Valves

Section Code 2210 : Pressure relief.

Back To Directory Sections

#1906353

Range of pressure relief valves with plastic bodies and EPDM diaphragms and ‘O’-rings, Factory pre-set at 3.0 bar. Maximum operating temperature 110°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
1906353
Expiry date:
30/06/2024
Size:
See model
Marking:
Caleffi Logo, Caleffi hydronic solutions and direction of flow arrow on body. Pressure rating on lifting gear Models added March 2020: Caleffi & flow arrow on body.
Installation Requirements:
R001 R200
Model:
C312001 CST: 21.8mm. C312002 CST: 19.8mm. C312003 CST: 19.5mm. C312003 BSC: 19.5mm. C312004 CST: 19.8mm. C312004 GRD: 19.8mm. C312008: 21.8mm. C312008 GRD: 21.8mm. C312011: 22.7mm. C312011 BSC: 22.7mm. C312012: 22.25mm. C312012 STI: 22.25mm. C312013: 19.8mm. C312013 VIS: 19.8mm. C312017: 19.8mm. C312017 VIS: 19.8mm. C312018 VIS: 19.8mm. C312019: 19.8mm. C312021 FRQ : 13.38mm. C312022 CST: 19.8mm. C312023 BSC: 19.8mm. C312023 CST: 19.8mm. C312422 CST: 19.8mm Models added March 2020: C312027 BSC: 20.31mm C312009, C312009 BSC, C312009 WLF & C312009 GRD: 19mm inlet x 25mm spigot outlet.
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Country
Italy
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#1907314

Pressure relief valve (pre-set at between 2.5 & 8.0 bar depending on model), with a plastic body and EPDM shutter membrane. Maximum operating temperature 100°C

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
1907314
Expiry date:
31/07/2024
Size:
See model
Marking:
Kramer on operating member. Size & flow arrow on body
Installation Requirements:
R001
Model:
SRPP/OV-M, SRPP/O-M, SRPP/O-P20, SRPP/O-P16 models: OD 19.91mm clip connection. SRPP/MO-M & SRPP/MO-P20 models: ½” BSP (M).
Manufacturer:
Kramer Italia s.r.l.
Company Name
Kramer Italia s.r.l.
Address
V.le Brianza 27, 20127 Milano, Italy

View All Listings by this Company

Print This Approval


#1909351

`MSL & MSV` ranges of pre-set pressure relief valves with brass bodies and EPDM seats with manually operated easing gear. Maximum working pressure 10 bar. Maximum operating temperature 100°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
1909351
Expiry date:
30/09/2024
Size:
MSL/E range: ½” BSP (M) inlet x ½” BSP (F) outlet. MSV/E range: ½ BSP (M) inlet x ½” BSP (M) outlet.
Marking:
Model, size, flow arrow, Watts logo, date of manufacture (DD/MM/YY) on body.
Installation Requirements:
R001 R120
Model:
0206525 MSL/E25 – 2.5 bar. 0206530 MSL/E30 – 3.0 bar. 0206540 MSL/E40 – 4.0 bar. 0207525 MSV/E25 – 2.5 bar. 0207530 MSV/E30 – 3.0 bar. 0207540 MSV/E40 – 4.0 bar.
Manufacturer:
Watts Industries Italia S.R.L
Company Name
Watts Industries Italia S.R.L
Address
Via Brenno, 21 20046 Biassono (MI) Italy
Phone
Tel: +39 039 49861 Fax: +39 039 4986222

View All Listings by this Company

Print This Approval


#1906350

Range of pressure relief valves with DZR brass bodies incorporating EPDM diaphragms. The valves are pre-set at 6.0 bar (311560, 312469, 312461ITH & 311461 models), 10.0 bar (312020 CST model) and 7.0 bar (312471 model). Maximum operating temperature 99°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
1906350
Expiry date:
30/06/2024
Size:
See model.
Marking:
Caleffi logo, CR mark and flow arrow on body. Pressure rating on cap.
Installation Requirements:
R001
Model:
311560: ¾” BSP (F) x ¾” BSP (F), 312469: Ø19.8mm manifold x ½” BSP (F), 312020 CST: ½” BSP (M) x ½” BSP (F), 312461 ITH: Ø19.8mm manifold, 311461: ½” BSP (F) x 15mm compression, 312471 CST: Ø19.8mm manifold x ½” BSP (F). Models Added December 2020: 531661 CST – 1” BSP (F) x 1” BSP (F) 531661 - 1” BSP (F) x 1” BSP (F)
Factor:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Country
Italy
Phone
+39 0322 8491
General Email
info@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Country
Italy
Phone
+39 0322 8491
General Email
info@caleffi.com

View All Listings by this Company

Print This Approval


#1907313

Pressure relief valve (pre-set at between 2.5 & 8.0 bar depending on model), with a brass body and EPDM shutter membrane. Maximum operating temperature 100°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
1907313
Expiry date:
31/07/2024
Note:
For closed circuit use only.
Size:
SRP/F, SRPM/F, SRP/M & SRPM/M models: ½” BSP (F). SRP/O models: OD 19.91mm clip connection. SRP/O-SFL model: OD 18.25 clip connection.
Marking:
Kramer on operating member. Size & flow arrow on body.
Installation Requirements:
R001 R200
Model:
SRP/F, SRPM/F, SRP/M, SRPM/M, SRP/O & SRP/O-SFL.
Factor:
Kramer Italia s.r.l.
Company Name
Kramer Italia s.r.l.
Address
V.le Brianza 27, 20127 Milano, Italy

View All Listings by this Company

Print This Approval


#1912329

Range pressure relief valves incorporating DZR brass bodies and EPDM rubber washers. For pressures these are set at please consult the model section. The valves incorporate a manually operated rotational easing gear. Maximum operating temperature of 99°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
1912329
Expiry date:
31/12/2024
Size:
See model
Marking:
Pintossi logo on body.
Installation Requirements:
R001
Model:
582L: ½” BSP (M) x ½” BSP (F) - set @ 6.0 bar. 597L: ½” BSP (M) x 15mm - set @ 3.5 bar.
Manufacturer:
Pintossi + C Spa
Company Name
Pintossi + C Spa
Address
Via Ponte Gandovere 43/45 25064 Gussago Brescia Italy
Phone
+39 030 373 3138

View All Listings by this Company

Print This Approval


#1912349

Range pressure relief valves incorporating DZR brass bodies and EPDM rubber washers. For pressures these are set at please consult the model section. The valves incorporate a manually operated rotational easing gear. Maximum operating temperature of 99°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
1912349
Expiry date:
31/12/2024
Size:
See model
Marking:
RWC on cap
Installation Requirements:
R001
Model:
PREL107015: ½” BSP (M) x ½” BSP (F) - set @ 6.0 bar. PREL107020: ½” BSP (M) x 15mm - set @ 3.5 bar.
Factor:
Reliance Worldwide Corporation (UK) Limited
Company Name
Reliance Worldwide Corporation (UK) Limited
Address
Horton Road, West Drayton, Middlesex
Postcode
UB7 8JL

View All Listings by this Company

Print This Approval


#2003307

Range of DZR brass expansion relief valves fitted within a manifold assembly. The valves are pre-set at 8.0 bar or 6.0 bar depending on model and incorporate and EPDM membrane, NBR ‘O’-rings. Product incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 16.0 bar. Cold water use only.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
2003307
Expiry date:
31/03/2025
Size:
22mm compression.
Marking:
RWC, pressure, CR and date of manufacture (DD/MM/YY) on PRV cap. RWC, flow arrow and CR mark on manifold body.
Installation Requirements:
R001
Model:
CORE216000 – 8 bar CORE216001 – 6 bar
Manufacturer:
Reliance Worldwide Corporation UK Ltd
Company Name
Reliance Worldwide Corporation UK Ltd
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL

View All Listings by this Company

Print This Approval


#2005362

Range of pre-set pressure relief valves incorporating DZR brass bodies and an EPDM diaphragm, (for pre-set pressures see model). The valve is fitted with hand operated rotating easing gear. Maximum working pressure is the same as the pre-set pressure (see model). Maximum operating temperature 85°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
2005362
Expiry date:
31/05/2025
Size:
See model.
Marking:
All models: Reliance water control and pressure rating on cap. Date of production (A-Z = year, then A-Z, 1-9, selective lower-case letters a-r, Ω, Ø, &, Ǝ, Ⅎ, ∀ and ⊥ for week, e.g. XA, where X = 2020 and A = week 1) on cap rim. SYR, DR and flow arrow on body. Additional marking to the above: PREL102014, PREL102008, PREL102001 and PREL102004 models: 016 on body. PREL102009, PREL102110, PREL102111, PREL102003, PREL102005, PREL102105 & PREL102044 models: 047 on body. PREL102048, PREL102118, PREL102018, PREL102024, PREL102020, PREL102049, PREL102027, PREL102050 models are also marked with DN size.
Installation Requirements:
R001
Model:
PREL102014: ½” BSP (F) x ½” BSP (F) - 3.5 Bar. PREL102008: ½” BSP (F) x ½” BSP (F) - 5.0 Bar. PREL102001: ½” BSP (F) x ½” BSP (F) - 6.0 Bar. PREL102004: ½” BSP (F) x ½” BSP (F) - 8.0 Bar. PREL102009: ½” BSP (M) x 15mm compression - 3.5 Bar. PREL102110: ½” BSP (M) x 15mm compression - 4.0 Bar. PREL102111: ½” BSP (M) x 15mm compression - 4.0 Bar. PREL102003: ½” BSP (M) x 15mm compression - 5.0 Bar. PREL102005: ½” BSP (M) x 15mm compression - 6.0 Bar. PREL102105: ½” BSP (M) x 15mm compression - 6.0 Bar. PREL102044: ½” BSP (M) x 15mm compression - 8.0 Bar.
PREL102040: ½” MBSP x ½” FBSP 3.5 Bar. PREL102041: ½” MBSP x ½” FBSP 5.0 Bar. PREL102042: ½” MBSP x ½” FBSP 6.0 Bar. PREL102043: ½” MBSP x ½” FBSP 8.0 Bar. PREL102048: ¾” MBSP x ¾” FBSP 3.5 Bar. PREL102118: ¾” MBSP x ¾” FBSP 5.0 Bar. PREL102018: ¾” MBSP x ¾” FBSP 6.0 Bar. PREL102024: ¾” MBSP x ¾” FBSP 8.0 Bar. PREL102020: ¾” MBSP x 22mm 3.5 Bar. PREL102049: ¾” MBSP x 22mm 5.0 Bar. PREL102027: ¾” MBSP x 22mm 6.0 Bar. PREL102050: ¾” MBSP x 22mm 8.0 Bar. PREL102045: ¾” FBSP x ¾” FBSP 3.5 Bar. PREL102023: ¾” FBSP x ¾” FBSP 4.0 Bar. PREL102046: ¾” FBSP x ¾” FBSP 5.0 Bar. PREL102047: ¾” FBSP x ¾” FBSP 8.0 Bar.
Factor:
Reliance Worldwide Corporation (UK) Limited
Company Name
Reliance Worldwide Corporation (UK) Limited
Address
Horton Road, West Drayton, Middlesex
Postcode
UB7 8JL

View All Listings by this Company

Print This Approval


#2007021

Range of pre-set pressure relief valves with gunmetal bodies, silicon diaphragms, and PTFE seat washers. Pre-set relief pressures: 0.3 bar to 10.5 bar. Maximum operating temperature 95°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
2007021
Expiry date:
31/07/2025
Size:
½” to 3” BSP (F). DN32 to DN80 flanged.
Marking:
NABIC, DN, Model (FIG Number) and material code on body. Fig number, set pressure, temperature, year of manufacture (YY) and other technical info on adhesive label on body
Installation Requirements:
R001
Model:
Threaded Fig 542: DN15 - Part Number N-542-015. DN20 - Part Number N-542-020. DN25 - Part Number N-542-025. DN32 - Part Number N-542-032. DN40 - Part Number N-542-040. DN50 - Part Number N-542-050. DN65 - Part Number N-542-065. DN80 - Part Number N-542-080. Flanged Fig 542 F: DN32 - Part Number N-542F-032. DN40 - Part Number N-542F-040. DN50 - Part Number N-542F-050. DN65 - Part Number N-542F-065. DN80 - Part Number N-542F-080.
Manufacturer:
Crane Building Services & Utilities
Company Name
Crane Building Services & Utilities
Address
46-48 Wilbury Way, Hitchin Hertfordshire
Postcode
SG4 0UD

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 5

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.