Section Code 2050 : Diverter.
Back To Directory SectionsRange of concealed diverter valves with brass bodies and manual diverter valve with rubber seals operated using single lever, dome, wheel or cross top operating members (various finishes listed below) Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Concealed three way diverter valve with a brass body and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Concealed three way diverter valve with various body finishes and EPDM ‘O’-rings. Also supplied with various trim sets. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.
Wall mounted concealed three way diverter valve assembly (brass bodies with trim sets in various finishes). Using either a dome (00 handle) or single lever (10 handle) operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of concealed two-way self-cancelling bath to shower diverters with brass bodies and EPDM ‘O’-rings and either cross top or dome type operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C
2-way ceramic disc diverter/headwork (2 on, 1 off) with plastic body, NBR ‘O’-rings and silicone seals. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of concealed and exposed 2 way diverters (brass bodies) with fibre washers and/or NBR ‘O’-rings (XX1650 model only) or NBR ‘O’-rings (XX1721 & XX1782 models only) and either cross top or lever operating members. The inlets on XX1650 and XX1721 models Incorporating approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 65°C.
Exposed two way diverter valve (chromium plated brass) with a single lever operating member for diverting between two different shower outlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Diverter valve with a plastic body, ceramic discs & NBR ‘O’-rings. For insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of 2-way ceramic disc diverters/headworks (2 on, 1 off) with a plastic body and NBR seals to be housed in specifically dimensioned bodies. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
2-way ceramic disc diverter with a plastic body. For insertion into specifically dimensioned tap bodies. Maximum working pressure 3.0 bar. Maximum operating temperature 85°C.
Range of, two way and three way diverter valves incorporating brass bodies The valves are fitted with ceramic disc diverters or headwork, and can be supplied with or without a shutoff valve. Maximum working pressure 20.0 bar. Maximum operating temperature 80°C.
2-way ceramic disc rotary diverter valve with a plastic body and silicon seals. For insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of ceramic disc diverter valve headworks with plastic bodies for use in specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Concealed 2-way or 3-way ceramic disc diverter valve with shut off mechanism incorporating a brass body. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.
Wall mounted, concealed, two-way manual diverter valve which diverts the flow between two shower outlets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Range of diverter valves with a plastic body and ceramic discs.For insertion into specifically dimensioned bores. Maximum working pressure 10 bar. Maximum operating temperature 85°C
Range of shower bars with brass bodies (various finishes), incorporating a manual diverter with cube or dome type operating members, which diverts between an overhead shower and a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
2-way ceramic disc diverter with a plastic body, NBR ‘O’-rings and silicone seals. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Ceramic disc diverter cartridge incorporating a plastic body for use in specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Wall mounted, concealed, 2-way diverter valve (brass body and chrome trim set) with a single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Ceramic disc diverter cartridge with on/off function incorporating a plastic body, NBR ‘O’-rings and silicone seals. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Manual diverter valve controlling the flow to a hand shower or overhead shower, housed within a brass body (various finishes). Incorporating a stainless-steel strainer and approved check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 70°C.
Ceramic disc shower to shower diverter cartridge incorporating a plastic body for use in specifically dimensioned bores. Maximum working pressure 16 bar. Maximum operating temperature 65°C.
Three-way diverter valve with a stainless-steel body and stainless-steel ball. Maximum working pressure 9.8 bar Maximum operating temperature 80°C.
Range of wall mounted, concealed, 2-way diverter valve (brass body and chrome trim set) with a single lever operating member (RAKPER3020-2C) or cubed type operating member (RAKPES3020-2C). Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C
Range of manual and self cancelling diverters. PD27 is a two way manual diverter with cermamic discs without on/off function incorporating a plastic body, NBR ‘O’-rings and silicone seals. TIF22 and TIF24 are self-cancelling diverter valves. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted concealed diverter valves with a plastic body. The flow is controlled to two outlets via solenoid valves. Maximum working pressure 5.0 Bar. Maximum working temperature 65°C
Ceramic disc diverter valves with a plastic body, for insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of concealed manual diverters (brass bodies) with chrome trim sets, model RAKPES3020-1C incorporating a dome type operating member and model RAKPER3020-1C incorporating a single lever operating member. Maximum working pressure – 5.0 Bar Maximum operating temperature - 85 °C
Inline two-way manual diverter valve assembly (chrome plated brass body), incorporating a single lever operating member and an NBR rubber washer. For use with copper tube to EN1057 The product also incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of bath mixer valves with brass bodies, incorporating a ceramic cartridge headwork, single lever operating members and self cancelling diverter to bath and shower outlet. Maximum operating pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of concealed shower mixer valves with brass bodies, incorporating a ceramic cartridge headwork, single lever operating members. Model 72 668 xxx to be installed with iBox universal which is not part of this approval Maximum operating pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of concealed two way & three way ceramic disc diverters, (brass bodies – various trim sets and operating members). Maximum working pressure: 10.0 Bar
Range of manual diverter valves with chrome plated brass bodies. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted, concealed, manually operated diverters with a DZR brass body. The 5400DV model diverts to 2 outlets. The 5400DVA3 and 5400DVA4 models divert to 3 or 4 outlets respectively, and also include an off position. Maximum working pressure 5.0 bar. BS6920 60°C.
Range of concealed diverter valves with (brass bodies), incorporating a ceramic disc diverter. The product can be supplied with a trim set and dome, lever or cross top type operating members (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
2-way ceramic disc diverter incorporating a brass body, EPDM ‘O’-rings and a silicone gasket. Maximum operating temperature 85°C.
Page of 1
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
