Range of front loading commercial washing machines with flow controlled by solenoid valves and discharged via type ‘AD’ air gap (suitable for backflow protection against fluid category 5). Maximum working pressure 8.3 Bar. Maximum operating temperature 65°C

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

1906118

Expiry date:

30/06/2024

Note:

Only to be used with supply hoses with a maximum internal diameter of 13mm. No supply hose is supplied with these products. This appliance has a fluid category 5 backflow prevention device built in

Size:

¾” BSP (M)

Marking:

Alliance Laundry, model and operating info on adhesive label on rear panel

Installation Requirements:

R001

Model:

NF3JLBSG403UN01 NF3JLBSP403UN01 NF3JXASG403UN01 NF3JXASP403UN01 NF3JYASG403UW01 NT2JLASP403UN01 NT2JLASP403UW01 NT2JXASP403UN01 NT2JXASP403UW01 NT3JLASG403UW01 NT3JLASP403UN01 NT3JLASP403UW01 NT3JXASG403UW01 NT3JXASP403UN01 NT3JXASP403UW01 SF3JGBJG403UW01 SF3JGBJP403UW01 SF3JGBSP403UW01 SF3JXASG403UN01 SF3JXASP403UW01 BF3JGBJG403UN01 from September 2019 will also be known as BF3JGBJG403UN06 BF3JGBJG403UW01 from September 2019 will also be known as BF3JGBJG403UW06 BF3JGBJP403UN01 from September 2019 will also be known as BF3JGBJP403UN06 BF3JGBJP403UW01 from September 2019 will also be known as asBF3JGBJP403UW06 BF3JGBSG403UN01 from September 2019 will also be known as BF3JGBSG403UN06 BF3JGBSG403UW01 from September 2019 will also be known as BF3JGBSG403UW06 BF3JGBSP403UN01 from September 2019 will also be known as BF3JGBSP403UN06 BF3JGBSP403UW01 from September 2019 will also be known as BF3JGBSP403UW06 BF3JLBSG403UN01 from September 2019 will also be known as BF3JLBSG403UN06 BF3JLBSG403UW01 from September 2019 will also be known as BF3JLBSG403UW06 BF3JLBSP403UN01 from September 2019 will also be known as BF3JLBSP403UN06 BF3JLBSP403UW01 from September 2019 will also be known as BF3JLBSP403UW06 BF3JXASG403UN01 from September 2019 will also be known as BF3JXASG403UN06 BF3JXASP403UN01 from September 2019 will also be known as BF3JXASP403UN06 BF3JXASP403UW01 from September 2019 will also be known as BF3JXASP403UW06 BT3JGAJG403UW01 from September 2019 will also be known as BT3JGAJG403UW06 BT3JGAJP403UN01 from September 2019 will also be known as BT3JGAJP403UN06 BT3JGAJP403UW01 from September 2019 will also be known as BT3JGAJP403UW06 BT3JGASG403UW01 from September 2019 will also be known as BT3JGASG403UW06 BT3JGASP403UN01 from September 2019 will also be known as BT3JGASP403UN06 BT3JGASP403UW01 from September 2019 will also be known as BT3JGASP403UW06 BT3JLASG403UW01 from September 2019 will also be known as BT3JLASG403UW06 BT3JLASP403UN01 from September 2019 will also be known as BT3JLASP403UN06 BT3JLASP403UW01 from September 2019 will also be known as BT3JLASP403UW06 BT3JXASG403UW01 from September 2019 will also be known as BT3JXASG403UW06 BT3JXASP403UN01 from September 2019 will also be known as BT3JXASP403UN06 BT3JXASP403UW01 from September 2019 will also be known as BT3JXASP403UW06 JF3JGASP413EW01 from September 2019 will also be known as JF3JGASP413EW06 JF3JMASG413EN01 from September 2019 will also be known as JF3JMASG413EN06 JF3JRASP413EW01 from September 2019 will also be known as JF3JRASP413EW06 JF3JXASP413EW01 from September 2019 will also be known as JF3JXASP413EW06 JFNJRASP303EW01 from September 2019 will also be known as JFNJRASP303EW06 JFNJXASG303EW01 from September 2019 will also be known as JFNJXASG303EW06 JFNJXASP303EW01 from September 2019 will also be known as JFNJXASP303EW06 JT1JGASP413EW01 from September 2019 will also be known as JT1JGASP413EW06 JT1JMASG413EN01 from September 2019 will also be known as JT1JMASG413EN06 JT1JRASP413EW01 from September 2019 will also be known as JT1JRASP413EW06 JT1JXASP413EW01 from September 2019 will also be known as JT1JXASP413EW06 JT2JGASP413EW01 from September 2019 will also be known as JT2JGASP413EW06 JT2JMASG413EN01 from September 2019 will also be known as JT2JMASG413EN06 JT2JRASP413EW01 from September 2019 will also be known as JT2JRASP413EW06 JT2JXASP413EW01 from September 2019 will also be known as JT2JXASP413EW06 JTEJRASP303EW01 from September 2019 will also be known as JTEJRASP303EW06 JTEJXASP303EW01 from September 2019 will also be known as JTEJXASP303EW06 JTGJRASP303EW01 from September 2019 will also be known as JTGJRASP303EW06 JTGJXASP303EW01 from September 2019 will also be known as JTGJXASP303EW06 NF3JLBSG403UT01 from September 2019 will also be known as NF3JLBSG403UT06 NF3JLBSP403UT01 from September 2019 will also be known as NF3JLBSP403UT06 NF3JLBSP403UW01 from September 2019 will also be known as NF3JXASP403UW06 NF3JXASG403UW01 from September 2019 will also be known as NT1JLASP413UW06 NF3JXASP403UW01 from September 2019 will also be known as NT1JXASP403UW06 NT1JLASP413UW01 from September 2019 will also be known as NT2JLASP403UW06 NT1JXASP403UW01 from September 2019 will also be known as NT2JXASP403UW06 PF3JGBJG403UG01 from September 2019 will also be known as PF3JGBJG403UG06 PF3JGBJP403UG01 from September 2019 will also be known as PF3JGBJP403UG06 PF3JGBSG403UG01 from September 2019 will also be known as PF3JGBSG403UG06 PF3JGBSP403UG01 from September 2019 will also be known as PF3JGBSP403UG06 PF3JXASG403UG01 from September 2019 will also be known as PF3JXASG403UG06 PF3JXASP403UG01 from September 2019 will also be known as PF3JXASP403UG06 PFNJXASG303UG01 from September 2019 will also be known as PFNJXASG303UG06 PFNJXASP303UG01 from September 2019 will also be known as PFNJXASP303UG06 PT2JGAJG403UG01 from September 2019 will also be known as PT2JGAJG403UG06 PT2JGAJP403UG01 from September 2019 will also be known as PT2JGAJP403UG06 PT2JGASG403UG01 from September 2019 will also be known as PT2JGASG403UG06 PT2JGASP403UG01 from September 2019 will also be known as PT2JGASP403UG06 PT2JXASG403UG01 from September 2019 will also be known as PT2JXASG403UG06 PT2JXASP403UG01 from September 2019 will also be known as PT2JXASP403UG06 PT3JGAJG403UG01 from September 2019 will also be known as PT3JGAJG403UG06 PT3JGAJP403UG01 from September 2019 will also be known as PT3JGAJP403UG06 PT3JGASG403UG01 from September 2019 will also be known as PT3JGASG403UG06 PT3JGASP403UG01 from September 2019 will also be known as PT3JGASP403UG06 PT3JXASG403UG01 from September 2019 will also be known as PT3JXASG403UG06 PT3JXASP403UG01 from September 2019 will also be known as PT3JXASP403UG06 PTEJXASG303UG01 from September 2019 will also be known as PTEJXASG303UG06 PTEJXASP303UG01 from September 2019 will also be known as PTEJXASP303UG06 PTGJXASG303UG01 from September 2019 will also be known as PTGJXASG303UG06 PTGJXASP303UG01 from September 2019 will also be known as PTGJXASP303UG06 SF3JXASP403EW01 from September 2019 will also be known as SF3JXASP403EW06 ST1JXASP403EW01 from September 2019 will also be known as ST1JXASP403EW06 ST2JXASP403EW01 from September 2019 will also be known as ST2JXASP403EW06 Models added May 2021: SF3JLBSG403UG01 NF3JLBSG403UG01 SF3JLBSP403UG01 NF3JLBSP403UG01 SF3JXASP403EG01 ST3JLASG403UG01 NT3JLASG403UG01 ST3JLASP403UG01 ST3JXASP403UG01 NT3JLASP403UG01 ST1JXASP403EG01 ST2JXASP403EG01 Models added August 2021: NF3JGBJG403UG43 NF3JGBJP403UG43 NF3JGBSG403UG01 NF3JGBSP403UG01 NT2JGASP403UG01 NT3JGAJP403UG43 NT3JGASG403UG01 NT3JGASP403UG01 SF3JGBJG403UG43 SF3JGBJP403UG43 SF3JGBSG403UG01 SF3JGBSG403UN01 SF3JGBSP403UG01 SF3JGBSP403UN01 SF3NGBJG403UG44 ST2JGASP403UG01 ST2JGASP403UN01 ST3JGAJP403UG43 ST3JGASG403UG01 ST3JGASP403UG01 ST3JGASP403UN01

Manufacturer:

Alliance Laundry Systems LLC

Company Name

Alliance Laundry Systems LLC

Address

221 Shepard Street PO Box 990 Ripon

Postcode

USA

View All Listings by this Company

JLA 98 Range of front loading commercial washing machines with flow controlled by solenoid valves and discharged via type ‘AD’ air gap (suitable for backflow protection against fluid category 5). Maximum working pressure 8.3 Bar. Maximum operating temperature 65°C

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

1906135

Expiry date:

30/06/2024

Note:

Only to be used with supply hoses with a maximum internal diameter of 13mm. No supply hose is supplied with these products. This appliance has a fluid category 5 backflow prevention device built in

Size:

¾” BSP (M)

Marking:

JLA, MODEL & OPERATING INFORMATION ON ADHESIVE LABEL ON REAR PANEL

Installation Requirements:

R001

Model:

JLA 98 RANGE

Factor:

JLA Ltd

Company Name

JLA Ltd

Address

Meadowcroft Lane Ripponden West Yorkshire

Postcode

HX6 4AJ

Country

Ripponden

View All Listings by this Company

Range of front-loading domestic washing machines with flow controlled via a solenoid valve, which incorporates a plastic strainer and a flow regulator on its inlet. The product is supplied with a dual layer PVC supply hose (grey outer/black inner). Maximum working pressure 10.0 bar. Cold supply only.

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

1911053

Expiry date:

30/11/2024

Note:

No backflow prevention is built in to this machine. R160 applies to all inlets.

Size:

¾” captive nut (to supply hose).

Marking:

Vestel on front of body. Vestel, model, product type, serial number and other product info on label on back of body.

Installation Requirements:

R001 R160

Model:

XY1460CZ & XX1461CZ Where: X = Control panel design Alternatives F Series: Callisto - C, Ganymede - G, Leda - L, Himalia - H, Elara - E, Miranda - M, Titania -T, Oberon - O, Umbriel - U, Dione - D, Nix - N, Atlas - A, Juliet - J, Karma - K, Feanor - F, Rumil - R, Shiva - Y, Varuna - Z, Pandora - W. F Series-Rotated: CallistoR - C, GanymedeR - G, JulietR - J, KarmaR - K, FeanorR - F, RumilR - R. T Series: Amy - A1, Maria - A2, Julia - A3, Beth - A5, Whitney - A6, Liz - A7. Y = Door design Alternatives F series: Ø440 mm R, S, T, U, V, Y, W, X, Z, 0, 3, 4, 5. F series: Ø470 mm A, B, C, E, G, H, I, J, K, L, M, N, Q. F series: Ø510 mm 1, 2, 9. F series: Ø440 mm D0, F0, J0, O0, R0, S0, T0, U0, V0, W0, Z0, Y0, X0, P0, 50, 40, 30. F series: Ø470 mm A0, B0, C0, E0, G0, H0, I0, K0, L0, M0, N0, O0, A5, A6, A9, B1, B4, B5, B8. F series: Ø510 mm 1, 2, 9. 14 = Spin speed (1400rpm) 60 = Drum capacity (lt) - 8 kg or 61 = Drum capacity (lt) - 9 kg C - Cold water inlet Z = Control Panel Type Alternatives F Series: F2a, F2b, F2c, F4, F4C (rotared), F4E (touch), FL, FG, FT. T Series: T0, T1, T2, T2T, T3. Example model code = CA1460CFG.

Factor:

Vestal Beyaz Esya Sanayi ve Ticaret A.S.

Company Name

Vestal Beyaz Esya Sanayi ve Ticaret A.S.

Address

Vestel Beyaz Esya Camasir Makinesi Fabrikasi Manisa Organize

Country

Sanayi Bolgesi 45030

View All Listings by this Company

`Spirit proLine` range of front loading commercial washing machines with flow controlled by a solenoid and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with two dual layer PVC supply hoses with ¾” captive nuts at either end (one with a red outer/black inner, the other with a cold outer/black inner). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

1906119

Expiry date:

30/06/2024

Note:

This appliance has a fluid category 5 backflow prevention device built in. However, the units incorporate a dispensing tray/drawer prior to the ‘AB’ air gap. Therefore, no detergents, softeners or other products are to be placed within the dispenser tray/drawer that represent a risk greater than Fluid Category 3. It is the responsibility of the end user to ensure that this has been met. The approval holder does not supply or recommend any detergents, softeners or other products for use with the machines. R160 applies to all inlets.

Size:

¾” BSP captive nut (supply hoses)

Marking:

Schulthess on adhesive label on front panel. Model number, made in Switzerland, company address, date of manufacture (YYYY) and product info on adhesive label on rear panel.

Installation Requirements:

R001 R009 R160 R574

Model:

Spirit proLine WEI 9080, Spirit proLine WEI 9100, Spirit proLine WEI 9120, Spirit proLine WEI 9130, Spirit proLine WEI 9160.

Factor:

Schulthess Maschinen AG

Company Name

Schulthess Maschinen AG

Address

Landstrasse 37 Wolfhaussen Switzerland

Postcode

CH8633

Phone

0041 (0)55 253 51 11

View All Listings by this Company

Range of front-loading commercial washing machines with flow controlled by solenoid valves and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with EPDM lined supply hoses with ¾” captive nut end connections. Maximum working pressure 4.0 bar. Maximum operating temperature 54°C.

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2001368

Expiry date:

31/01/2025

Note:

This appliance incorporates a fluid category 5 backflow prevention arrangement, however, the units incorporate a dispensing tray/soap drawer prior to the ‘AB’ air gap. Therefore, no detergents, softeners or other products are to be placed within the dispenser tray/soap drawer that represent a risk greater than Fluid Category 3. It is the responsibility of the end user to ensure that this has been met. R160 applies to all inlets.

Size:

¾” BSP (F) captive nut (to supply hoses)

Marking:

Brand name (Tolon or Jensen), address, model, serial number (production date YYYY-MM) and other technical information on serial plate. Brand (Tolon or Jensen) on front casing.

Installation Requirements:

R001 R160 R574

Model:

*WE10, 15, 18, 24, 28, 40. Where * can be replaced to indicate the brand: T = Tolon or J = Jensen.

Manufacturer:

A.O.S.B

Company Name

A.O.S.B

View All Listings by this Company

Range of commercial front loaded and top loaded washing machines. Flow is controlled by a solenoid valve and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 8.0 bar. Maximum operating temperature 85ºC.

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2003023

Expiry date:

31/03/2025

Note:

This appliance incorporates a fluid category 5 backflow prevention arrangement, however, the units incorporate a dispensing tray/soap drawer prior to the ‘AB’ air gap. Therefore, no detergents, softeners or other products are to be placed within the dispenser tray/soap drawer that represent a risk greater than Fluid Category 3. It is the responsibility of the end user to ensure that this has been met. R160 applies to all inlets.

Size:

Stainless steel braided EPDM lined flexible hose assembly with ¾” captive nut end connectors.

Marking:

Electrolux on front of soap tray. Model on screen at front of sheet. Electrolux, model, date of manufacture (YYMM) and other product info on label on back of body.

Installation Requirements:

R001 R160 R574

Model:

WH6-14, WH6-20, WH6-27, WH6-33

Factor:

Electrolux Professional AB

Company Name

Electrolux Professional AB

Address

Ringvagen 1434180 Ljungby, Sweden

Phone

+46-0372-66 500

General Email

els.info@electrolux.se

View All Listings by this Company

Range of front loading commercial washing machines with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The machines are supplied with double check valve assemblies. Maximum working pressure 10 Bar Maximum operating temperature 60°C

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2006077

Expiry date:

30/06/2025

Size:

¾” BSP (F)

Marking:

Miele, model, product info on label on rear panel. Miele, model, product info on label inside of door. Miele on soap tray.

Installation Requirements:

R001 r008 R574

Model:

PWM 506 Mop Star 60, PWM 507, PWM 507 Special, PWM 507 Hygiene, PWM 508 Mopstar 80, PWM 906, PWM 907, PWM 908 Model added March 2021: PWM 307 Model added May 2022: PWM 508 All model numbers are followed by either DP or DV which indicates drain pump or drain valve.

Factor:

Miele Company Ltd.

Company Name

Miele Company Ltd.

Address

Fairacres Marcham Road Adington

Postcode

OX14 1TW

View All Listings by this Company

Manufacturer:

Miele & Cie. KG

Company Name

Miele & Cie. KG

View All Listings by this Company

Commercial clothes washing machine having a flexible inlet hose and solenoid valve with filter at the inlet supplying a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2007381

Expiry date:

31/07/2025

Size:

3/8” BSP (F) captive nut

Marking:

Electrolux on front of machine Electrolux, model no, production no and other information on data label.

Installation Requirements:

R001 R150 R574

Model:

WE1100P

Factor:

Electrolux Professional SpA

Company Name

Electrolux Professional SpA

Address

Via Segaluzza 30 33170 Pordenone Italy

View All Listings by this Company

Range of commercial washing machines with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with three ¾” x ¾” BSP (F) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet prior to a HDPE inlet hose with ¾” x ¾” captive nut end connections. Maximum working pressure 5.7 Bar. Maximum operating temperature 60°C.

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2106021

Expiry date:

30/06/2026

Note:

This appliance incorporates a Fluid Category 5 backflow prevention device. The double check valve assemblies supplied with this product must be installed on all available inlets to maintain the validity of the WRAS approval. No detergents, softeners or other products are to be placed within the dispenser compartment that represent a risk greater than Fluid Category 3.

Size:

¾” BSP (F) (to double check valve assembly)

Marking:

Alliance Laundry logo, model, serial number, product info on label on back panel. Alliance laundry logo, model, serial number on label inside of door.

Installation Requirements:

R001 R160 R574

Model:

UCEXXX, SCEXXX, HCEXXX, ICEXXX & PCEXXX XXX denotes the drum capacity and can be replaced with the following digits representing lb’s: 020, 030, 040, 060, 080 & 100.

Factor:

Alliance Laundry CE s.r.o

Company Name

Alliance Laundry CE s.r.o

Address

Místecká 1116, 742 58 Príbor

Country

Czech Republic

Phone

+420 556 768 885

View All Listings by this Company

Range of commercial front loading washing machines with flow controlled by solenoid valve and discharged via a type AD air gap arrangement (verified by test - suitable for backflow protection against fluid category 5). The product is supplied with a single check valve assembly (suitable for backflow protection against Fluid Category 2) and PEX lined rubber inlet connections hoses. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2201070

Expiry date:

31/01/2027

Size:

¾” BSP captive nut (to inlet hoses)

Marking:

Alliance CE & company details, model and other information on adhesive label on body

Installation Requirements:

R001

Model:

WM75***** C & WM85***** C RANGE OF WASHING MACHINES

Factor:

Alliance Laundry CE s.r.o

Company Name

Alliance Laundry CE s.r.o

Address

Místecká 1116, 742 58 Príbor

Country

Czech Republic

Phone

+420 556 768 885

View All Listings by this Company

Range of commercial, front loading washing machines with flow controlled by a solenoid valve and discharged via type AB air gap assembly (verified by test, suitable for backflow protection against fluid category 5). The inlets incorporate a stainless-steel strainer. Maximum working pressure 6 Bar Maximum operating temperature 85°C

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2210061

Expiry date:

31/10/2027

Size:

Hot inlet - EPDM lined flexible hose assembly with 3/4" BSP captive nut end connections Cold inlet - PVC lined flexible hose assembly with 3/4" BSP captive nut end connections.

Marking:

Girbau on control panel, Girbau, model, operating info on label on rear panel.

Installation Requirements:

R001 R160

Model:

HS7009/23 E, HS70009/23 H HS7013/30 E, HS7013/30 H, HS7013/30 V HS7018/45 E, HS7018/45 H, HS7018/45 V HS7024/60 E, HS7024/60 H, HS7024/60 V HS7028/70 E, HS7028/70 H, HS7028/70 V HS7032/80 E, HS7032/80 H, HS7032/80 V

Manufacturer:

Girbau S.A.

Company Name

Girbau S.A.

Address

Carretera de Manlleu, KM 1, 08500 VIC (Barcelona)

Country

Spain

View All Listings by this Company

Range of front loading commercial washing machines with flow controlled by solenoid valves and discharged via a type `AD` airgap (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with a dual layer composite supply hose (blue outer/black inner). Maximum working pressure 5.0 bar. Cold water use only

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2306319

Expiry date:

30/06/2028

Size:

¾” BSP(M)

Marking:

IMESA badge on front casing; IMESA, address, Model No., serial No & other tech info on data adhesive label on back of machine.

Installation Requirements:

R001 R150

Model:

S11… LM11 High spin washing 11 Kg max capacity S14… LM14 High spin washing 14 Kg max capacity S18… LM18 High spin washing 18 Kg max capacity S23… LM23 High spin washing 23 Kg max capacity S26… LM26 High spin washing 26 Kg max capacity S32… LM32 High spin washing 32 Kg max capacity R11.. RC11 Low spin washing 11 Kg max capacity R14… RC14 Low spin washing 14 Kg max capacity R18… RC18 Low spin washing 18 Kg max capacity R23… RC23 Low spin washing 23 Kg max capacity R30… RC30 Low spin washing 30 Kg max capacity R40… RC40 Low spin washing 40 Kg max capacity H18… D2W18 Aseptic barrier washing machine 18 Kg capacity H23… D2W23 Aseptic barrier washing machine 23 Kg capacity

Manufacturer:

Imesa S.p.A.

Company Name

Imesa S.p.A.

Address

Via Degli Olmi 22 31040 Cessalto (YV) Italy

View All Listings by this Company

Range of front loading commercial washing machines with flow controlled by solenoid valve and discharged via type AB air gap assembly. Maximum working pressure 6.0 Bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2306046

Expiry date:

30/06/2028

Size:

Cold inlet, PVC lined flexible hose assembly with 3/4" BSP captive nut end connections. Hot inlet, EPDM lined nylon braided flexible hose assembly with 3/4" BSP captive nut end connections.

Marking:

Girbau logo and model on front, Girbau logo, model, weight, CE, serial number, and other technical information on adhesive label on rear of body

Installation Requirements:

R001 R009 R160

Model:

HS-6008 LC-E HS-6008 LC-H HS-6008 LP-E HS-6008 LP-H HS-6008 CC-E HS-6008 CC-H HS-6013 IC-E HS-6013 IC-H HS-6013 IC-V HS-6013 LC-E HS-6013 LC-H HS-6013 LC-V HS-6013 CC-E HS-6013 CC-H HS-6013 CC-V HS-6017 IC-E HS-6017 IC-H HS-6017 IC-V HS-6017 LC-E HS-6017 LC-H HS-6017 LC-V HS-6017 CC-E HS-6017 CC-H HS-6017 CC-V HS-6024 IC-E HS-6024 IC-H HS-6024 IC-V HS-6024 LC-E HS-6024 LC-H HS-6024 LC-V HS-6024 CC-E HS-6024 CC-H HS-6024 CC-V HS-6028 IC-E HS-6028 IC-H HS-6028 IC-V HS-6028 LC-E HS-6028 LC-H HS-6028 LC-V HS-6028 CC-E HS-6028 CC-H HS-6028 CC-V HS-6032 IC-E HS-6032 IC-H HS-6032 IC-V HS-6032 LC-E HS-6032 LC-H HS-6032 LC-V HS-6032 CC-E HS-6032 CC-H HS-6032 CC-V RMS610 LC-E RMS610 LC-H RMS610 LP-E RMS610 LP-H RMS610 CC-E RMS610 CC-H RMS613 LC-E RMS613 LC-H RMS613 LC-V RMS613 LP-E RMS613 LP-H RMS613 LP-V RMS613 CC-E RMS613 CC-H RMS613 CC-V RMG613 LC-E RMG613 LC-H RMG613 LC-V RMG613 LP-E RMG613 LP-H RMG613 LP-V RMG613 CC-E RMG613 CC-H RMG613 CC-V RMS617 LC-E RMS617 LC-H RMS617 LC-V RMS617 LP-E RMS617 LP-H RMS617 LP-V RMS617 CC-E RMS617 CC-H RMS617 CC-V RMG617 LC-E RMG617 LC-H RMG617 LC-V RMG617 LP-E RMG617 LP-H RMG617 LP-V RMG617 CC-E RMG617 CC-H RMG617 CC-V RMS623 LC-E RMS623 LC-H RMS623 LC-V RMS623 LP-E RMS623 LP-H RMS623 LP-V RMS623 CC-E RMS623 CC-H RMS623 CC-V RMG623 LC-E RMG623 LC-H RMG623 LC-V RMG623 LP-E RMG623 LP-H RMG623 LP-V RMG623 CC-E RMG623 CC-H RMG623 CC-V RMS628 LC-E RMS628 LC-H RMS628 LC-V RMS628 LP-E RMS628 LP-H RMS628 LP-V RMS628 CC-E RMS628 CC-H RMS628 CC-V RMG628 LC-E RMG628 LC-H RMG628 LC-V RMG628 LP-E RMG628 LP-H RMG628 LP-V RMG628 CC-E RMG628 CC-H RMG628 CC-V Model number breakdown: HS = High Speed, Soft mounted washing machines. RMG = Medium Speed, Hard mounted washing machines. RMS = Low Speed, Hard mounted washing machines. 6XX & 6XXX = Girbau’s 6th Generation of Washer-Extractors Clothes capacity: 6008=8kg, 6013=13kg, 6017=17kg, 6024=24kg, 6028=28kg, 6032=32kg, 610=10kg, 613=13kg, 617=17kg, 623=23kg, 628=28kg. Control system: IC = Inteli Control, LC = Logi Control, LP=Logi Pro Control, CC = Coin Control Heating system: E = electrical, H = hot water, V = steam Please note that the “water configuration” of each machine depends on its capacity and its control type (LC, LP, CC, IC). It doesn’t depend on the kind of heating system (E, H, V). Thus, all models listed above are included in one of following three possible configurations of its water system: 1) Machines with 8kg and 10 kg of capacity. 2) Machines with capacity between 13kg and 32kg, whose controls are LC or LP or CC. 3) Machines with capacity between 13kg and 32kg, whose controls are IC.

Manufacturer:

Girbau S.A.

Company Name

Girbau S.A.

Address

Carretera de Manlleu, KM 1, 08500 VIC (Barcelona)

Country

Spain

View All Listings by this Company

Range of commercial washing machines with flow controlled by solenoid valves and discharged via type AB air gap assembly (verified by test - suitable for backflow protection against fluid category 5). The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5 Bar. Maximum operating temperature 60°C.

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

240102709

Expiry date:

31/01/2029

Size:

Stainless steel braided silicone lined flexible hose assemblies with 3/4" BSP captive nut end connections.

Marking:

Renzacci on front panel, Renzacci, model, product info on data plate on rear panel

Installation Requirements:

R001 R160

Model:

HS9, HS11, HS13, HS18, HS24, HS28, HS35 LX16, LX16 E-SPEED, LX22, LX22 E-SPEED, LX35, LX35 E-SPEED SX11, SX11 E-SPEED, SX14, SX14 E-SPEED, SX16, SX16 E-SPEED, SX22, SX22 E-SPEED, SX35, SX35 E-SPEED WB25, WB35 LX55, LX55 E-SPEED HS, LX, LX E-SPEED, SX, SX E-SPEED models are single door with front loading WB models are double door barrier with side loading.

Manufacturer:

Renzacci SPA – Industria Lavatrici

Company Name

Renzacci SPA – Industria Lavatrici

Address

Via Morandi, 13 - 06012 Citta Di Castello PG Italy

View All Listings by this Company