Cistern - Flushing

Section Code 2035 : Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

Back To Directory Sections

#1912910

‘Miniflo’ concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry or bottom entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush pneumatic outlet valve. The full flush can be set at 4, 5 or 6 litres and the reduced flush can be set at 2.6, 3 or 4 litres. Maximum operating pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
1912910
Expiry date:
31/12/2024
Size:
½” inlet / 2” Outlet
Marking:
Dudley & thomasdudley.co.uk moulded on inside of lid. Water level mark on inside of cistern.
Installation Requirements:
R001 R280 R556
Model:
Miniflo Concealed WC Cistern
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Address
Dauntless Works, PO Box 28, New Birmingham Road
Postcode
DY1 4SN
Country
Dudley,

View All Listings by this Company

Print This Approval


#2004906

BS EN 14055 (2010) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap with a dual flush Drop Valve (Acclaim V) or Syphon (Acclaim S) of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by lever or manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2004906
Expiry date:
30/04/2025
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Top of outlet drop valve marked ‘Dudley’ and ‘TD’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280 R556
Model:
ACCLAIM V WC CISTERN & ACCLAIM S WC CISTERN
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345

View All Listings by this Company

Print This Approval


#2001902

Concealed BS EN 14055: 2010 WC flushing cistern incorporating a side or bottom compact type float operated inlet valve providing a Type AG air gap with a dual or single flush pneumatic drop valve capable of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by touch free electronic or manual push button / push plate options. The supply hose incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2001902
Expiry date:
31/01/2025
Size:
½” BSP Male or 15mm Push-fit Inlet connection.
Marking:
Inspection covers marked Dudley, TD Logo & Thomas Dudley Ltd. Top of outlet drop valve marked ‘TD’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R556
Model:
Vantage Concealed Cistern (Category 3).
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345

View All Listings by this Company

Print This Approval


#2009910

BS EN 14055: 2018 WC flushing cistern incorporating a side or bottom compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve (Phantom T & Phantom V) or dual flush syphon (Phantom S) for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by lever or manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2009910
Expiry date:
30/09/2025
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked ‘Cascade +’ Top of Pneumatic drop valve is marked ‘TD’ Top of Cable Operated Drop Valve marked ‘Dudley Water Saving Solutions’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280 R556
Model:
Phantom S, Phantom V & Phantom T WC Cistern
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345

View All Listings by this Company

Print This Approval


#2010908

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve providing a Type AG air gap with a pneumatic or cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. The cistern is operated by a manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2010908
Expiry date:
31/10/2025
Size:
½” BSP Inlet connection.
Marking:
Top of cistern lid marked ‘DUDLEY OSMO T1’. Top of outlet drop valve marked ‘TD’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280 R556
Model:
OSMO T1 Concealed Cistern (Category 3).
Factor:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2007377

Concealed WC dual flushing cistern with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2007377
Expiry date:
31/07/2025
Size:
½” BSP (M)
Marking:
Valsir on flush plate. Valsir on body of stop vlave. Valsir on shield. Valsir on ourlet device. Valsir on body. Date of manufacture on body MM/YY. Date clock format 01/20 and 6l water line moulded on body inside cistern.
Installation Requirements:
R001 R280 R556
Model:
VS0853275UK. VS0853247UK. VS0853276UK. VS0853008UK. VS0853279UK. VS0853212UK. VS0853004UK. VS0853327UK. VS0853328UK. VS0853202UK. VS0853201UK. VS0853305UK. VS0853306UK. VS0853002UK. Models added April 2023: VS0853245UK VS0881305UK VS0853269UK Model added July 2023: VS0853052UK
Manufacturer:
Valsir Spa
Company Name
Valsir Spa
Address
Localita Merlaro 2, 2507 Vestone (Brescia)
Country
Italy
Phone
+39 365 877011

View All Listings by this Company

Print This Approval


#2012045

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012045
Expiry date:
31/12/2025
Size:
½” BSP (M)
Marking:
WDI, Manufactures Mark ''ECO'' and model number on cistern body.
Installation Requirements:
R001 R556
Model:
K301-A01-E01002 WC concealed dual flushing cistern Frame included K301-A01-E01003 WC concealed dual flushing cistern Frame included K301-B01-E01002 WC concealed dual flushing cistern Insert frame included K301-B01-E01003 WC concealed dual flushing cistern Insert frame included K301-D01-E01002 WC concealed dual flushing cistern No frame K301-D01-E01003 WC concealed dual flushing cistern No frame
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2012047

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012047
Expiry date:
31/12/2025
Size:
½” BSP (M)
Marking:
WDI, manufacturers mark (ECO) and model number on cistern.
Installation Requirements:
R001 R556
Model:
K133-A01-E01002 WC concealed dual flushing cistern Frame included K133-A01-E01003 WC concealed dual flushing cistern Frame included K133-A02-E01002 WC concealed dual flushing cistern Frame included K133-A02-E01003 WC concealed dual flushing cistern Frame included K133-D01-E01002 WC concealed dual flushing cistern No frame K133-D01-E01003 WC concealed dual flushing cistern No frame
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2012048

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012048
Expiry date:
31/12/2025
Size:
½” BSP (M)
Marking:
WDI, manufacture mark (ECO) and model number on cistern body.
Installation Requirements:
R001 R556
Model:
K210-A01-E01002 WC concealed dual flushing cistern Frame included K210-A04-E01002 WC concealed dual flushing cistern Frame included K210-D01-E01002 WC concealed dual flushing cistern No frame K210-D03-E01002 WC concealed dual flushing cistern No frame
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2012927

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a lever. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012927
Expiry date:
31/12/2025
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Part 4 Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. Part 3 Inlet valve marked T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate. Dudley on front or side of cistern.
Installation Requirements:
R001 R280 R556
Model:
Mirage WC Cistern
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345

View All Listings by this Company

Print This Approval


#2012903

BS EN 14055 (2018) concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve discharging via a type AG airgap and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. The cistern is operated by manual push button/push plate. The side entry inlet valve is mounted internally and is supplied via a stainless steel braided EPDM lined flexible hose assembly which incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012903
Expiry date:
31/12/2025
Size:
½” BSP Male or 15mm push-fit.
Marking:
Dudley, TD Logo & Thomas Dudley Ltd. on inspection cover. ‘TD’, on top of outlet drop valve. ‘HYDROFLO’ on discharge cap of inlet valve. ‘DUDLEY BS 1212/4’ on nut of inlet valve.
Installation Requirements:
R001 R280 R556
Model:
OBC Concealed Cistern (Category 3).
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345

View All Listings by this Company

Print This Approval


#2012905

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a lever. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012905
Expiry date:
31/12/2025
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Part 4 Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. Part 3 Inlet valve marked T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate. Dudley on inside of cistern lid.
Installation Requirements:
R001
Model:
Slimline WC Cistern.
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345

View All Listings by this Company

Print This Approval


#2012320

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a pneumatically operated dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve. For use with cold water only. Maximum working pressure 10.0 bar.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012320
Expiry date:
31/12/2025
Size:
½” BSP (M)
Marking:
Grohe logo on cistern & flush plate. 6L volume and water line on cistern. Date of manufacture (YYMM) & Grohe plant indentification on cistern and flush plate.
Installation Requirements:
R001 R556
Model:
38.422.10A
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Country
Germany
Phone
02372 930

View All Listings by this Company

Print This Approval


#2012321

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a pneumatically operated dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012321
Expiry date:
31/12/2025
Size:
½” BSP (M)
Marking:
Grohe logo on cistern. 6L volume and water line on cistern. Date of manufacture (YYMM) & Grohe plant indentification on cistern and flush plate.
Installation Requirements:
R001 R556
Model:
38.661.10A
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Country
Germany
Phone
02372 930

View All Listings by this Company

Print This Approval


#2007355

Concealed WC dual flushing cistern with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2007355
Expiry date:
31/07/2025
Size:
½” BSP (M)
Marking:
Valsir on flush plate. Valsir on body of stop vlave. Valsir on shield Valsir on outlet device Valsir on body Date of manufacture on body MM/YY Date clock format 01/20 6l water line moulded on body inside cistern
Installation Requirements:
R001 R280 R556
Model:
VS0858002UK TROPEA S MURARE C/FOD+RETE MECCANICA VS0858312UK TROPEA S MUR C/FOD+RETE MEC ARIAPUR 80 VS0858322UK TROPEA S MUR. C/FOD+RETE MEC ARIAPUR LED VS0858211UK TROPEA S BLOCK S90 MECC D90 VS0858321UK TROPEA S BLOCK MEC S90 D90/90 ARIAPUR 80 VS0858332UK TROPEA S BLOCK MEC S90 90/90 ARIAPUR LED
Manufacturer:
Valsir Spa
Company Name
Valsir Spa
Address
Localita Merlaro 2, 2507 Vestone (Brescia)
Country
Italy
Phone
+39 365 877011

View All Listings by this Company

Print This Approval


#2103327

WC flushing cistern incorporating a bottom entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a pnuematic push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2103327
Expiry date:
31/03/2026
Size:
½” BSP (M)
Marking:
Geberit on cistern casing. 6l water line inside cistern. Geberit on flush actuators.
Installation Requirements:
R001 R280 R560 R556
Model:
109.724.21.2 109.721.00.2 111.207.00.2 111.206.21.2
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Country
CV34 6NH
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2103302

Range of concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush outlet valve. The full flush can be set at 6 litres and the reduced flush can be set at 3 litres. The inlet supply incorporates a servicing valve. Maximum operating pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2103302
Expiry date:
31/03/2026
Size:
½” BSP (M) inlet connection
Marking:
Viega on flush operating panel. 6/3 volume on backplate within cistern.
Installation Requirements:
R001 R556
Model:
8502.38 WC cistern (without frame) 8522.38 with dry wall frame height 1120mm 8524.38 with dry wall frame height 1120mm 8530.38 with dry wall frame height 980mm
Factor:
Viega GmbH & Co KG
Company Name
Viega GmbH & Co KG
Address
Viega Platz 1, D-57439 Attendorn
Country
Germany

View All Listings by this Company
Manufacturer:
Viega GmbH & Co. KG
Company Name
Viega GmbH & Co. KG
Address
Viega Platz 1 D-57439 Attendorn
Country
Germany

View All Listings by this Company

Print This Approval


#2103303

Range of concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush outlet valve. The full flush can be set at 6 litres and the reduced flush can be set at 3 litres. The inlet supply incorporates a servicing valve. Maximum operating pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2103303
Expiry date:
31/03/2026
Size:
½” BSP (M) inlet connection.
Marking:
Viega on flush operating panel. 6/3 volume on backplate within cistern.
Installation Requirements:
R001 R556
Model:
8504.38 WC cistern (without frame) 8533.38 with dry wall frame height 820mm
Factor:
Viega GmbH & Co KG
Company Name
Viega GmbH & Co KG
Address
Viega Platz 1, D-57439 Attendorn
Country
Germany

View All Listings by this Company
Manufacturer:
Viega GmbH & Co. KG
Company Name
Viega GmbH & Co. KG
Address
Viega Platz 1 D-57439 Attendorn
Country
Germany

View All Listings by this Company

Print This Approval


#2106002

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The cistern incorporates an angled servicing valve and a stainless-steel braided EPDM lined flexible hose assembly installed prior to the inlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106002
Expiry date:
30/06/2026
Size:
½" BSP (M)
Marking:
Fluidmaster label on front of cistern. Schwab on label inside cistern and on flush plate surround.
Installation Requirements:
R001 R556
Model:
5-481-515 Concealed Cistern UP 189 - 747 (cistern only). 5-399-135 DUPLO WC 189 PREMIUM 747 FV (cistern with frame).
Manufacturer:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano CA 92675
Country
USA
Phone
00949 728 2000

View All Listings by this Company

Print This Approval


#2012089

AQUAECO RANGE OF WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012089
Expiry date:
31/12/2025
Size:
½” BSP (M)
Marking:
AQUAECO & model number on cistern body.
Installation Requirements:
R001 R556
Model:
AQP-K301-AO1-ESG2 WC CONCEALED DUAL FLUSHING CISTERN FRAME INCLUDED, AQP-K301-B01-ESG2 WC CONCEALED DUAL FLUSHING CISTERN INSERT FRAME INCLUDED & AQP-K301-DO1-ESG2WC CONCEALED DUAL FLUSHING CISTERN NO FRAME CISTERN FLUSHING
Factor:
Aquazone (UK) Ltd.
Company Name
Aquazone (UK) Ltd.
Address
Unit 1 Oakwell Park Trading Estate, Birstall, Leeds
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#2012090

AQUAECO WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012090
Expiry date:
31/12/2025
Size:
½” BSP (M)
Marking:
AQUAECO & model number on cistern.
Installation Requirements:
R001 R556
Model:
AQP-K133-A01-ESG2 WC concealed dual flushing cistern Frame included
Factor:
Aquazone (UK) Ltd.
Company Name
Aquazone (UK) Ltd.
Address
Unit 1 Oakwell Park Trading Estate, Birstall, Leeds
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#2012091

AQUAECO WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012091
Expiry date:
31/12/2025
Size:
½” BSP (M)
Marking:
AQUAECO & model number on cistern body.
Installation Requirements:
R001 R556
Model:
AQP-K210-A01-ESG2 WC concealed dual flushing cistern Frame included AQP-K210-D03-ESG2 WC concealed dual flushing cistern No frame
Factor:
Aquazone (UK) Ltd.
Company Name
Aquazone (UK) Ltd.
Address
Unit 1 Oakwell Park Trading Estate, Birstall, Leeds
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#2107002

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. There is a flow restrictor and stainless-steel strainer on the inlet valve. The cistern is operated by a manual push button. Maximum operating pressure 8.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2107002
Expiry date:
31/07/2026
Size:
½” BSP (M) inlet
Marking:
Harrisson Bathrooms Logo on body. 6L mark in cistern.
Installation Requirements:
R001 R280 R556
Model:
CISTERN002
Manufacturer:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works Keighley West Yorkshire
Postcode
BD21 4LA

View All Listings by this Company

Print This Approval


#2012102

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012102
Expiry date:
31/12/2025
Size:
½” BSP (M)
Marking:
"X" CROSSWATER LOGO & MODEL ON CISTERN BODY
Installation Requirements:
R001 R556
Model:
WCF118X50-VS+2 WC CONCEALED DUAL FLUSHING CISTERN FRAME INCLUDED WCC57X46+2 WC CONCEALED DUAL FLUSHING CISTERN NO FRAME CISTERN FLUSHING

Print This Approval


#2012103

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012103
Expiry date:
31/12/2025
Size:
½” BSP (M)
Marking:
"X" CROSSWATER LOGO & model number on cistern body.
Installation Requirements:
R001 R556
Model:
WCF82X50+2 WC concealed dual flushing cistern Frame included WCF98X50+2 WC concealed dual flushing cistern Frame included WCC47X46+2 WC concealed dual flushing cistern No frame

Print This Approval


#2012101

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012101
Expiry date:
31/12/2025
Size:
½” BSP (M)
Marking:
"X" Crosswater logo and model number on cistern.
Installation Requirements:
R001 R556
Model:
WCF118X50+2 WC concealed dual flushing cistern Frame included

Print This Approval


#2109022

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109022
Expiry date:
30/09/2026
Size:
15mm Compression Model added April 2022: ½” BSP (M)
Marking:
Fluidmaster, model and flushing volumes inside of cistern. Olympia on operating buttons. Model added April 2022: Fluidmaster, model and flushing volumes inside of cistern.
Installation Requirements:
R001 R556
Model:
T02-0100WRAS1, T02-0100WRAS2 & T02-0100WRAS3. Model added April 2022: T02-0800WRAS3
Factor:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano CA 92675
Country
USA
Phone
00949 728 2000
General Email
dmarbry@Fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster Turkey
Company Name
Fluidmaster Turkey
Address
Key Teknik Yapi Malzemeleri San Ve Tic AS
General Email

View All Listings by this Company

Print This Approval


#2110097

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2110097
Expiry date:
31/10/2026
Size:
½” BSP (M)
Marking:
Fluidmaster on cistern. Schwab brandname on operating button.
Installation Requirements:
R001 R556
Model:
5-474-025 UP FRONT-TOP 187 - 747 (cistern only). 5-398-070 DUPLO WC 187 83 cm 747 FV (cistern with frame).
Manufacturer:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano CA 92675
Country
USA
Phone
00949 728 2000

View All Listings by this Company

Print This Approval


#2106003

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106003
Expiry date:
30/06/2026
Size:
1/2” BSP (M).
Marking:
Fluidmaster and model number inside cistern.
Installation Requirements:
R001 R556
Model:
T06-0800WRAS2 3-4.5 Ltr. T06-0800WRAS1 3-4.5 Ltr. T06-0100WRAS1 3-6Ltr. T06-0100WRAS2 3-6Ltr.
Factor:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano CA 92675
Country
USA
Phone
00949 728 2000
General Email
dmarbry@Fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster Turkey
Company Name
Fluidmaster Turkey
Address
Key Teknik Yapi Malzemeleri San Ve Tic AS
General Email

View All Listings by this Company

Print This Approval


#2111035

Range of concealed WC flushing cisterns with a side entry BS 1212-4(2016) float operated inlet valve providing a type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two button assembly for a 6 or 3 litre flush volume. The cistern incorporates a servicing valve and a stainless-steel braided EPDM lined flexible hose assembly installed prior to the inlet valve. Maximum working pressure 10.0 Bar, Cold Water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111035
Expiry date:
30/11/2026
Size:
1/2" BSP (M)
Marking:
Rongji (brand of manufacturer), model number inside cistern.
Installation Requirements:
R001 R556
Model:
ET336-F ET336
Manufacturer:
Xiamen R&J Precision Technology Co., Ltd.
Company Name
Xiamen R&J Precision Technology Co., Ltd.
Address

View All Listings by this Company

Print This Approval


#2111323

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111323
Expiry date:
30/11/2026
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: OLI, OLI PLUS MEC, product date DD/MM/YY 6L waterline within cistern
Installation Requirements:
R001 R556
Model:
OLI120 PLUS MEC OLI120 PLUS PNEU
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A

View All Listings by this Company

Print This Approval


#2111356

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111356
Expiry date:
30/11/2026
Size:
½ “BSP (F) captive nut
Marking:
Vitra etched on flush plate, 6L waterline mark within cistern Vitra on Styropor cover External body states: Vitra, date of manufacture (DD/MM/YY), EN14055, 6L water level
Installation Requirements:
R001 R556
Model:
742-5805-01. 742-4805-01. 742-1735-01 (model no longer available for purchase from February 2023).
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2112322

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112322
Expiry date:
31/12/2026
Size:
½” BSP (M)
Marking:
Adhesive label below insert within cistern: OLI, actuation method, product date (DD/MM/YYYY) & OLI on flush plate 6L waterline on casing within cistern
Installation Requirements:
R001 R556 R571
Model:
Expert Plus Mec 1130 Expert Plus Mec 820 Expert Plus Pneu 1130 Expert Plus Pneu 820 Expert Plus Cable 1130 Expert Plus Cable 820
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A

View All Listings by this Company

Print This Approval


#2112331

Range of concealed WC flushing cisterns incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112331
Expiry date:
31/12/2026
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: OLI, actuation method, product date DD/MM/YY OLI etched on flush plate 6L waterline mould to casing withtin cistern
Installation Requirements:
R001 R556
Model:
OLI74 Plus Mec OLI74 Plus Pneu
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A

View All Listings by this Company

Print This Approval


#2112346

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112346
Expiry date:
31/12/2026
Size:
½” BSP (M)
Marking:
Geberit label on cistern. Month/Year date clock on rear cistern Geberit on flush plate. 6L waterline mould within cistern
Installation Requirements:
R001 R571
Model:
Geberit Omega concealed cistern 109.041.00.1 109.051.00.1 109.061.00.1 Geberit Omega Duofix frame for wall hung WC, 111.004.00.1 111.031.00.1 111.061.00.1 Model added July August 2023: 111.004.00.3
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Country
CV34 6NH
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2112907

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a lever operated dual flush syphon with full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112907
Expiry date:
31/12/2026
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Part 4 Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. Part 3 Inlet valve marked T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280 R556
Model:
Elite WC Cistern.
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345

View All Listings by this Company

Print This Approval


#2112329

WC flushing cistern incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres and incorporates a servicing valve and flexible hose on the inlet supply.The cistern is operated by a pnuematic push button Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112329
Expiry date:
31/12/2026
Size:
½” BSP (M)
Marking:
Geberit on cistern and inlet valve.
Installation Requirements:
R001 R556
Model:
109.103.21.2 109.104.21.2 109.105.00.1 458.118.21.2 458.119.21.2 458.132.00.1 Model added May 2023: 458.145.00.1 Models added March 2024: 458.151.21.1 458.152.21.1
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Country
CV34 6NH
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2112010

Concealed WC dual flushing cistern with a BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush valve is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure - 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112010
Expiry date:
31/12/2026
Size:
1/2" BSP (M)
Marking:
Geberit on push buttons, 6 litres inside cistern.
Installation Requirements:
R001 R280 R556
Model:
Geberit Concealed Cistern Type 720
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Country
CV34 6NH
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2109063

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109063
Expiry date:
30/09/2026
Size:
15mm Compression
Marking:
Noken Porcelanosa, model and flushing volumes inside of cistern. Noken on operating buttons.
Installation Requirements:
R001 R556
Model:
100294206 & 100294199 WC CISTERN
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2
Country
Spain

View All Listings by this Company

Print This Approval


#2106050

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106050
Expiry date:
30/06/2026
Size:
1/2” BSP (M).
Marking:
NOKEN & SMARTLINE ON FRONT OF CISTERN NOKEN, MODEL & FLUSH VOLUME ON INSIDE OF CISTERN
Installation Requirements:
R001 R556
Model:
100294223 3-4.5 Ltr. 100294207 3-4.5 Ltr. 100294230 3-6Ltr. 100294216 3-6Ltr.
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2
Country
Spain

View All Listings by this Company

Print This Approval


#2201033

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Incorporating a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2201033
Expiry date:
31/01/2027
Size:
½” BSP (M).
Marking:
Geberit on cistern and operating members. 6 litre mark in cistern.
Installation Requirements:
R001 R556 R581
Model:
Geberit Sigma 12cm concealed cistern 6/3 litres and Duofix wall frames: 109.309.00.5 Cistern only with push fit flush pipe, 111.352.00.5 Wall frame with cistern H112cm, less abled installation, 111.384.00.5 Wall frame with cistern H112cm, 111.383.00.5 Wall frame with cistern H112cm, wall anchors & connection bend, 111.911.00.5 Wall frame with cistern H98cm, wall anchors & connection bend. Models added July 2023: 111.383.00.3, 111.911.00.3.
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Country
CV34 6NH
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2203336

WC flushing cistern incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 5.5 litres and a reduced flush of up to 2.7 litres and incorporates a servicing valve and flexible hose on the inlet supply. The cistern is operated by a manually operated push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203336
Expiry date:
31/03/2027
Size:
½” BSP (F)
Marking:
TECE on flush plate, model number, QR code on adhesive label on frame. 6L waterline, TECE, manufacture time & date inside of cistern.
Installation Requirements:
R001 R556 R581
Model:
9300377 TECEprofil toilet module "Design" with Uni cistern, installation height 1120mm 9300329 TECEprofil toilet module "Design" with Uni cistern, installation height 980mm 9300378 TECEprofil toilet module "Design" with Uni cistern, installation height 820mm 9041336 TECEbox toilet connection unit "Design" with Uni cistern, installation height 1060mm 9041335 TECEbox toilet connection unit "Design" with Uni cistern, installation height 820mm 9400302 TECEconstruct toilet module "Professional" with Uni cistern, installation height 1120mm. 9400303 TECEconstruct toilet module "Professional" with Uni cistern, installation height 980mm 9400304 TECEconstruct toilet module "Professional" with Uni cistern, installation height 820mm Model added February 2023 9041337 TECEbox toilet connection unit "Design" with Uni cistern, installation height 980mm
Manufacturer:
TECE GmbH
Company Name
TECE GmbH
Address
Hellefeldstr. 57 48282 Emsdetten
Country
Germany

View All Listings by this Company

Print This Approval


#2203328

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203328
Expiry date:
31/03/2027
Size:
½” BSP (M)
Marking:
Vitra on flush plate and Styropor. Date of manufacture (DD/MM/YY), model & EN standard on adhesive label within cistern. 6L waterline and volume on outlet valve.
Installation Requirements:
R001 R556 R581
Model:
761-1746-01UK & 761-5826-01-UK
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2203329

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203329
Expiry date:
31/03/2027
Size:
½” BSP (M)
Marking:
Vitra on flush plate and Styropor. Date of manufacture (DD/MM/YY), model & EN standard on adhesive label within cistern. 6L waterline and volume on outlet valve.
Installation Requirements:
R001 R556 R581
Model:
761-1745-01UK & 761-5825-01-UK
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2203330

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203330
Expiry date:
31/03/2027
Size:
½” BSP (M)
Marking:
Vitra on flush plate and Styropor. Date of manufacture (DD/MM/YY), model & EN standard on adhesive label within cistern. 6L waterline and volume on outlet valve.
Installation Requirements:
R001 R556 R581
Model:
761-1740-01UK & 761-5805-01-UK
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2201058

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve and a stainless steel braided PEX lined flexible hose assembly. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2201058
Expiry date:
31/01/2027
Size:
½” BSP (M).
Marking:
WDI, ECO, model number and 6 litre line inside cistern.
Installation Requirements:
R001 R556 R581
Model:
K212-D01-E01001, K212-D03-E01001211, K212-A04-E01002, K212-A01-E01001, K212-A04-E01001, K212-A01-E01002.
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2111381

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111381
Expiry date:
30/11/2026
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: Dolphin, product date DD/MM/YY. 6L waterline within cistern
Installation Requirements:
R001 R556
Model:
DB551x.M & DB551x.P x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates mounting plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2106053

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106053
Expiry date:
30/06/2026
Size:
1/2” BSP (M).
Marking:
Vitra, flush volume and model number inside cistern. Vitra on front of cistern
Installation Requirements:
R001 R556
Model:
WC CISTERNS 760-1720-01 3-6 LTR & 760-5805-01 3-6LTR
Factor:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2112363

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112363
Expiry date:
31/12/2026
Size:
½” BSP (M)
Marking:
Dolphin logo on adhesive label below insert within cistern: 6L waterline on casing within cistern Dolphin logo on flush plate
Installation Requirements:
R001 R556 R571
Model:
DB552x.M, DB552x.M, DB552x.M, DB552x.M.1130, DB552x.P.1130 & DB552x.C.1130 concealed WC flushing cisterns ‘x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2206363

Range of concealed WC flushing cisterns incorporating a BS 1212-4 side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2206363
Expiry date:
30/06/2027
Size:
½” BSP (M).
Marking:
Geberit on adhesive label on front of cistern Model No. & other information on adhesive label within cistern 6L waterline mould on cistern.
Installation Requirements:
R001 R556 R571 R581
Model:
109.205.00.1 Geberit Kappa concealed cistern 15 cm, 6 / 3 litres, installation height 82 cm. 111.260.00.1 Geberit Duofix frame for wall-hung WC, 82 cm, with Kappa concealed cistern 15 cm. Model added July 2023: 111.260.00.3.
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Country
CV34 6NH
Phone
01926 516815

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.