange resin filled pressure vessel with a separate brine tank. Maximum working pressure 8.0 Bar. Cold water use only.

Section:: 2450 Water softeners
WRAS Approval Number:: 1904038
Expiry date:: 30/04/2024
Note:: R008 applies to the pressure vessels (which are to be installed where light is excluded).
Size:: See model.
Marking:: Culligan logo, product info on label on valve head
Installation Requirements:: R001 R008 R160 R170 R290 R415 R510
Model:: HE SX 1” 20 (762614) – Monarch model SC20-HE (SC20HE614) HE SX 1” 40 (762618) - Monarch model SC40-HE (SC20HE618) HE SX 1” 60 (762622) – Monarch model SC60-HE (SC20HE622) HE SX 1” 90 (762624) – Monarch model SC90-HE (SC20HE624) HE SX 1.5” 60 (762626), HE SX 1.5” 90 (762628), HE SX 1.5” 120 (762630), HE SX 1.5” 150 (762632), HE SX 1.5” 210 (762634) HE Twin 1” 60 (762636) – Monarch model DA60-HE (DA60HE636) HE Twin 1” 90 (762638) – Monarch model DA90-HE (DA90HE638) HE Twin 1.5” 60 (762640), HE Twin 1.5” 90 (762642), HE Twin 1.5” 120 (762644), HE Twin 1.5” 150 (762646), HE Twin 1.5” 210 (762648) Models added September 2021: HE SX 1.5” 60 GREY (764925) HE SX 1.5” 90 GREY (764926) HE SX 1.5” 120 GREY (764927) HE SX 1.5” 150 GREY (764928) HE SX 1.5” 210 GREY (764929) HE Twin 1.5” 60 GREY (764945) HE Twin 1.5” 90 GREY (764946) HE Twin 1.5” 120 GREY (764947) HE Twin 1.5” 150 GREY (764948) HE Twin 1.5” 210 GREY (764949) Models added June 2022: HE SX 1" 20 GREY (765051) HE SX 1" 40 GREY (765052) HE SX 1" 60 GREY (765053) HE Twin 1" 60 GREY (765067)
Factor:: Aqua Cure Limited

Company Name
Aqua Cure Limited
Address
3A & 3B Dakota business park Dakota way Burscough Lancashire
Postcode
L408AF
Country
United Kingdom
Phone
01704 516916
General Email
Phill.mayer@aquacure.co.uk

View All Listings by this Company
Manufacturer:: Aqua Cure Limited

Company Name
Aqua Cure Limited
Address
3A & 3B Dakota business park Dakota way Burscough Lancashire
Postcode
L408AF
Country
United Kingdom
Phone
01704 516916
General Email
Phill.mayer@aquacure.co.uk

View All Listings by this Company

WRAS Approval Number: #1904071

Range of commercial and domestic ion exchange water softeners (salt regenerated). Operation is by an electronically controlled ion exchange resin filled plastic pressure vessel with integral salt cabinet (domestic models) or separate brine tank (commercial models). Maximum working pressure 8.0 Bar. Cold water use only.

Section:: 2450 Water softeners
WRAS Approval Number:: 1904071
Expiry date:: 30/04/2024
Note:: R150 applies to domestic models. R160 applies to commercial models.
Size:: ¾” BSP (M) inlet/outlet (VAK 6/10/15/25 models) 1” BSP (F) inlet/¾” BSP (M) outlet (HydroION VAS/VAD 25/50/75 C/CS 1 A B models) 1 ¼” BSP (M) inlet/outlet (HydroION VAS/VAD 125/150/200 C/CS 1.5 A B models) DN80 flange inlet/outlet (HydroION VAS/VAD 250/375/600 C/CS 2 A B models)
Marking:: Hydrotec logo, model and product info on label on body
Installation Requirements:: R001 R008 R150 R160 R170 R290 R415 R510
Model:: Domestic models: VAK 6/10/15/25. Commercial models (Simplex and Duplex): HydroION VAS/VAD 25/50/75 C/CS 1 A B, HydroION VAS/VAD 125/150/200 C/CS 1.5 A B, HydroION VAS/VAD 250/375/600 C/CS 2 A B.
Factor:: Hydrotec International Water Treatment Limited

Company Name
Hydrotec International Water Treatment Limited
Address
38 Main Street Swords Country Dublin
Country
Ireland

View All Listings by this Company

WRAS Approval Number: #1906070

Ion exchange water softener (salt regenerated) for domestic use. Incorporating NBR ‘O’-rings, seals and LLDPE tubing. Operation is by an ion exchange resin filled plastic pressure vessel with integral salt cabinet and timer/manual regeneration control. The appliance incorporates single check valve cartridges however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Cold water use only.

Section:: 2450 Water softeners
WRAS Approval Number:: 1906070
Expiry date:: 30/06/2024
Note:: Discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.
Size:: ¾” BSP (M) inlet/outlet
Marking:: Harvey Water Softener on salt lid.
Installation Requirements:: R001 R008 R150 R170 R290 R415
Model:: H20B Water Softener
Manufacturer:: Harvey Water Softeners Ltd.

Company Name
Harvey Water Softeners Ltd.
Address
Hipley Street, Old Woking, Surrey
Postcode
GU22 9LQ
Country

Phone
+44 1483 753404

View All Listings by this Company

WRAS Approval Number: #1904082

Section:: 2450 Water softeners
WRAS Approval Number:: 1904082
Expiry date:: 30/04/2024
Note:: R008 applies to the pressure vessels (which are to be installed where light is excluded).
Size:: See model.
Marking:: Culligan logo, product info on label on valve head Culligan on body
Installation Requirements:: R001 R008 R160 R170 R290 R415 R510
Model:: CTM SX 1.5” 60, CTM SX 1.5” 90, CTM SX 1.5” 120, CTM SX 1.5” 150 & CTM SX 1.5” 210
Factor:: Culligan (UK) Ltd.

Company Name
Culligan (UK) Ltd.
Address
Halifax House Coronation Road High Wycombe
Postcode
HP12 3SE
Country
United Kingdom
Phone
01494 441286
General Email
commercial@culligan.co.uk

View All Listings by this Company

WRAS Approval Number: #2104009

Range of ion exchange water softeners (salt regenerated) for domestic use. Maximum working pressure 6.0 bar. Cold water use only.

Section:: 2450 Water softeners
WRAS Approval Number:: 2104009
Expiry date:: 30/04/2026
Size:: ¾” BSP (M) inlet/outlet or 1” BSP (M) inlet/outlet
Marking:: Canature, model and other product info on adhesive label on rear of body.
Installation Requirements:: R001 R150 R170 R290 R415
Proviso:: Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.
Model:: Model CSAA-B-XXYY-Z AA denotes shape of softener external cabinet and can be replaced with ‘1H’ to ‘20H’ B denotes shape of softener cover and can be replaced with ‘II’, ‘slide cover’ or ‘plus’. XX denotes diameter of resin tank between ‘08’ and ‘10’. YY denotes height of resin tank between ‘15’ and ‘35’. Z denotes control valve and is replaced with ‘BNT850SE’ or ‘null’ which represents ‘BNT850HE’ control valve. Model MN XXYY XX denotes diameter of resin tank and is replaced with ‘09’. YY denotes height of resin tank between ‘13’ and ‘35’. Duplex XXYY XX denotes diameter of resin tank and is replaced with ‘10’. YY denotes height of resin tank and is replaced with ‘17’ or ‘35’.
Factor:: Canature Health Technology Group Co., Ltd.

Company Name
Canature Health Technology Group Co., Ltd.
Address
No.508&518, Chuanda Road, Pudong New Area, Shanghai
Country
China

View All Listings by this Company