Washing Machines

Section Code 2390 : Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

Back To Directory Sections

#1903307

Range of undercounter commercial dishwashing machines, flow is controlled via solenoid valve that discharges via a Type ‘AA’ air gap. The machine incorporates a salt regenerated water softener. Maximum working pressure 4.0 Bar. Cold water only

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
1903307
Expiry date:
31/03/2024
Size:
¾” BSP Captive nut.
Marking:
Fagor and Fagor logo on front of machine. Fagor and other technical information on data plate.
Installation Requirements:
R001 R160
Model:
E-VO ADVANCE AD-505 SOFT
Manufacturer:
Fagor Industrial S Coop.
Company Name
Fagor Industrial S Coop.
Address
Barrio Sancholopetegui 22 20560 - Oñati
Country
Spain
Phone
+34 943 71 80 30

View All Listings by this Company

Print This Approval


#1903341

Range of hood type commercial dishwashing machines. Flow is controlled via solenoid valve and discharges via a Type ‘AA’ air gap. The machines with ‘SOFT’ in the model incorporate a salt regenerated water softener. Maximum working pressure 4.0 bar. Maximum operating temperature 60°C

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
1903341
Expiry date:
31/03/2024
Note:
This appliance incorporates a Fluid Category 5 backflow prevention device.
Size:
PVC lined flexible hose assembly with ¾” captive nut end connections
Marking:
Fagor on front. Adhesive label on lower panel with Fagor, model & technical information.
Installation Requirements:
R001 R009 R160
Model:
E-VO CONCEPT+ COP-144 H E-VO CONCEPT+ COP-144 H B E-VO CONCEPT+ COP-144 H DD E-VO CONCEPT+ COP-144 H B DD E-VO CONCEPT+ COP-144 H HRS E-VO CONCEPT+ COP-144 H HRS B E-VO CONCEPT+ COP-144 H HRS B DD E-VO CONCEPT+ COP-144 H HRS DD E-VO CONCEPT+ COP-174 H E-VO CONCEPT+ COP-174 H B E-VO CONCEPT+ COP-174 H DD E-VO CONCEPT+ COP-174 H B DD E-VO CONCEPT+ COP-174 H HRS E-VO CONCEPT+ COP-174 H HRS B E-VO CONCEPT+ COP-174 H HRS B DD E-VO CONCEPT+ COP-174 H HRS DD E-VO ADVANCE AD-125 H E-VO ADVANCE AD-125 H AU E-VO ADVANCE AD-125 H HRS AU E-VO ADVANCE AD-125 H HRS E-VO ADVANCE AD-125 H HRS SOFT E-VO ADVANCE AD-125 H SOFT
Manufacturer:
Fagor Industrial S Coop.
Company Name
Fagor Industrial S Coop.
Address
Barrio Sancholopetegui 22 20560 - Oñati
Country
Spain
Phone
+34 943 71 80 30

View All Listings by this Company

Print This Approval


#1903088

Range of front loading commercial dishwashers with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 Bar. Maximum operating temperature 60°C.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
1903088
Expiry date:
31/03/2024
Note:
This appliance incorporates a Fluid Category 5 backflow prevention device.
Size:
Stainless steel braided EPDM lined flexible hose assembly with ¾” captive nut end connections.
Marking:
DC Products, DC Products logo, model, operating info on label on right side panel. DC series on door handle
Installation Requirements:
R001 R574
Model:
SD40A, SD45A, SD50A, SXD45A, SXD50A. ED50A. PG/PD40A, PG/PD45A, PG/PD50A. OG/OD40A, OG/OD50A. DC1500A, DC1650A, DC2000A, DC3000A, DC4600A. X600A, X700A. W700A, W1100A, W1400A, W1400SA. SD900A. PD1000A, PD1300A, PD1350A. OD1400A, OD1425A, OD1450A. DCF2500A, DCF3500A, DCF5000A. DC57-42A, DC57-62A. DC67A, DC109A.
Factor:
DC Products Ltd
Company Name
DC Products Ltd
Address
Unit 25 lodge hill Industrial Park Westbury Sub Mendip Somerset
Postcode
BA5 1EY

View All Listings by this Company

Print This Approval


#1906093

Range of commercial dishwashers. Flow is controlled by a solenoid valve and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). E ES models incorporate a heat recovery system and a double check valve assembly. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
1906093
Expiry date:
30/06/2024
Note:
These appliances incorporate Fluid Category 5 backflow protection. This approval is for the dishwasher and the components listed in the description and doesn’t include any accessories, e.g. booster pump.
Size:
¾” captive nut
Marking:
Aristarco models - Aristarco on front panel. Kastel models – Kastel on front panel. Models without brand: Aristarco, model, product info on label on side panel. No marking on front panel.
Installation Requirements:
R001 R009 R574
Model:
Aristarco brand: AF 40.30, AF 45.30, AF 50.35, AF 50.35 H, AF 60.40, AS 40.30, AS 45.30, AS 50.35, AS 60.40, AL 40.30, AL 50.35, AH 800, AH 1040, AH 1240, AH 800 E ES, AH 1040 E ES, AH 1240 E ES. AU 60-40, AU 60-45, AU 60-42, AU 55-65, AU 55-80, AU 65-65, AU 125-80, AU 55-65 E ES, AU 55-80 E ES, AU 65-65 E ES, AU 125-80 E ES. Kastel brand: FK 40, FK 45, FK 50, FK 50 H, FK 60/40, SK 40, SK 45, SK 50, SK 60/40, LK 40, LK 50, HK 850, HK 1200, HK 1500, HK 850 E ES, HK 1200 E ES, HK 1500 E ES, UK 60/40, UK 60/45, UK 60/42, UK55/65, UK 55/80, UK 65/65, UK 125/80, UK 55/65 E ES, UK 55/80 E ES, UK 65/65 E ES, UK 125/80 E ES. Models without brand: EF 40, EF 45, EF 50, EF 50 H, EF60/40, ES 40, ES 45, ES 50, ES 60/40, EL 40, EL 50, EH 850, EH 1200, EH 1500, EH 850 E ES, EH 1200 E ES, EH 1500 E ES, EU 60/40, EU 60/45, EU 60/42, EU 55/65, EU 55/80, EU 65/65, EU 125/80, EU 55/65 E ES, EU 55/80 E ES, EU 65/65 E ES, EU 125/80 E ES
Manufacturer:
Aristarco S.p.A.
Company Name
Aristarco S.p.A.
Address

View All Listings by this Company

Print This Approval


#1907005

Range of commercial dish washing machines with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
1907005
Expiry date:
31/07/2024
Size:
¾” BSP captive nut
Marking:
Eurotec, Colged logo, model & technical information on label on side panel
Installation Requirements:
R001 R574
Model:
TopTech 34-23D, 35-23D, 36-23D, 36L-23D, 38-23D & 39-23D
Manufacturer:
Eurotec Srl div Colged
Company Name
Eurotec Srl div Colged
Address
Via Provinciale Romana 6-55010 Badia Pozzeveri Italy

View All Listings by this Company

Print This Approval


#1909030

Range of under counter and hood type dishwashing machines with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). There is a double check valve supplied with every machine. Some models are available with AirConcept and GiO-Module options. Maximum working pressure 5.0 Bar. Models incorporating AirConcept & GiO-Module are cold water use only. All other models have a maximum operating temperature 60°C. Modification November 2019 Supplied with Airbreak to drain.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
1909030
Expiry date:
30/09/2024
Note:
IRN’s R415 & R510 apply to products which incorporate the GiO-Modules reverse osmosis unit. This appliance incorporates a Fluid Category 5 backflow prevention device. The product is supplied with a double check valve for use on the inlet. At least a single check valve is required on each supply to this fitting because it is for a non-wholesome water application so the materials of construction have not been fully assessed against the requirements of the Regulations. The double check valve supplied with this product must be installed to maintain the validity of the WRAS approval.
Size:
¾” BSP captive nut (to inlet hose)
Marking:
Meiko, UPster on control panel. Meiko, model, product info on adhesive label on side panel.
Installation Requirements:
R001 R415 R510 R574
Model:
U M2 - Series undercounter dishwashing machines: UPster U 400, UPster U 500G, UPster U 500, TopClean 60 & TopClean M. All undercounter models except UPster U 400 can be supplied with GiO-Module. H M2 - Series hood type dishwashing machines: UPster H 500 which can be supplied with AirConcept & GiO-Module.
Factor:
MEIKO Maschinenbau GmbH & Co. KG
Company Name
MEIKO Maschinenbau GmbH & Co. KG
Address
Englertr 3 77652 Offenburg Germany

View All Listings by this Company
Manufacturer:
MEIKO Maschinenbau GmbH & Co. KG
Company Name
MEIKO Maschinenbau GmbH & Co. KG
Address
Englertr 3 77652 Offenburg Germany

View All Listings by this Company

Print This Approval


#2001345

Range of conveyor type commercial dishwashing machines. Flow is controlled via solenoid valve and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The product incorporates a nylon bodied inline strainer with a stainless steel screen as the inlet to the machine. Maximum working pressure 4.0 bar. Maximum operating temperature 60°C

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2001345
Expiry date:
31/01/2025
Size:
¾” BSP(M)
Marking:
Fagor (manufacturer) address, model no, ref no, serial no and other techcnial information on side panel. Fagor, concept on front panel.
Installation Requirements:
R001 R160 R574
Model:
CCO-120 AG CW I. CCO-120 AG CW D. CCO-120 AG HW I. CCO-120 AG HW D. CCO-160 AG CW I. CCO-160 AG CW D. CCO-160 AG HW I. CCO-160 AG HW D. Where: “AG” stand for: AIR GAP. “CW” stand for: COLD WATER. “HW” stand for: HOT WATER. “I” stand for: CONVEYOR BELT- INLET OF BASKET FROM LEFT. “D” stand for : CONVEYOR BELT- INLET OF BASKET FROM RIGHT.
Manufacturer:
Fagor Industrial S Coop.
Company Name
Fagor Industrial S Coop.
Address
Barrio Sancholopetegui 22 20560 - Oñati
Country
Spain
Phone
+34 943 71 80 30

View All Listings by this Company

Print This Approval


#2001101

Range of commercial dishwashers, glass washers and washer disinfectors, with solenoid valves incorporating a plastic strainer and plastic flow regulator controlling the flow and discharging via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5), one on the cold water supply and hot water supply lines to the washing system and another as part of the steam condenser circuit (applicable models). The appliances are available with or without a water softener (ion exchange), steam condenser and additional water supply. The products are supplied with ¾” BSP (F) x ¾” BSP (M) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet and optional ¾” BSP (M) x ¾” BSP (F) in-line strainers (incorporating a stainless steel mesh) to be installed after the double check valve assembly. Models with a steam condenser circuit include a ‘Y’-piece connector ¾” BSP (F) inlet x ¾” BSP (M) outlets to install after the double check valve or filter (if fitted) prior to the inlet hoses. Maximum working pressure 10.0 Bar. Maximum operating temperature of product and hot supply 60°C. All other inlets are cold supply only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2001101
Expiry date:
31/01/2025
Note:
These appliances incorporate Fluid Category 5 backflow protection. The double check valves supplied with this product must be installed on all available inlets to maintain the validity of the WRAS approval. Discharge to drain must be via a type AA, AB or AD air gap or in accordance with EN1717.
Size:
¾” BSP captive nut (supply hose)
Marking:
Miele on control panel. Miele, model and product info on label on rear panel. Miele, model and product info on label inside of door.
Installation Requirements:
R001 R574
Model:
Water softener (only) models: PG8504, PG8055, PG8056, Water softener and steam condenser models: PG8056U, PG8058, PG8059, PG8581, PG8582, PG8582CD, PG8583, PG8583CD, PG8591, PG8593.
Factor:
Miele Company Ltd.
Company Name
Miele Company Ltd.
Address
Fairacres Marcham Road Adington
Postcode
OX14 1TW

View All Listings by this Company
Manufacturer:
Miele & Cie. KG
Company Name
Miele & Cie. KG

View All Listings by this Company

Print This Approval


#2003381

Range of pass through commercial dishwashing machines (with a water softener - RA models, or without - R models). Flow is controlled by a solenoid valve, which incorporates a flow restrictor and a strainer, and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). . The water softener (where fitted) is located downstream of the ‘AB’ air gap. The product is supplied with a grey nylon braided EPDM lined flexible hose assembly with ¾” captive nut end connections incorporating EPDM washers. Maximum working pressure 4.0 bar. Maximum operating temperature 60°C.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2003381
Expiry date:
31/03/2025
Note:
This appliance incorporates a Fluid Category 5 backflow prevention device. Claims for flow rate are made by the manufacturer and not considered part of the listing.
Size:
¾” BSP (F) captive nut (to inlet hose).
Marking:
Comenda prime on front casing. Comenda, model, serial no., which includes date of manufacture (MMYY) as the final four digits and other technical information on adhesive label on side of unit.
Installation Requirements:
R001 R009 R520 R574
Model:
PC07 R, PC07 RA, PC09 R, PC09 RA, PC12 R, PC12 RA, HC10 R, HC10 RA, HC14 R, HC14 RA, PCXL R, PCXL RA, HCXL R & HCXL R.
Manufacturer:
COMENDA ALI GROUP SRL
Company Name
COMENDA ALI GROUP SRL
Address
VIA GALILEO GALILEI, 8 20060 CASSINA DE PECCHI MILAN
Country
ITALY

View All Listings by this Company

Print This Approval


#2001121

Range of commercial dishwashers, glass washers and washer disinfectors, with solenoid valves incorporating a plastic strainer and plastic flow regulator controlling the flow and discharging via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5), one on the cold water supply and hot water supply lines to the washing system and another as part of the steam condenser circuit (applicable models). The appliances are available with or without a water softener (ion exchange), steam condenser and additional water supply. The products are supplied with ¾” BSP (F) x ¾” BSP (M) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet and optional ¾” BSP (M) x ¾” BSP (F) in-line strainers (incorporating a stainless steel mesh) to be installed after the double check valve assembly. Models with a steam condenser circuit include a ‘Y’-piece connector ¾” BSP (F) inlet x ¾” BSP (M) outlets to install after the double check valve or filter (if fitted) prior to the inlet hoses. Maximum working pressure 10.0 Bar. Maximum operating temperature of product and hot supply 60°C. All other inlets are cold supply only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2001121
Expiry date:
31/01/2025
Note:
These appliances incorporate Fluid Category 5 backflow protection. The double check valves supplied with this product must be installed on all available inlets to maintain the validity of the WRAS approval. Discharge to drain must be via a type AA, AB or AD air gap or in accordance with EN1717.
Size:
¾” BSP captive nut (supply hose)
Marking:
W & H ON CONTROL PANEL MODEL, PRODUCT INFORMATION ON LABEL ON REAR PANEL & INSIDE OF DOOR
Installation Requirements:
R001 R574
Model:
RID 100 & RID 200
Factor:
W&H Sterilization Srl
Company Name
W&H Sterilization Srl

View All Listings by this Company

Print This Approval


#2004006

Range of hood type and undercounter commercial dishwashing machines, flow is controlled by a solenoid valve which incorporates plastic flow regulator and discharges via a Type ‘AB’ air gap (suitable for backflow protection against fluid category 5). The products are supplied with a dual layer PVC supply hose (grey outer/black inner). Maximum working pressure 3.0 Bar. Cold supply only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2004006
Expiry date:
30/04/2025
Note:
This appliance incorporates a Fluid Category 5 backflow prevention arrangement. The plastic flow regulator supplied with the solenoid must be installed to maintain the validity of this approval.
Size:
¾” BSP captive nut (Inlet hose)
Marking:
Mach on front panel. Mach, model and operating info on right side panel.
Installation Requirements:
R001
Model:
Under counter dishwasher, single skinned: MS 9451 BT, MS 9453 BT, EASY 50 BT, EASY 53 BT. Under counter dishwasher, double skinned: MS 9550T BT, MS 9551 BT, MS 9553 BT, MS 9850T BT, MS 9851 BT, MS 9853A BT. Hood-type dishwasher: MS 9100 BT, MS 9120 BT, MS 9120A BT, EASY 90 BT, MS 9600A BT.
Manufacturer:
Mach Spa
Company Name
Mach Spa
Address
Via Maggior Piovesana 154 31015 Coneglio (TV) Italy

View All Listings by this Company

Print This Approval


#2004355

Range of front loading dishwashing machines (with a water softener - RA models, or without - R models). Flow is controlled by a solenoid valve, which incorporates a flow restrictor (5.5 lpm) and a strainer, and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The water softener (where supplied) is located after the ‘AB’ air gap. The product is supplied with a grey nylon braided EPDM lined flexible hose assembly with ¾” captive nut end connections incorporating EPDM washers. Maximum working pressure 4.0 bar. Maximum operating temperature 60°C.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2004355
Expiry date:
30/04/2025
Note:
This appliance incorporates a Fluid Category 5 backflow prevention device. Claims for flow rate are made by the manufacturer and not considered part of the listing.
Size:
¾” BSP (F) captive nut (to inlet hose).
Marking:
Comenda prime on front casing. Comenda, manufacturers address, model, serial no., which includes date of manufacture (MMYY) as the final four digits and other technical information on adhesive label on side of unit.
Installation Requirements:
R001 R009 R520 R574
Model:
PF45 R, PF45 RA, HF45 R, HF45 RA, HB35 R, HB35 RA, HB34-R, PB34-R, PF46-R & PF46-RA.
Manufacturer:
COMENDA ALI GROUP SRL
Company Name
COMENDA ALI GROUP SRL
Address
VIA GALILEO GALILEI, 8 20060 CASSINA DE PECCHI MILAN
Country
ITALY

View All Listings by this Company

Print This Approval


#2006353

Range of hood type or undercounter commercial dishwashers. Flow is controlled by a solenoid valve which discharges via a type ‘AA’ air gap. Maximum working pressure 10.0 Bar. Cold water supply only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2006353
Expiry date:
30/06/2025
Size:
¾” BSP (M)
Marking:
Inoksan & name on face label. Model, Inoksan and other technical information on side panel.
Installation Requirements:
R001
Model:
BYM 102 ST (hood type) BYM 052S-W (undercounter)
Factor:
Shorrock Trichem Ltd
Company Name
Shorrock Trichem Ltd
Address
Chanters Ind Est Tyldesley Old Road Atherton
Postcode
M46 9SD
Country
Greater Manchester

View All Listings by this Company

Print This Approval


#2007074

Range of commercial dish washing machines. Flow is controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The product is supplied with stainless steel or nylon braided EPDM inlet hose. Maximum working pressure 4.0 bar. Cold water use only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2007074
Expiry date:
31/07/2025
Note:
These appliances incorporate a Fluid Category 5 backflow prevention arrangement.
Size:
Stainless steel braided EPDM lined flexible hose assembly with ¾” BSP captive nut end connection
Marking:
Colged, Eurotec, model and other product info on adhesive label on body.
Installation Requirements:
R001 R574
Model:
ISYTECH 31-11.1 ISYTECH 31-11.2 PROTECH 31-21.1 PROTECH 31-21.2 PROTECH31-21.3 TOPTECH 31-22.1 TOPTECH 31-22.2 TOPTECH 31-22.3
Manufacturer:
Eurotec Srl div Colged
Company Name
Eurotec Srl div Colged
Address
Via Provinciale Romana 6-55010 Badia Pozzeveri Italy

View All Listings by this Company

Print This Approval


#2004362

Frront loading dishwashing machines without water softener. Flow is controlled by a solenoid valve, which incorporates a flow restrictor (5.5 lpm) and a strainer, and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The product is supplied with a grey nylon braided EPDM lined flexible hose assembly with ¾” captive nut end connections incorporating EPDM washers. Maximum working pressure 4.0 bar. Maximum operating temperature 60°C.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2004362
Expiry date:
30/04/2025
Note:
This appliance incorporates a Fluid Category 5 backflow prevention device. Claims for flow rate are made by the manufacturer and not considered part of the listing.
Size:
¾” BSP (F) captive nut (to inlet hose).
Marking:
BLUE SEAL on front casing. BLUE SEAL, manufacturers address, model, serial no., which includes date of manufacture (MMYY) as the final four digits and other technical information on adhesive label on side of unit.
Installation Requirements:
R001 R009 R520 R574
Model:
SD5EC BT2 FRONT LOADING DISHASHERS
Factor:
Blue Seal Ltd
Company Name
Blue Seal Ltd
Address
Unit 67 Gravelly Business Park, Erdington, Birmingham
Postcode
B24 8TQ
Phone
0121-327 5575
General Email
sales@blue-seal.co.uk

View All Listings by this Company

Print This Approval


#2003388

Range of pass through commercial dishwashing machines without water softener Flow is controlled by a solenoid valve, which incorporates a flow restrictor and a strainer, and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The water softener (where fitted) is located downstream of the ‘AB’ air gap. The product is supplied with a grey nylon braided EPDM lined flexible hose assembly with ¾” captive nut end connections incorporating EPDM washers. Maximum working pressure 4.0 bar. Maximum operating temperature 60°C.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2003388
Expiry date:
31/03/2025
Note:
This appliance incorporates a Fluid Category 5 backflow prevention device. Claims for flow rate are made by the manufacturer and not considered part of the listing.
Size:
¾” BSP (F) captive nut (to inlet hose).
Marking:
BLUE SEAL ON FRONT BLUE SEAL, model, serial no., which includes date of manufacture (MMYY) as the final four digits and other technical information on adhesive label on side of unit.
Installation Requirements:
R001 R009 R520 R574
Model:
SH55EBT & SH120EBT DISHWASHERS
Factor:
Blue Seal Ltd
Company Name
Blue Seal Ltd
Address
Unit 67 Gravelly Business Park, Erdington, Birmingham
Postcode
B24 8TQ
Phone
0121-327 5575
General Email
sales@blue-seal.co.uk

View All Listings by this Company

Print This Approval


#2101333

Range of commercial front loading dishwashing machines with flow controlled by solenoid and discharged via type AA air gap arrangement. The products are supplied with a grey coloured PVC supply hose. Maximum working pressure 4.0 bar. Cold water supply only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2101333
Expiry date:
31/01/2026
Size:
¾” BSP captive nut PVC supply hose.
Marking:
Asber, logo, model and technical information on data plate. Asber, date of manufacture (MM/YY) on front of machine.
Installation Requirements:
R001
Model:
Asber Grand Mitte range comprising of models: GM-500 W (F SA) * GM-500 W B (F SA)* GM-500 W DD (F SA)* GM-500 W B DD (F SA)* GM-500 W UK (F SA)* GM-500 W B UK (F SA)* GM-500 W DD UK (F SA)* GM-500 W B DD UK (F SA)* GM-510 W (F SA) GM-510 W B (F SA)* GM-510 W DD (F SA)* GM-510 W B DD (F SA)* GM-510 W UK (F SA)* GM-510 W B UK (F SA)* GM-510 W DD UK (F SA)* GM-510 W B DD UK (F SA)* Asber Grand Tech range comprising of models: GT-500 W (F SA)* GT-500 W B (F SA)* GT-500 W DD (F SA)* GT-500 W B DD (F SA)* GT-500 W UK (F SA)* GT-500 W B UK (F SA)* GT-500 W DD UK (F SA)* GT-500 W B DD UK (F SA)* GT-510 W (F SA) GT-510 W B (F SA)* GT-510 W DD (F SA)* GT-510 W B DD (F SA)* GT-510 W UK (F SA)* GT-510 W B UK (F SA)* GT-510 W DD UK (F SA)* GT-510 W B DD UK (F SA)* Aquatec Rapide N B W DD UK.
Manufacturer:
ONNERA POLAND Sp. z.o.o.
Company Name
ONNERA POLAND Sp. z.o.o.
Address
Palmiry Ul Warszawska 9 05-152
Country
Czosnow

View All Listings by this Company

Print This Approval


#2103015

Range of commercial conveyor type dishwashers with the flow controlled by a solenoid valve and discharged via three type AB air gaps (pre-wash, rinse and wash) (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with a brass bodied ‘Y’-pattern strainer, brass adaptors ¾”x¾” (M)x(M) and (F)x(F) and dual layer PVC inlet hoes(s) (grey outer/black inner) and EPDM washers. The DR*11**** model has two solenoids and requires three inlet hoses and also includes a brass tee-piece to connect them ¾”x¾”x¾” (M). Maximum working pressure 6.0 bar. Maximum operating temperature 60ºC.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2103015
Expiry date:
31/03/2026
Note:
This appliance incorporates a Fluid category 5 backflow prevention device.
Size:
¾” BSP (F) to ‘Y’-pattern strainer.
Marking:
Electrolux Professional SpA and product info on adhesive label on body.
Installation Requirements:
R001 R574
Model:
DR*10**** and DR*11**** Conveyor Dishwasher machine with AB airgaps Family type description: DR = Dual Rinse rack type dishwasher. 1st "*" = Length; 0 = 44", 1 = 66", 3 = 79". 2nd "*" = Rinsing type; 0 Line pressure (out of scope), 1= Air gap. 3rd "*" = Energy saving device; 0 = none, 1 = ESD. 4th "*" = Heaters power; 0 = 22kW, 1 = 24kW, 2 = 26kW, 3 = 29kW, 4 = 40kW, 5 = 20kW, 6 = 25kW, 7 = 39kW. 5th "*" = Heating type; 0 = electric. 6th "*"= PW Heating contemporaneity; 0 = no, 1 = 7kW. 7th "*" = Drying module; 0 = none, 1 = short, 2 = large, 3 = corner.
Manufacturer:
Electrolux Professional SpA
Company Name
Electrolux Professional SpA
Address
Via Segaluzza 30 33170 Pordenone Italy

View All Listings by this Company

Print This Approval


#1907082

Range of commercial dish washing machines with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
1907082
Expiry date:
31/07/2024
Size:
¾” BSP captive nut
Marking:
MAIDAID or MAIDAID EVOLUTION ON FRONT PANEL MAIDAID, model & technical information on label on side panel
Installation Requirements:
R001 R574
Model:
C512, C512D, C612, C652, C2011, C2011D, 512GS, 512GSD, 211GS, 211GSD, D512, D2121, D3121, EVOLUTION, 402, 502, 512 2121, 2160, AM H51, AM H51D, AM H91 & AM H91D.COMMERCIAL WASHING MACHINES
Factor:
Maidaid Halcyon
Company Name
Maidaid Halcyon
Address
The Engine Shed Top Station Road Brackley
Postcode
NN13 7UG
Country
Northants
Phone
+44 (0) 1280 845300
General Email
sales@maidaid-halcyon.co.uk

View All Listings by this Company

Print This Approval


#2007085

Range of commercial dish washing machines. Flow is controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The product is supplied with stainless steel or nylon braided EPDM inlet hose. Maximum working pressure 4.0 bar. Cold water use only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2007085
Expiry date:
31/07/2025
Note:
These appliances incorporate a Fluid Category 5 backflow prevention arrangement.
Size:
Stainless steel braided EPDM lined flexible hose assembly with ¾” BSP captive nut end connection
Marking:
MINIRACK EVOLUTION ON FRONT MAIDAID & technical information on adhesive label on side of body.
Installation Requirements:
R001 R574
Model:
MINIRACK EVOLUTION R3010, R3020 & R3030 COMMERCIAL DISHWASHING MACHINES
Factor:
Maidaid Halcyon
Company Name
Maidaid Halcyon
Address
The Engine Shed Top Station Road Brackley
Postcode
NN13 7UG
Country
Northants
Phone
+44 (0) 1280 845300
General Email
sales@maidaid-halcyon.co.uk

View All Listings by this Company

Print This Approval


#2101364

Range of commercial front loading dishwashing machines with flow controlled by solenoid and discharged via type AA air gap arrangement. The products are supplied with a grey coloured PVC supply hose. Maximum working pressure 4.0 bar. Cold water supply only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2101364
Expiry date:
31/01/2026
Size:
¾” BSP captive nut PVC supply hose.
Marking:
Storm, model and Blizzard on front of machine Storm, Model, Blizzard & technical information on data plate. Asber, date of manufacture (MM/YY) on front of machine.
Installation Requirements:
R001
Model:
STORM RANGES STORM50 BT & STORM50 BTDP
Factor:
Pentland Wholesale Ltd
Company Name
Pentland Wholesale Ltd
Address
Unit 17 Walker Park Ind Est Walker Road
Postcode
BB1 2QE
Country
Blackburn

View All Listings by this Company

Print This Approval


#2107011

Range of commercial dishwashers with flow controlled by a solenoid valve and discharged via a type AB air gap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2107011
Expiry date:
31/07/2026
Size:
¾” BSP (F)
Marking:
Colged on front panel. Colged, Eurotec, model, serial number, date of manufacture (DD/MM/YYYY) and other product info on label on side panel.
Installation Requirements:
R001 R574
Model:
TopTech 34-23TD (rack 40x40), TopTech 35-23TD (rack 45x45), TopTech 36-23TD (rack 50x50), TopTech 36L-23TD (rack 50x60), TopTech 38-23TD (rack 50x50 hood type), TopTech 39-23TD (rack 50x60 hood type).
Manufacturer:
Eurotec Srl div Colged
Company Name
Eurotec Srl div Colged
Address
Via Provinciale Romana 6-55010 Badia Pozzeveri Italy

View All Listings by this Company

Print This Approval


#2107123

Range of commercial dishwashers with flow controlled by a solenoid valve and discharged via a type AB air gap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2107123
Expiry date:
31/07/2026
Size:
¾” BSP (F)
Marking:
Maidaid on front panel. Maidaid, model, serial number, date of manufacture (DD/MM/YYYY) and other product info on label on side panel.
Installation Requirements:
R001 R574
Model:
C525WS, C615WS, C2035WS, 525GS, 215GS, D525WS, EVOLUTION 425WS, EVOLUTION 525WS, EVOLUTION 535WS, EVOLUTION 2135WS, EVOLUTION 3135WS, AM H55WS & AM H95WS COMMERCIAL DISHWASHERS
Factor:
Maidaid Halcyon
Company Name
Maidaid Halcyon
Address
The Engine Shed Top Station Road Brackley
Postcode
NN13 7UG
Country
Northants
Phone
+44 (0) 1280 845300
General Email
sales@maidaid-halcyon.co.uk

View All Listings by this Company

Print This Approval


#2109354

Range of commercial front loading, hood type & utensil washer type dishwashing machines with flow controlled by solenoid and discharged via type AB air gap (verified by test - suitable for backflow protection against fluid category 5) . The products are supplied with a grey coloured PVC supply hose. Maximum working pressure 6.0 bar. Maximum operating temperature 90°C.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2109354
Expiry date:
30/09/2026
Size:
¾” BSP Captive nut.
Marking:
Hobart, manufacturers address, model no, serial no and other technical information on front casing.
Installation Requirements:
R001 R009 R520 R574
Model:
Frond loading: Design State: FG-16-01 Device Code: G404W-12B, G404SW-12B, G504W-10B, G504SW-10B, F504W-20B, F504SW-20B Design State: GCB-13-04 Device Code: ECO+G415W-10C, ECO+G415SW-10C Design State: GC-18-01 Device Code: GCW-10B, GCSW-20B, GCROIW-10B, GCPW-10B, GCPROIW-10B, GPW-10B, GPSW-10B, GPCROIW-10B Design State: FXB-12-04 Device Code: ECO+G515W-10C, ECO+G515SW-10C, ECO+F515W-10C, ECO+F515SW-10C Design State: FX-18-01 Device Code: FXW-10B, FXSW-10B, FXLW-10B, FXLSW-10B, FXSTDW-10B, careSW-10B, FPW-10B, FPSW-10B, GXCW-11B, GXCSW-11B, GXCROIW-11B, GXW-11B, GXSW-11B Hood type: Design State: AM-14-02 Device Code: H604W-12B, H604SW-12B Design State: AMB-14-03 Device Code: ECO+H615W-10C, ECO+H615SW-10C Design State: AMX-14-02 Device Code: AM900W-10B, AM900SW-10B, , AMXW-10B, AMXSW-10B ,AMXRW-10B, AMXRSW-10B, AMXXW-10B, AMXXSW-10B, AMXXRW-10B, AMXXRSW-10B, AUPW-10B, AUPSW-10B, AUPRSW-10B, AMXTW-10B, AUPTW-10B, AMXXLW-10B, AMXXLSW-10B, AUPLW-10B, AUPLSW-10B, Design State: TLW-18-01: Device Code: TLWW-10A, TLWSW-10A Utensil washer: Design State: UX-15-01 Device Code: UX-10A, UXS-10A, UXC-10A, UXCS-10A, UXRC-10A, UXRCS-10A, UXT-10A, UXTC-10A, UXTRC-10A, UXTH-10A, UXTLH-10A, UXTHR-10A, UXTLHR-10A, UP-10A, UPC-10A, UPRC-10A, UPT-10A, UPTC-10A, UPTRC-10A Design State: U-15-01 Device Code: ECOMAX702-11A, ECOMAX702W-11A Models added June 2022: Frond loading Design State: FXB-12-04 Device Code: FXBSW-10C, FXBSW-15C, FXBW-10C, FXLBSW-10C, GXBSW-11C, GXCBSW-11C Hood type Design State: AMB-14-03 Device Code: AMXBSW-10C, AMXBW-10C, AMXXBRSW-10C Utensil washer Design State: UXB-15-01 Device Code: UXB-10C, UXBS-10C, UXTB-10C, UXTHB-10C, UXTLHB-10C Explanation: “Design State” defines the type of Machine and the Production-Generation “Device Code” defines the Order Code for a special equipped machine
Manufacturer:
Hobart GmbH
Company Name
Hobart GmbH
Address
Robert-Bosch-Str. 17 77656 Offenburg
Country
Germany
Phone
+49 781 600-0

View All Listings by this Company

Print This Approval


#2203319

Range of undercounter and passthrough commerical dishwashers with flow controlled by a solenoid valve and discharged via a type AB air gap (verified by test - suitable for backflow protection against fluid category 5). The inlet hose incorporates a stainless steel strainer. Maximum working pressure 4.0 bar. Maximum operating temperature 55°C.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2203319
Expiry date:
31/03/2027
Size:
¾” BSP (F) Captive nut
Marking:
Sammic SL, manufacturers address, model, serial number, date of manufacture (MM/YYYY) and other technical information on Adhesive label on right panel.
Installation Requirements:
R001 R009 R574
Model:
Undercounter: AX-51 BC AX-51 BCD UX-50 C UX-50 SC UX-50 BC UX-50 SBC UX-50 BCD UX-50 SBCD Passthrough: AX-100 BC AX-100 BCD UX-120 C UX-120 SC UX-120 BC UX-120 SBC UX-120 BCD UX-120 SBCD
Factor:
Sammic S.L.
Company Name
Sammic S.L.
Address
C/Basarte 1 20720 Azkoitia (Gipuzkoa) Spain
Phone
Tel: +94 315 7234 Fax: +94 381 2883

View All Listings by this Company

Print This Approval


#2303308

Range of commercial dish washing machines with flow controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2303308
Expiry date:
31/03/2028
Size:
¾” BSP(F) captive nut
Marking:
Company logo Colged, address, Model No, Serial No. Brand, Date of manufacture DD/MM/YY & other technical info on adhesive label on right side panel
Installation Requirements:
R001 R574
Model:
toptech 32-23D.4 LP423CDDDWRAS toptech 32-23D.5 LP523CDDDWRAS toptech 32-23D.6 LP623CDDDWRAS toptech 32-23D.7 LP723CDDDWRAS
Manufacturer:
Eurotec Srl div Colged
Company Name
Eurotec Srl div Colged
Address
Via Provinciale Romana 6-55010 Badia Pozzeveri Italy

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.