Cistern - Flushing

Section Code 2035 : Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

Back To Directory Sections

#1912910

‘Miniflo’ concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry or bottom entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush pneumatic outlet valve. The full flush can be set at 4, 5 or 6 litres and the reduced flush can be set at 2.6, 3 or 4 litres. Maximum operating pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
1912910
Expiry date:
31/12/2024
Size:
½” inlet / 2” Outlet
Marking:
Dudley & thomasdudley.co.uk moulded on inside of lid. Water level mark on inside of cistern.
Installation Requirements:
R001 R280 R556
Model:
Miniflo Concealed WC Cistern
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Address
Dauntless Works, PO Box 28, New Birmingham Road
Postcode
DY1 4SN
Country
Dudley,

View All Listings by this Company

Print This Approval


#2004906

BS EN 14055 (2010) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap with a dual flush Drop Valve (Acclaim V) or Syphon (Acclaim S) of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by lever or manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2004906
Expiry date:
30/04/2025
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked either ‘Cascade +’ or ‘Dudley Turbo’ Top of outlet drop valve marked ‘Dudley’ and ‘TD’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280 R556
Model:
ACCLAIM V WC CISTERN & ACCLAIM S WC CISTERN
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345

View All Listings by this Company

Print This Approval


#2001902

Concealed BS EN 14055: 2010 WC flushing cistern incorporating a side or bottom compact type float operated inlet valve providing a Type AG air gap with a dual or single flush pneumatic drop valve capable of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by touch free electronic or manual push button / push plate options. The supply hose incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2001902
Expiry date:
31/01/2025
Size:
½” BSP Male or 15mm Push-fit Inlet connection.
Marking:
Inspection covers marked Dudley, TD Logo & Thomas Dudley Ltd. Top of outlet drop valve marked ‘TD’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R556
Model:
Vantage Concealed Cistern (Category 3).
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345

View All Listings by this Company

Print This Approval


#2009910

BS EN 14055: 2018 WC flushing cistern incorporating a side or bottom compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve (Phantom T & Phantom V) or dual flush syphon (Phantom S) for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by lever or manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2009910
Expiry date:
30/09/2025
Size:
½” BSP Male inlet connection.
Marking:
Cap of Syphon marked ‘Cascade +’ Top of Pneumatic drop valve is marked ‘TD’ Top of Cable Operated Drop Valve marked ‘Dudley Water Saving Solutions’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley or BETA (brand of Thomas Dudley) & BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280 R556
Model:
Phantom S, Phantom V & Phantom T WC Cistern
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345

View All Listings by this Company

Print This Approval


#2010908

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve providing a Type AG air gap with a pneumatic or cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. The cistern is operated by a manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2010908
Expiry date:
31/10/2025
Size:
½” BSP Inlet connection.
Marking:
Top of cistern lid marked ‘DUDLEY OSMO T1’. Top of outlet drop valve marked ‘TD’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280 R556
Model:
OSMO T1 Concealed Cistern (Category 3).
Factor:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345
General Email
info@thomasdudley.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 17

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.