Valves

Section Code 2345 : Special combination assemblies.

Back To Directory Sections

#1904801

Range of monobloc groups, consisting of an in-line pressure reducing valve (pre-set at 3.5 bar) and an expansion relief valve - set at either 6.0 (533112) or 8.0 bar (533113) - housed within a DZR brass body and incorporating an EPDM diaphragm. The relief valve is fitted with a rotary type easing gear and the assemblies incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2). Maximum inlet supply pressure 16.0 bar. Cold water supply only.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
1904801
Expiry date:
30/04/2024
Size:
22mm compression
Marking:
Caleffi, DN20, flow arrow & CR on body. Caleffi logo, CR & flow arrow on pressure relief valve. Caleffi and technical data on cap.
Installation Requirements:
R001
Model:
533112 & 533113
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Country
Italy
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#1909315

Unvented monobloc group consisting of an in-line pressure reducing valve adjustable between 2.7 & 3.3 bar, an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) A pre-set expansion relief valve set at 6.0 bar housed in a DZR brass body with an EPDM rubber diaphragm. The expansion valve is fitted with a rotary type easing gear. Maximum inlet supply pressure 10.0 bar. Cold water use only.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
1909315
Expiry date:
30/09/2024
Size:
22mm compression
Marking:
Caleffi, flow arrow, CR, DN and technical information on body
Installation Requirements:
R001 R120
Model:
533201 CST.
Factor:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Country
Italy
Phone
+39 0322 8491
General Email
info@caleffi.com

View All Listings by this Company

Print This Approval


#1910341

Range of manually adjustable thermal balancing valves (brass body) supplied with a temperature gauge. TREG models: Maximum working pressure 10.0 bar. Maximum operating temperature 100°C. SBTREG models: For use with copper pipe, maximum working pressure 10.0. Maximum operating temperature of 95°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
1910341
Expiry date:
31/10/2024
Marking:
RWC or Reliance on body.
Installation Requirements:
R001 R120
Model:
TREG100060: ½” BSP (F). TREG100065: ¾” BSP (F). SBTREG100060: 15mm pushfit. SBTREG100065: 22mm pushfit.
Factor:
John Guest Ltd.
Company Name
John Guest Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Phone
+44 (0) 1895 449233
General Email
info@johnguest.co.uk

View All Listings by this Company
Manufacturer:
Reliance Worldwide
Company Name
Reliance Worldwide
Address
26-28 Chapman Place Eagle FarmQLD 4009 Australia
Phone
1800 810 803
General Email
info@relianceworldwide.com.au

View All Listings by this Company

Print This Approval


#1911303

Expansion group consisting of a pressure relief valve (set at 6.0 bar), incorporates check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and spherical ball valve housed within a DZR brass body. Maximum working pressure 16 bar. Maximum operating temperature 85°C

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
1911303
Expiry date:
30/11/2024
Size:
15mm compression
Marking:
Caleffi logo, flow arrow, size, CR, date of manufacture (WW/YY) on the body. ‘Caleffi’, caleffi logo, flow arrow, pressure on the PRV body
Installation Requirements:
R001 R120
Model:
528716
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Country
Italy
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2001311

Cold water inlet control group consisting of a pressure reducing valve, (adjustable between 1.5 and 3.5 bar, but are supplied pre-set from the factory at 3.0 bar) and a pressure relief valve (pre-set at 8.0 bar) housed within a DZR brass body. The product incorporates a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The pressure relief valve is fitted with a rotary type easing gear. Cold water use only. Maximum inlet supply pressure 16.0 bar.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2001311
Expiry date:
31/01/2025
Size:
22mm compression
Marking:
WRAS, CR, PN16, DN20, flow arrow and date of manufacture (D-WW-YY) on body. Reliance Water Controls on cap of pressure reducing valve. Reliance Water Controls, 8 bar, CR, flow arrow and ½” on pressure relief valve.
Installation Requirements:
R001 R120
Model:
CWIC200056
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2007376

Cold water inlet control group with a DZR brass body consisting of a pressure reducing valve, (adjustable between 2.7 and 3.3 bar, but factory set at 3.0 bar), a stainless steel strainer and a plastic bodied pressure relief valve (pre-set at 8.0 bar). The product incorporates a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The pressure relief valve is fitted with a rotary type easing gear. Maximum supply pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2007376
Expiry date:
31/07/2025
Size:
22mm compression
Marking:
Caleffi, CR and flow arrow on body.
Installation Requirements:
R001 R120
Model:
533121H CST
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Country
Italy
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2007362

Cold water inlet control group with a DZR brass body consisting of a pressure reducing valve (with an adjustbale range between 1.5 and 3.5 bar, but factory pre-set at 3.0 bar), which incorporates a stainless steel strainer, and a pressure relief valve (pre-set at 6.0 bar). The product incorporates a single check valve cartridge (verified by test, suitable for backflow protection against Fluid Category 2). The expansion valve is fitted with a rotary type easing gear. Maximum inlet supply pressure 16.0 bar. Cold water use only.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2007362
Expiry date:
31/07/2025
Size:
22mm compression.
Marking:
Reliance Water Controls and pressure on cap. PN, DN, flow arrow, size (½” on pressure relief valve), WRAS, CR and date of production DDMYY on body. Reliance on cap.
Installation Requirements:
R001
Model:
CWIC200001
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2103323

5 way manifold assembly with a DZR brass body incorporating a pressure reducing valve, with an adjustable outlet pressure range between 1.0 and 6.0 bar and a safety relief valve set at 6.0 bar. The product incorporates an inline single check valve cartridge after the balanced cold take off, verified by test (suitable for backflow protection against Fluid Category 2). Maximum supply pressure 16.0 bar. Maximum operating temperature 40°C

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2103323
Expiry date:
31/03/2026
Size:
22mm compression.
Marking:
Caleffi and DN on pressure relief valve nut. Flow arrow and CR mark on pressure relief valve. Caleffi logo, CR, pressure rating and flow arrow on safety relief valve cap.
Installation Requirements:
R001 R120
Model:
UV3 kit.
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Country
Italy
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2106036

Range of cold-water inlet control groups with DZR brass bodies consisting of an in-line, adjustable pressure reducing valve (PRV) (adjustable in the range of 0.8 bar - 6.0 bar, but factory pre-set at 3.0 or 3.5 bar - see model), strainer and a DZR brass bodied pressure relief valve (SRV) (set at 4.75 bar or 6.0 bar - see model). Products also incorporate an approved single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum supply pressure 16.0 bar. Maximum operating temperature 80°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2106036
Expiry date:
30/06/2026
Size:
22mm compression
Marking:
RBM on cap. CR, size and flow arrow on body.
Installation Requirements:
R001 R120
Model:
UVGS21822200.1 - 22mm INLET 3 BAR PRV, 4.75 BAR SRV, UNVENTED GROUP SET WITH 3/4" EXPANSION VESSEL CONNECTION. UVGS21822210.1 - 22mm INLET 3 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET WITH 3/4" EXPANSION VESSEL CONNECTION. UGVS21822211 - 22mm INLET 3.5 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET WITH 3/4" EXPANSION VESSEL CONNECTION. UVGS21822220.1 - 22mm INLET 3 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET WITH 22mm EXPANSION VESSEL CONNECTION. UVGS21822260.1 - 22mm INLET 3 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET NO VESSEL CONNECTION.
Factor:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Country
United Kingdom
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
RBM S.p.a.
Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)
Country
Italy

View All Listings by this Company

Print This Approval


#2110307

Range of 5 way inlet control group assemblies with a DZR brass body incorporating a pressure reducing valve, with an adjustable outlet pressure range between 2.7 and 3.3bar and a safety relief valve set at 8.0 bar. The product incorporates an inline single check valve cartridge after the balanced cold take off, verified by test (suitable for backflow protection against Fluid Category 2) and strainer on the inlet Maximum supply pressure 10.0 bar. Maximum operating temperature 85°C

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2110307
Expiry date:
31/10/2026
Size:
22mm compression.
Marking:
Caleffi, Caleffi logo, size, CR and flow arrow on body
Installation Requirements:
R001 R120
Model:
H0003723 H0008504
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Country
Italy
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2110005

Range of cold water inlet control groups with DZR brass bodies, consisting of a pressure reducing valve, (all models are adjustable between 1.0 and 6.0 bar, but some come pre-set from the factory - see model), a pressure relief valve (set at 6.0 or 8.0 bar - see model) and a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The pressure relief valve is fitted with a rotary type easing gear. All products for use with copper pipe manufactured to BS EN 1057. Maximum inlet supply pressure 20.0 bar. Cold water use only.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2110005
Expiry date:
31/10/2026
Size:
28mm compression inlet/outlet
Marking:
RWC, SYR, DR and flow arrow on body. RELIANCE WATER CONTROLS and pressure on cap.
Installation Requirements:
R001 R120
Model:
CWIC352300, CWIC352301, CWIC352302, CWIC352306, CWIC352310 CWIC352300 (pressure reducing valve pre-set at 3.5 bar, pressure relief valve is set at 6.0 bar). CWIC352301 (pressure reducing valve pre-set at 1.0 bar, pressure relief valve is set at 6.0 bar). CWIC352302 (pressure reducing valve pre-set at 3.5 bar, pressure relief valve is set at 6.0 bar). CWIC352303 (pressure reducing valve pre-set at 3.5 bar, pressure relief valve is set at 8.0 bar). CWIC352306 (pressure reducing valve pre-set at 2.1 bar, pressure relief valve is set at 8.0 bar). CWIC352310 (pressure reducing valve is adjustable between 1.0 & 6.0 bar, pressure relief valve set at 8 bar).
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2111316

Range of inlet control groups with DZR brass bodies incorporating an in-line, adjustable, pressure reducing valve (PRV) (adjustable range ±10% of the factory pre-set value - see model), and a pressure relief valve (SRV) (set at 3.0 bar, 4.5 bar or 6.0 bar - see model). The product incorporates a single check valve cartridge, after the pressure reducing valve, verified by test (suitable for backflow protection against Fluid Category 2). The product also incorporates an approved check valve cartridge on the angled cold water take off point, verified by test (suitable for backflow protection against Fluid Category 2). Maximum supply pressure 10.0 bar. Cold water use only.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2111316
Expiry date:
30/11/2026
Size:
22mm compression
Marking:
Caleffi name or logo, CR, flow arrow and date of manufacture (WK/YR) on body.
Installation Requirements:
R001 R120
Model:
535000 (PRV 3.0 bar/SRV 6.0 bar), 535003 (PRV 2.0 bar/SRV 6.0 bar), 535001 (PRV 3.0 bar/SRV 6.0 bar), 535002 (PRV 2.2 bar/SRV 6.0 bar), 535010 (PRV 2.2 bar/SRV 4.5 bar), 535011 (PRV 2.0 bar/SRV 3.0 bar).
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Country
Italy
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2212048

Range of thermostatic circulation valves with gunmetal bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2212048
Expiry date:
31/12/2027
Size:
Models 4226004 & 4226504: ¾” BSP (M). All other models: ½” BSP (F).
Marking:
OV, rg (denotes gunmetal), DN, PN and flow arrow on body.
Installation Requirements:
R001
Model:
Aquastrom K range comprising of product numbers: 4205904 & 4206304. Aquastrom UP-Therm range comprising of product numbers: 4225004, 4225504, 4226004, 4226504, 4225104, 4225204, 4225704, 4225304 & 4225804.
Manufacturer:
Oventrop GmbH & Co KG
Company Name
Oventrop GmbH & Co KG
Address
Paul-Oventrop-Strasse 1, 59939 Olsberg
Country
Germany

View All Listings by this Company

Print This Approval


#2303019

Range of combination valves consisting of an in-line adjustable pressure reducing valve (between 1.5 and 6.0 bar) and a pressure relief valve, with DZR Brass bodies, EPDM `O`-rings and an EPDM diaphragm. CWIC110004 model - Pressure reducing valve pre-set at 3.5 bar and pressure relief valve set at 6.0 bar. CWIC200055 model - Pressure reducing valve pre-set at 3.0 bar and pressure relief valve set at 4.5 bar. The product incorporates a stainless-steel mesh and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). For use with copper pipe (manufactured to BS EN 1057). Maximum supply pressure 16.0 bar. Outlet pressure range 1.5 bar to 6.0 bar (both models). Maximum operating temperature 20°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2303019
Expiry date:
31/03/2028
Size:
22mm compression inlet and outlet
Marking:
Reliance Water Controls and pressure on pressure reducing valve cap. WRAS, CR, flow arrow, PN & DN on body. Reliance Water Controls and pressure on relief valve cap.
Installation Requirements:
R001 R120
Model:
CWIC110004 CWIC200055
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2311011

Range of pressure reducing valve assemblies with DZR brass bodies incorporating a spherical valve, a pressure gauge and 2 inline check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). Models TVAP250001 & TVAP250005 also incorporate a water meter port. Maximum supply pressure 16 bar. Outlet pressure setting is adjustable in the range 1.5 to 6 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2311011
Expiry date:
30/11/2028
Size:
See model
Marking:
Reliance logo, flow arrow, size, PN & DR cast into body. Pressure, temperature and reliance on body of PRV.
Installation Requirements:
R001
Model:
TVAP250001 3/4” TENANT VALVE ADVANCE, TVAP250005 1” TENANT VALVE ADVANCE, TVAP250050 3/4” TENANT VALVE COMPACT TVAP250055 1” TENANT VALVE COMPACT
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2312010

Tenant valve assemblies with a DZR brass body consisting of water meter manifold, servicing valve and a pressure reducing valve (adjustable between 1.0 and 6.0 bar). The inlet incorporates two approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). Maximum working pressure 16.0 bar.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2312010
Expiry date:
31/12/2028
Size:
Please refer to model.
Marking:
SYR logo, flow arrow, DR and supplier number on body. RWC logo, PN and temperature on cap of pressure relief valve.
Installation Requirements:
R001 R120
Model:
TVAP200075 – ¾” BSP (F) inlet/outlet TVAP200080 – 1” BSP (F) inlet/outlet
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.