Water Coolers

Section Code 2420 : Drinking.

Back To Directory Sections

#1906036

‘NIAGARA FAMILY’ range of free standing or table top, ambient, chilled or sparkling water (with gas) dispensing units with flow controlled via either a solenoid operated push button or an external tap or dispensing equipment. The units incorporate solenoid valves, PE hoses, plastic fittings. Models including ‘WG’ as part of the model incorporate a non-verifiable single check valve assembly (suitable for backflow protection against Fluid Category 2). The ACWG (EC) models incorporates a pump and a carbonating unit. The outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
1906036
Expiry date:
30/06/2024
Note:
Products with ‘AWCG’ in the model incorporate a carbonating unit and IRN R160 applies to them. IRN R150 applies to all other models.
Size:
¾” BSP male inlet
Marking:
Niagara and Cosmetal on control panel.
Installation Requirements:
R001 R150 R160
Model:
Niagara range comprising of models: 65 IB ACWG 65 IB ACWGUV 65 IB AC 65 IB AC UV 65 IB EC ACWG 65 IB EC ACWG UV 65 IB AC EC 65 IB AC EC UV TOP 65 IB ACWG TOP 65 IB ACWG UV TOP 65 IB EC ACWG TOP 65 IB EC ACWG UV TOP 65 IB AC TOP 65 IB AC UV TOP 65 IB EC AC TOP 65 IB EC AC UV IN 65 IB ACWG IN 65 IB AC 120 IB ACWG 120 IB ACWGUV 120 IB AC 120 IB AC UV 120 IB EC ACWG 120 IB EC ACWG UV 120 IB AC EC 120 IB AC EC UV TOP 120 IB ACWG TOP 120 IB ACWG UV TOP 120 IB EC ACWG TOP 120 IB EC ACWG UV TOP 120 IB AC TOP 120 IB AC UV TOP 120 IB EC AC TOP 120 IB EC AC UV 120 IB ACWG 120 IB AC 180 IB ACWG 180 IB ACWG UV 180 IB AC 180 IB AC UV 180 IB EC ACWG 180 IB EC ACWG UV 180 IB AC EC 180 IB AC EC UV TOP 180 IB ACWG TOP 180 IB ACWG UV TOP 180 IB EC ACWG TOP 180 IB EC ACWG UV TOP 180 IB AC TOP 180 IB AC UV TOP 180 IB EC AC TOP 180 IB EC AC UV 180 IB ACWG 180 IB AC
Manufacturer:
Celli SPA
Company Name
Celli SPA
Address
Via Casiono Albini, 605, 47842 San Giovanni in Marignano (RN) - Italy

View All Listings by this Company

Print This Approval


#1907039

`River` range of drinking water fountains which dispense ambient and/or chilled water. Flow is controlled via self-closing headworks. Maximum working pressure 6.0 bar. Cold water use only

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
1907039
Expiry date:
31/07/2024
Size:
8mm push-fit
Marking:
Cosmetal on label on front or rear of unit
Installation Requirements:
R001 R150
Model:
River A G62/G61. River 20 IB C G62/G61. River 30 IB C G63/G61. River 30 IB C G61. River 30 IB C G62/G61. River 30 IB C G62. River 30 IB C G63/G61 AF. River 30 IB C G61 AF. River 30 IB C G62/G61 AF. River 30 IB C G62 AF. River 30 IB C G62. River 30 IB C G62/G61. River 55 IB C G62. River 55 IB C G61 AF. River 55 IB C G62/G61 AF. River 55 IB C G62 AF. River 55 IB C G61. River 55 IB C G62/G61. River UP 30 IB C G62/61. River UP 30 IB C G62. River UP 55 IB C G62/61. River UP 55 IB C G6. Models Added June 2020: SCW 14B EVO. SCW 14 FP EVO. Trevi 50. SW 12 USPH-S. SW 12. SRAF 25. SRAF 50. ANMX 308. ANMX 309. ANMX 311. ANMX 312.
Manufacturer:
Celli SPA
Company Name
Celli SPA
Address
Via Casiono Albini, 605, 47842 San Giovanni in Marignano (RN) - Italy

View All Listings by this Company

Print This Approval


#1909054

Range of inline under counter water chillers incorporating stainless steel coil tubing. Maximum working pressure 5.5 Bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
1909054
Expiry date:
30/09/2024
Size:
10mm spigot inlets/outlets
Marking:
Oprema logo, model, serial number and technical info on a metal data plate on front of unit. Oprema logo on hologram label on front of unit.
Installation Requirements:
R001 R120 R150 R170 R040
Model:
Air cooled models: OP 062 BC-A (code 712843). OP 103 BC-A (code 712831). OP 205 series: OP 205 BC-A (code 712851). OP 205 BC-A (code 712854). OP 310 series: OP 310 BC-A (code 712837). Heat dump - plate heat exchanger models: OP 205 series: OP 205 BC-HD (code 712852). OP 310 series: OP 310 BC-HD (code 712838). Plate heat exchanger models: OP 205 series: OP 205 BC-W (code 712853). OP 310 series: OP 310 BC-W (code 712839).
Manufacturer:
Oprema d.d.
Company Name
Oprema d.d.
Address

View All Listings by this Company

Print This Approval


#2010336

Range of under-counter or counter-top drinking water dispensers delivering still ambient, still chilled & sparkling water. HygienePlus®. Models incorporate a built-in filter system. The flow is controlled by a solenoid valve which is either operated by a touch or a touch pad. The water is dispensed via a tap arrangement on under-counter versions or an integrated outlet on counter-top versions. The inlets incorporate an approved check valve cartridge assembly however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
2010336
Expiry date:
31/10/2025
Size:
¾” BSP (F).
Marking:
Brita, model and technical information on side or top body.
Installation Requirements:
R001 R150 R160 R170
Model:
VIVREAU Extra 50. VIVREAU Extra 50 HygienePlus®. VIVREAU Extra 85. VIVREAU Extra 85 HygienePlus®. VIVREAU Top 50. VIVREAU Top 50 HygienePlus®. VIVREAU Top 85. VIVREAU Top 85 HygienePlus®.
Factor:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Country
Germany
Phone
+49 6128 746 0
General Email
info@brita.net

View All Listings by this Company

Print This Approval


#2006349

Range of water fountains and bottle fillers, water fountains which can be chilled or ambient outlet temperatures, incorporating a solenoid controlling the flow which is activated via either a push button or IR activated sensor. Split level models incorporate both bottle filler and fountain outlets. Maximum working pressure 7.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
2006349
Expiry date:
30/06/2025
Size:
10mm copper tube
Marking:
Oasis and technical information on body.
Installation Requirements:
R001 R008 R040
Model:
PACY, PVACY, PACSLY, P8ACY, PV8ACY, P8ACSLY, PV8ACSLY, PEBFY, PSBFY, PVEBFY, PVSBFY, PEBFSLY, PSBFSLY, PVEBFSLY, PVSBFSLY, P8EBFY, P8SBFY, PV8EBFY, PV8SBFY, P8EBFSLY, P8SBFSLY, PV8EBFSLY, PV8SBFSLY.
Factor:
Oasis
Company Name
Oasis
Address
Bunree Industrial Estate Ballina Co. Mayo Republic of Ireland
Postcode
F26 D5RS

View All Listings by this Company

Print This Approval


#2101330

Range of undercounter or deck mounted drinking water fountains which dispense ambient and/or chilled water. Flow is controlled via a solenoid valve and the products are activated via a push button or infa-red sensor . Maximum working pressure 7.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
2101330
Expiry date:
31/01/2026
Size:
10mm copper tube
Marking:
Oasis on bottle filler. Model and other technical information on chiller unit.
Installation Requirements:
R001 R006 R150
Model:
Push button: PWSBFY MWSBFY PWSMSBFY MWSMSBFY MW8SBFY MWSM8SBFY Infa-red sensor: PWEBFY MWEBFY PWSMEBFY MWSMEBFY MW8EBFY MWSM8EBFY Code: PW = retrofit, MW = recessed, SM = surface mounted, EBF = IR activated, SBF button activated, S = non refrigerated, Y = 230v
Factor:
Oasis
Company Name
Oasis
Address
Bunree Industrial Estate Ballina Co. Mayo Republic of Ireland
Postcode
F26 D5RS

View All Listings by this Company

Print This Approval


#2006350

Water chiller unit for under counter installation, to be used in conjunction with an outlet tap arrangement or flow control device (not supplied as part of this approval). Maximum working pressure 7.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
2006350
Expiry date:
30/06/2025
Size:
10mm copper tube
Marking:
Model and other technical information on body
Installation Requirements:
R001 R150
Model:
RLF8Y
Factor:
Oasis
Company Name
Oasis
Address
Bunree Industrial Estate Ballina Co. Mayo Republic of Ireland
Postcode
F26 D5RS

View All Listings by this Company

Print This Approval


#2209040

Range of floor or wall mounted water refill units. The flow is controlled via self-closing headworks with a dome type push button operating member. The outlet incorporates a bottle filling outlet with an aerator. The inlet incorporates an isolation valve, a drain valve and an approved double check valve suitable for backflow protection against fluid category 3. Maximum working pressure – 5.0 Bar, cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
2209040
Expiry date:
30/09/2027
Size:
25mm compression fitting
Marking:
Our only world + WRS 01 on plate on body
Installation Requirements:
R001 R430 R511
Model:
WRS 01 (Available in both floor or wall mounted variants).
Factor:
Our Only World
Company Name
Our Only World
Address
35 Higher Tristram Polzeath Wadebridge Cornwall PL276TF

View All Listings by this Company

Print This Approval


#2311056

Range of undercounter water chillers with a stainless-steel cooling tank including a drain outlet. Maximum working pressure 3.0 Bar. Maximum operating temperature 38°C.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
2311056
Expiry date:
30/11/2028
Size:
¼” NFTF (M).
Marking:
HYCO logo on outer casing. Hyco logo, voltage, batch number and other technical information on adhesive label on outer casing.
Installation Requirements:
R001 R150 R170 R511
Proviso:
Discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Model:
SAPUC1, SAPUC2.
Factor:
Hyco Manufacturing Ltd.
Company Name
Hyco Manufacturing Ltd.
Address
Unit 1 & 2 Normandy Court, Express Way, West Yorkshire
Postcode
WF10 5NR
Phone
01924 225 200

View All Listings by this Company

Print This Approval


#240202711

‘G5 C’ command centre providing chilled (filtered) water via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The products are supplied with a filter cartridge. The inlet to the command centre incorporates two approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum inlet supply pressure 5.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
240202711
Expiry date:
28/02/2029
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and HydroTap logo on body.
Installation Requirements:
R001 R009 R040 R150 R170
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Command Centre UK HydroTap Mains models: H50011000UK - G5 C100 M.
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200
Country
Australia

View All Listings by this Company

Print This Approval


#240202712

‘G5 CS’ command centre providing chilled or chilled sparkling water (both filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The product incorporates a pressure reducing valve (adjustable outlet pressure between 2.25 and 2.75 bar) on the supply to the carbonator unit. The carbonator inlet incorporates a non-return valve. The product is supplied with a filter cartridge. The inlet to the command centre incorporates two approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum inlet supply pressure 5.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
240202712
Expiry date:
28/02/2029
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and HydroTap logo on body.
Installation Requirements:
R001 R009 R040 R160 R170 R415
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Command Centre UK HydroTap Mains model: H50065000UK - G5 CS100 M.
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200
Country
Australia

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.