Section Code 2050 : Diverter.
Back To Directory SectionsRange of concealed diverter valves with brass bodies and manual diverter valve with rubber seals operated using single lever, dome, wheel or cross top operating members (various finishes listed below) Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Concealed three way diverter valve with a brass body and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Concealed three way diverter valve with various body finishes and EPDM ‘O’-rings. Also supplied with various trim sets. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.
Wall mounted concealed three way diverter valve assembly (brass bodies with trim sets in various finishes). Using either a dome (00 handle) or single lever (10 handle) operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of concealed two-way self-cancelling bath to shower diverters with brass bodies and EPDM ‘O’-rings and either cross top or dome type operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C
2-way ceramic disc diverter/headwork (2 on, 1 off) with plastic body, NBR ‘O’-rings and silicone seals. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of concealed and exposed 2 way diverters (brass bodies) with fibre washers and/or NBR ‘O’-rings (XX1650 model only) or NBR ‘O’-rings (XX1721 & XX1782 models only) and either cross top or lever operating members. The inlets on XX1650 and XX1721 models Incorporating approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 65°C.
Exposed two way diverter valve (chromium plated brass) with a single lever operating member for diverting between two different shower outlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Diverter valve with a plastic body, ceramic discs & NBR ‘O’-rings. For insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of 2-way ceramic disc diverters/headworks (2 on, 1 off) with a plastic body and NBR seals to be housed in specifically dimensioned bodies. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.
2-way ceramic disc diverter with a plastic body. For insertion into specifically dimensioned tap bodies. Maximum working pressure 3.0 bar. Maximum operating temperature 85°C.
Range of, two way and three way diverter valves incorporating brass bodies The valves are fitted with ceramic disc diverters or headwork, and can be supplied with or without a shutoff valve. Maximum working pressure 20.0 bar. Maximum operating temperature 80°C.
2-way ceramic disc rotary diverter valve with a plastic body and silicon seals. For insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of ceramic disc diverter valve headworks with plastic bodies for use in specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Concealed 2-way or 3-way ceramic disc diverter valve with shut off mechanism incorporating a brass body. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.
Wall mounted, concealed, two-way manual diverter valve which diverts the flow between two shower outlets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.
Range of diverter valves with a plastic body and ceramic discs.For insertion into specifically dimensioned bores. Maximum working pressure 10 bar. Maximum operating temperature 85°C
Range of shower bars with brass bodies (various finishes), incorporating a manual diverter with cube or dome type operating members, which diverts between an overhead shower and a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
2-way ceramic disc diverter with a plastic body, NBR ‘O’-rings and silicone seals. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
Ceramic disc diverter cartridge incorporating a plastic body for use in specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
Page 1 of 2
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
